Thanks a million man, I had the same saw, Let it sit and the Carb seems to have gummed up. I was going to ttear it appart and clean it but I took you "Yamazon" advice. Turns out Carbs are super cheap :P
Yessir, I'm glad it worked out. Saving a few bucks always feels nice as well! If you haven't already please consider subscribing and Liking the video. It really helps the channel grow. Thanks again
Great work, Bill 👍🏼. I’ve just bought a 3845 a couple of days ago and it seems to work great for it’s size. I’ve started running it in on Australian hardwood and it survived lol. Great video, mate and thank you. Liked and subscribed 👍🏼
Hi Bill. I just wondered if you could help me with a question? I noticed my Ryobi 3845 when using it the bar nuts and bar get very, very Hot….. I noticed the bar studs are adjacent to the muffler! They are only separated by a small gap of about 1/2” or 10 to 12mm. I’m not sure that it was doing it when I first received it, but it gets red hot. I’ve actually just made a heat shield for it, so hopefully it works? I just wondered if you had seen this yourself? Thanks in advance.
@HowIDoItFaM Bill, they are so hot that you can't touch them at all (bar nuts) after cutting wood for a little while. I think it could be the radiant heat from the muffler? But, they just seem to be too hot for the mufflers heat? Any ideas would be greatly appreciated 🙏.
Thanks for watching. Sorry about that (not showing the screw lengths) Here is the adjustment tool for this chainsaw. It's the pacman type Savior Pac Man Style Carb Carburetor Adjustment Tool 308535003 Screwdriver for 2 Cycle Homelite Ryobi Poulan Blower Trimmer Carburetor Adjusting Tool a.co/d/6n2nnj2
Thanks for watching glad to help. If you haven't already I would appreciate it if you hit that subscribe button. I have alot of fixes and more on the way. Thanks!
Thanks. I got you MOTOKU 309376002 Carburetor Carb kit for Ryobi RY3714 RY3716 Gas Chainsaw a.co/d/7fUKIdA If you haven't already please consider subscribing and Liking the video. It really helps the channel grow. Appreciate ya!
Thank you for watching! Glad to help. If you haven't already please consider subscribing and Liking the video. It really helps the channel grow. Thanks again
Thanks a million man, I had the same saw, Let it sit and the Carb seems to have gummed up. I was going to ttear it appart and clean it but I took you "Yamazon" advice. Turns out Carbs are super cheap :P
Yessir, I'm glad it worked out. Saving a few bucks always feels nice as well!
If you haven't already please consider subscribing and Liking the video. It really helps the channel grow. Thanks again
Great work, Bill 👍🏼. I’ve just bought a 3845 a couple of days ago and it seems to work great for it’s size. I’ve started running it in on Australian hardwood and it survived lol.
Great video, mate and thank you.
Liked and subscribed 👍🏼
Thanks for watching! I'm glad you liked the video
AUSTRALIAN HARDWOOD?!... I heard that stuff is solid almost like concrete. And it survived?!
@@HowIDoItFaM she’s pretty hard stuff to cut, Bill. The little Ryobi seemed to cope with it alright though Hahahahahahaha. Great video, mate, cheers…
Hi Bill. I just wondered if you could help me with a question? I noticed my Ryobi 3845 when using it the bar nuts and bar get very, very Hot….. I noticed the bar studs are adjacent to the muffler! They are only separated by a small gap of about 1/2” or 10 to 12mm. I’m not sure that it was doing it when I first received it, but it gets red hot. I’ve actually just made a heat shield for it, so hopefully it works?
I just wondered if you had seen this yourself? Thanks in advance.
@wayneberry8703 no problem I'll definitely help if I can?
literally red hot? Glowing red?
@HowIDoItFaM Bill, they are so hot that you can't touch them at all (bar nuts) after cutting wood for a little while. I think it could be the radiant heat from the muffler? But, they just seem to be too hot for the mufflers heat? Any ideas would be greatly appreciated 🙏.
Wish you had shown the different length screws and where they went. Please also the exact carb adjusting tools. So many are the wrong ones.
Thanks for watching. Sorry about that (not showing the screw lengths)
Here is the adjustment tool for this chainsaw. It's the pacman type
Savior Pac Man Style Carb Carburetor Adjustment Tool 308535003 Screwdriver for 2 Cycle Homelite Ryobi Poulan Blower Trimmer Carburetor Adjusting Tool a.co/d/6n2nnj2
Super helpful!! Thank you!!
Thanks for watching glad to help.
If you haven't already I would appreciate it if you hit that subscribe button. I have alot of fixes and more on the way. Thanks!
exactly what i needed, thank you!
Thanks for watching. Glad to be a help
If you don't mind I would love to have you subscribe to my channel. It really helps the channel grow. Thanks!
nice!
where did you get the carburetor? have a link? thanks
Thanks. I got you
MOTOKU 309376002 Carburetor Carb kit for Ryobi RY3714 RY3716 Gas Chainsaw a.co/d/7fUKIdA
If you haven't already please consider subscribing and Liking the video. It really helps the channel grow. Appreciate ya!
What was the carb kit from yamazon
MOTOKU 309376002 Carburetor Carb kit for Ryobi RY3714 RY3716 Gas Chainsaw a.co/d/3tPntXe
Thank you for watching!
7:35 thanks
Thanks for watching. Glad to help
Great vidieo thanks
Thanks for watching!
outstsnding explaination thankyou 😊
Thank you for watching! Glad to help.
If you haven't already please consider subscribing and Liking the video. It really helps the channel grow. Thanks again
Very helpful, and entertaining :)
My wife would kill me that’s a great a great video
Thank you... I woke up from the Coma 2 days later 😂