I love that you don't need a proprietary mag for the power cut feature! But speaking of which - I can see a lot of power cuts simply due to magazines that don't feed properly...
Interesting how you re-designed the hop up but it takes tools to do it on-the-fly during a game. Other than that, it makes for a better "realistic" feeling to have a power cut-off when you are out of ammo. Respect from Argentina
Very nice. I remember G&G showing off a split GB in 2013, 2015, summer 2019; and now 2022, but there has been more R&D. Looks promising for Milsim'ers. I hope someone makes a wedge-lock rear-receiver pin to delete receiver wobbles..
@@XoXENOMORPHoX I had an ICS PAR MKII-C split GB. Not a fan. For me, the lower and upper tolerances were too loose. Even using an aft and forward wedge receiver pins, I could not remove the wobble between the two receivers.
This looks very nice, there are a few things that I would like to see though: -Dean type connector (clearly the superior system) -no stuff in the buffer tube, just the cable (I saw the fuse in the video) -please make a .308 version ouf of this (I run the TR16 .308 MBR as my primary and I love it) -make sure the cable connection inside the buffer tube is easy to reach (this is a nightmare on the TR16 models)
from a player point of view this looks awesome from a player that techs there own airsoft it looks like too much to want to deal with cause of proprietary parts, sensors in known spots for filth to build up, and just overall points of failure -cough- etu -cough- will be watching with hopeful eyes though
Some cool innovations there, if it holds reliable then it will be a good step in the right direction. Apart from the obvious, how much of the new system is proprietary? With AEG tech dev moving at the pace and with a long way still to go, HPA will probably be obsolete again at some point.
Really interesting design, will you be able to swap out the furniture to give it let's say a M4A1 Block II look or are we stuck with this stock and rail?
Okay so love the functioning bolt release and sensor, the hopup chamber lockin into place and ir sensor are cool, the split gearbox and quick change mosfet are Awesome. But I'm not sure I'm a fan of the new hopup ans how to adjust it, and I hope it gets wired to deans. Still very impressed
Its kind of cool. Concept buf i would prefer a regular hopup instead of needing a tool. Hopefully the auto stop feature can be toggled on and off and its actually good. The problem with these is they are either dogshit or require proprietary mags. Prime example is the vfc mp7 aep where it causes stopages or jams. The only good aep is The echo 1 tec 9.
Nightmare for techs waiting to happen. Does every goddamn moving part need an IR sensor these days? Install IR into your wallet so it will tell you you’re losing money.
The locking hopup chamber is great to see for air seal consistency, but will the chamber allow for choice of nub/bucking/rhop patches? Requiring a tool to adjust the hopup seems a step backwards compared to the rotary dial, but I get there's no more room with the new hopup chamber lock. Would have liked to see a longer nozzle design to reach through both the chamber lock and the rotary adjustment since the split gearbox will be proprietary anyway. With the IR sensor watching for bb's, will there be issues during the rain if the bb's get wet, which then get water on the sensor?
I hate to throw shade on something I've never used/seen used, but having a 'Quick Change Mosfet' sounds like there's a reason you'd need to be able to quickly change the mosfet in the first place, as in it craps out every chance it gets. I hope that's not the case, but DAMN this gun is proprietary af...
Looks like a good next gen move for airsoft. Although as mentioned, think access to the hop should be on top, aln key size for example. Easier to manage in the field if needed. BUT good job. How about recoild as standard in airsoft, if players want realism?
First, I would like to get better performance, for realism is gas blowback still the best. When $400 guns perform like custom build guns then we are their.
was thinking the same thing especially the sensor in the hop unit cause dirt and debris is very prevalent or prone to be inserted with every mag change during gameplay
@@Darkmer666 correct. I do like that g&g are pushing new ideas but I would like to see more simple gear boxes, with less gimmicks and better output. I'd love to see companies go a little off the reservation when it comes to builds, they don't always have to replicate real weapons.....some futuristic yet realistic rifles . I don't need light sensors and abnormal hop ups heck I don't even need super high rate of fire. Gimme something I can modify and customize really easy ( basically a m4 variant with a V2 ) and I'm happy.
Not touching this til it passes a serious testing/break in period with the market but looks cutting edge and promising. Also we need some tungsten gray/FDE finishes, please not another completely black gun.
Quick Question, is this available to HPA? or to swap handguards? because I think since the Hopup chamber is so stable and seemingly connected to the gearbox, It could make HPA much quieter and more efficient.
the electronics are a disaster and no-were to buy new ones. I know 2 x cases of failed guns and now they are useless - so G&G, from where you can buy a new SGR556 gearbox or electronics?
Looks awesome but there is no way id buy it with a hop adjustment like that! seems crazy design if you cant adjust in the field. Let me know when you have a rifle with all these features but a better hop adjustment and I would have already pre ordered.
An LED screen on the back of the pistol grip for programming the mosfet like paintball markers did 20 years ago would be cool. I hate the whole song and dance of pull trigger 3 times hold for 3 seconds wait for 3 beeps now scroll through the beeps, reference your programming card (which you will loose) now do a Lil dance and drink a lil watta and it’s not doing what you want,is crap. LED menu screens, it’s not new I’ve had em on paintball for quite some time now. Ffs.
@@chrisscott7123 I believe its out already. I want to buy one but with shipping and taxes your looking at more than $540 I want to buy one but i can't justify paying that. Its MSRP is around 480 from what i see. I'm fine with that, paying 510 or 520 cool but any more with taxes and such i can't
G&G is so tone deaf. Cant sell a gun with a billet gearbox. So they redesign something that does not need to be redesigned with 100% proprietary parts. Problem is the parts are just as shit as they can be, and you cant buy better aftermarket parts because it is proprietary. This is how companies die.
What airsoft comes with a billet gearbox outa the box from G&G? And I 100% agree with these proprietary parts.....but G&G is trying to become the new standard.... they should have just put the IR sensors in a STANDARD m4 hopup like Maxx does with their tracer setup...
@@chrisapolinar1102 Why can I buy a paintball gun for $200 that lasts forever and is made from 7075 billet aluminum, but cant get just a billet gearbox in a $300-$500 AEG. Why cant I get a stainless steel cylinder, aluminum cylinder head, decent piston/head, gears that are not sintered, a mosfet/ETU that is not garbage, a motor that is not junk, stainless steel barrel, deans connectors, and so on. I'm not just talking about G&G, I'm talking about all airsoft companies. G&G cant do hardly any of these things. I do love this stock though, looks like it has actual battery storage. My point is, why are they redesigning something that does not need to be redesigned. Make the current design as good as you can. No, they make the current design as CHEAP as they can, then decide to completely redesign the whole gun. It looks to have way more moving parts, failure points, over complicated.... They will use cheap parts as always and you wont be able to replace them because they will be proprietary. How hard will it be to get replacement parts? IME it is not easy getting parts. I enjoy working on airsoft guns more than I like playing. A lot of people share this sentiment. People what to purpose build their guns for certain situations. This limits that. It is just a bad idea and will 100% fail.
@Sean Price Well if you make a shit gearbox, it does not matter the material it is made from. Billet is a superior material though. Cast pot metal is very inconsistent. You could take 100 stock gearboxes from the same factory and they would all have different alloy compositions. They just throw scrap metals in a pot and melt it. Mostly Zinc and other low melting point metals. It is literally the dog food of metal. It is sad that is what they use for such a high stress part. I've never had a billet shell crack, I've seen 100s of stock shells crack. They even make the receivers out of pot metal. Seen many broken receivers as well. I like Negative Airsoft, but he is just stubborn sometimes, and other times he is just wrong. His channel is for entertainment, not information. Just because you like someone does not mean you need to listen to everything they say. That is how "Flat Earth Theory" started. To say billet gearboxes are "shit" is just silly. Maybe the billet gearbox he had was shit. If I remember, he had a billet split gearbox shell from Aliexpress. No wonder he thought it was shit. Companies pay pennies for the shells they make, billet would cost them dollars. Dollars customers would be willing to spend extra for a product that wont crack, ever. Give me a good reason that they are shit.
Why do you guys have a need to "invent" something just for the sake of it? There's absolutely zero advantage of using that hopup chamber design. Zero... Also a cheap membrane remote for a mosfet? Same one chinese LED strips come with? Really?
@@pauls.5815 i feel like youve had a bad experience with G&G. The ETUs are a little hit or miss yes, but the internals on this "boring m4" aernt exactly boring. I look forward to the SGR556 releasing. G&G has always been in the aspect of gearbox innovation, not necessarily replica body innovation. The G2/G2H was a solid gearbox, and the G3 should be the same. If you dont like what G&G does, dont buy it. There, fixed your issue 🤷♂️
Think they should learn how to make airsoft guns more cheaper while keeping the same quality to make it more accessible to those that want to join the hobby, rather than make this
![[건탱크] G&G SGR556 AEG 분해 및 조립 리뷰입니다.](http://i.ytimg.com/vi/471_PZ9pcR8/mqdefault.jpg)
I love that you don't need a proprietary mag for the power cut feature!
But speaking of which - I can see a lot of power cuts simply due to magazines that don't feed properly...
Interesting how you re-designed the hop up but it takes tools to do it on-the-fly during a game. Other than that, it makes for a better "realistic" feeling to have a power cut-off when you are out of ammo. Respect from Argentina
tbh many people run with a multitool
once set, it should be good... i only set my hop once a gameday so... but this hop looks like it's going to keep a better airseal potentially?
'Realistic' until you actually shoot it and hear that trademark AEG sound
@@iota515 and no blowback LOL
I have never seen an airsoft player make hop up adjustments on an aeg in the field.
ah man, that beaming smile you always have when your first starting airsoft and you unpack a G&G rifle, that first triggerpull never gets old
Very nice. I remember G&G showing off a split GB in 2013, 2015, summer 2019; and now 2022, but there has been more R&D. Looks promising for Milsim'ers. I hope someone makes a wedge-lock rear-receiver pin to delete receiver wobbles..
Ics have split gearbox design I like how easy it is to change a spring could do it in 30 seconds wish more manufacturers would do it
Split gearbox doesn´t add anything specifically useful for milssim. Cut of energy does.
@@XoXENOMORPHoX I had an ICS PAR MKII-C split GB. Not a fan. For me, the lower and upper tolerances were too loose. Even using an aft and forward wedge receiver pins, I could not remove the wobble between the two receivers.
@@Winters11 You mean "cut-off" for the magazine? I really like that function in the 2018 Gen1 KWA Ronin
This looks very nice, there are a few things that I would like to see though:
-Dean type connector (clearly the superior system)
-no stuff in the buffer tube, just the cable (I saw the fuse in the video)
-please make a .308 version ouf of this (I run the TR16 .308 MBR as my primary and I love it)
-make sure the cable connection inside the buffer tube is easy to reach (this is a nightmare on the TR16 models)
Big fan of G&G
from a player point of view this looks awesome
from a player that techs there own airsoft it looks like too much to want to deal with cause of proprietary parts, sensors in known spots for filth to build up, and just overall points of failure -cough- etu -cough-
will be watching with hopeful eyes though
Some cool innovations there, if it holds reliable then it will be a good step in the right direction. Apart from the obvious, how much of the new system is proprietary? With AEG tech dev moving at the pace and with a long way still to go, HPA will probably be obsolete again at some point.
Really interesting design, will you be able to swap out the furniture to give it let's say a M4A1 Block II look or are we stuck with this stock and rail?
When’s it gonna be in stock in the uk?
Okay so love the functioning bolt release and sensor, the hopup chamber lockin into place and ir sensor are cool, the split gearbox and quick change mosfet are Awesome. But I'm not sure I'm a fan of the new hopup ans how to adjust it, and I hope it gets wired to deans. Still very impressed
yes get rid of that tamiya pls
Xt60
make this rifle with a traditional hop up system. No tools, can adjust on the fly, and upgradeable. Dont fix what aint broke
Its kind of cool. Concept buf i would prefer a regular hopup instead of needing a tool. Hopefully the auto stop
feature can be toggled on and off and its actually good. The problem with these is they are either dogshit or require proprietary mags. Prime example is the vfc mp7 aep where it causes stopages or jams. The only good aep is The echo 1 tec 9.
amazing 😄 why is there only this video and no other announcements ? This is a huge step forward.
Because it won't work properly
They cant even sell a an AEG with a billet gearbox. This will fail hard. You are probably young and don't understand life yet.
well this was already foiund in 2008 by systema 😆
Nightmare for techs waiting to happen. Does every goddamn moving part need an IR sensor these days? Install IR into your wallet so it will tell you you’re losing money.
Look at all these sensors and electronic devices.
I hope they don't fail as fast as your MOSFETs do.
The locking hopup chamber is great to see for air seal consistency, but will the chamber allow for choice of nub/bucking/rhop patches? Requiring a tool to adjust the hopup seems a step backwards compared to the rotary dial, but I get there's no more room with the new hopup chamber lock. Would have liked to see a longer nozzle design to reach through both the chamber lock and the rotary adjustment since the split gearbox will be proprietary anyway. With the IR sensor watching for bb's, will there be issues during the rain if the bb's get wet, which then get water on the sensor?
That's a lot of electronics to fry. How's it work in the rain?
Probably the same as any other AEG
Same amount ' ics rain is not a issue," or with a Jefftron MOSFET the all coated
I hate to throw shade on something I've never used/seen used, but having a 'Quick Change Mosfet' sounds like there's a reason you'd need to be able to quickly change the mosfet in the first place, as in it craps out every chance it gets. I hope that's not the case, but DAMN this gun is proprietary af...
Looks like a good next gen move for airsoft. Although as mentioned, think access to the hop should be on top, aln key size for example. Easier to manage in the field if needed. BUT good job. How about recoild as standard in airsoft, if players want realism?
First, I would like to get better performance, for realism is gas blowback still the best. When $400 guns perform like custom build guns then we are their.
構造や機能については、もう完全に最先端ですね。そして解説動画も分かり易い。
Is this supposed to be out? I can't find it on any UK webstore?
3 and 5 round Shots on german Version too?
I'm sure it's a great rifle but the way we play with these there are just too many things to fail and they seem very proprietary.
was thinking the same thing especially the sensor in the hop unit cause dirt and debris is very prevalent or prone to be inserted with every mag change during gameplay
@@Darkmer666 correct. I do like that g&g are pushing new ideas but I would like to see more simple gear boxes, with less gimmicks and better output. I'd love to see companies go a little off the reservation when it comes to builds, they don't always have to replicate real weapons.....some futuristic yet realistic rifles . I don't need light sensors and abnormal hop ups heck I don't even need super high rate of fire. Gimme something I can modify and customize really easy ( basically a m4 variant with a V2 ) and I'm happy.
Not touching this til it passes a serious testing/break in period with the market but looks cutting edge and promising. Also we need some tungsten gray/FDE finishes, please not another completely black gun.
Waiting to arrive in Brazil!
Por onde comprar?
Ok so I’m gonna call it: it’s Dec 31st 2022 and that referenced release date has about a 90% chance of being not true within 24 hours. 😂
What kind of battery should i get for this gun?
can we get a price for this specific rifle
Are there ar15/m16/m4 style guns with a 4 position safety selector by you guys?
Will there be a 16 inch version?
啥時上市？～
3 kilos, that’s a weighty beast!
Is the receiver made of 6061 aluminum?
Of course not
I like everything but the way the hop-up unit requires a tool
When's the release expected?
Does this have EBB?
No
Does anyone know the release date is
Why mini tamiya? 🤷🤦
Release date?
Expected MAP price?
Выглядит круто
와우~ 언제 만날수 있나요?
Simply wonderful...
Absolutely awesome
Superb, finally Airsoft has cough up with paintball, bloody well done G&G
How??? This is for the most part just gimmicks on proprietary garbage
Proprietary who???
看起來超棒的!!
Quick Question, is this available to HPA? or to swap handguards? because I think since the Hopup chamber is so stable and seemingly connected to the gearbox, It could make HPA much quieter and more efficient.
Dawg this vid is all about the new gearbox and you're still on about HPA?
quanto mais sensor pior fica na hora do concerto!
the electronics are a disaster and no-were to buy new ones. I know 2 x cases of failed guns and now they are useless - so G&G, from where you can buy a new SGR556 gearbox or electronics?
Send me one to dsg and maybe I'll be a believer then
Looks awesome but there is no way id buy it with a hop adjustment like that! seems crazy design if you cant adjust in the field. Let me know when you have a rifle with all these features but a better hop adjustment and I would have already pre ordered.
An LED screen on the back of the pistol grip for programming the mosfet like paintball markers did 20 years ago would be cool. I hate the whole song and dance of pull trigger 3 times hold for 3 seconds wait for 3 beeps now scroll through the beeps, reference your programming card (which you will loose) now do a Lil dance and drink a lil watta and it’s not doing what you want,is crap. LED menu screens, it’s not new I’ve had em on paintball for quite some time now. Ffs.
Looks epic
Ready to buy. Let me buy it early and do a review.
Do you know the release date
@@chrisscott7123 I believe its out already. I want to buy one but with shipping and taxes your looking at more than $540
I want to buy one but i can't justify paying that.
Its MSRP is around 480 from what i see. I'm fine with that, paying 510 or 520 cool but any more with taxes and such i can't
okay this is epic
G&G is so tone deaf. Cant sell a gun with a billet gearbox. So they redesign something that does not need to be redesigned with 100% proprietary parts. Problem is the parts are just as shit as they can be, and you cant buy better aftermarket parts because it is proprietary. This is how companies die.
What airsoft comes with a billet gearbox outa the box from G&G? And I 100% agree with these proprietary parts.....but G&G is trying to become the new standard.... they should have just put the IR sensors in a STANDARD m4 hopup like Maxx does with their tracer setup...
@@chrisapolinar1102 Why can I buy a paintball gun for $200 that lasts forever and is made from 7075 billet aluminum, but cant get just a billet gearbox in a $300-$500 AEG. Why cant I get a stainless steel cylinder, aluminum cylinder head, decent piston/head, gears that are not sintered, a mosfet/ETU that is not garbage, a motor that is not junk, stainless steel barrel, deans connectors, and so on. I'm not just talking about G&G, I'm talking about all airsoft companies. G&G cant do hardly any of these things. I do love this stock though, looks like it has actual battery storage. My point is, why are they redesigning something that does not need to be redesigned. Make the current design as good as you can. No, they make the current design as CHEAP as they can, then decide to completely redesign the whole gun. It looks to have way more moving parts, failure points, over complicated.... They will use cheap parts as always and you wont be able to replace them because they will be proprietary. How hard will it be to get replacement parts? IME it is not easy getting parts. I enjoy working on airsoft guns more than I like playing. A lot of people share this sentiment. People what to purpose build their guns for certain situations. This limits that. It is just a bad idea and will 100% fail.
@@pauls.5815 uuuhhh did you NOT understand that I was agreeing with you? Lol
@Sean Price Well if you make a shit gearbox, it does not matter the material it is made from. Billet is a superior material though. Cast pot metal is very inconsistent. You could take 100 stock gearboxes from the same factory and they would all have different alloy compositions. They just throw scrap metals in a pot and melt it. Mostly Zinc and other low melting point metals. It is literally the dog food of metal. It is sad that is what they use for such a high stress part. I've never had a billet shell crack, I've seen 100s of stock shells crack. They even make the receivers out of pot metal. Seen many broken receivers as well. I like Negative Airsoft, but he is just stubborn sometimes, and other times he is just wrong. His channel is for entertainment, not information. Just because you like someone does not mean you need to listen to everything they say. That is how "Flat Earth Theory" started. To say billet gearboxes are "shit" is just silly. Maybe the billet gearbox he had was shit. If I remember, he had a billet split gearbox shell from Aliexpress. No wonder he thought it was shit. Companies pay pennies for the shells they make, billet would cost them dollars. Dollars customers would be willing to spend extra for a product that wont crack, ever. Give me a good reason that they are shit.
Why not just copy systema’s infinity gearbox? They went out of business anyway 😭
Why do you guys have a need to "invent" something just for the sake of it? There's absolutely zero advantage of using that hopup chamber design. Zero...
Also a cheap membrane remote for a mosfet? Same one chinese LED strips come with? Really?
you do realize that if the airsoft manufacturers didnt try to inovate and come up with new things, we would only have boring crappy m4s right?
@@legogaming6585 This is a boring m4 LOL. What makes you think this wont be just as crap as everything else they make?
@@pauls.5815 i feel like youve had a bad experience with G&G. The ETUs are a little hit or miss yes, but the internals on this "boring m4" aernt exactly boring. I look forward to the SGR556 releasing. G&G has always been in the aspect of gearbox innovation, not necessarily replica body innovation. The G2/G2H was a solid gearbox, and the G3 should be the same. If you dont like what G&G does, dont buy it. There, fixed your issue 🤷♂️
@@legogaming6585 the G2 had gears scratching the gearboxes and horrid MOSFETs, this will be the exact same unreliable shit
WOW!
Too much going on.
Too much electronics, the same function could have been done mechanically...and certainly in a more reliable way.
Think they should learn how to make airsoft guns more cheaper while keeping the same quality to make it more accessible to those that want to join the hobby, rather than make this
日本に早く来ないかなー