Having trouble getting this to work, keep getting this message : "No data received, is the radio connected and in flash mode? Please try again."... any suggestions, all connected up afaik... thanks
LISTEN FOLKS, if this is not working for you... If your are getting the "no data received, is the radio connected and in flash mode? please try again." message YOU NEED TO PUSH THE CABLE IN MUCH HARDER. MUCH HARDER! PUSH UNTIL YOU HEAR A BONE CRUNCHING CLICK! You know it is working when your top LED starts flashing.
If you have like a message on the browser box "no data received, is the radio connected and in flash mode? please try again." You should push the pin to the radio side. Problem will be solved. Thanks for the great video.
Mine wont flash😫I'm getting the following message, the device is in flash mode.... Flash command rejected. Aborting. No data received, is the radio connected and in flash mode? Please try again.
(Google translation). Hi, so many firmware extend the frequency range to 18 -1300 MHz. Is there also programming software that can store frequencies below 50 MHz or above 600 MHz in the device? The latest version of CHIRP (December 9, 2023) also issues an error message when such an attempt is made.
Hi, hope you can help me. I bought a Quansheng UV K5 from Ali Express. Device works good, but in the Frequency Range from 350-399.975Mhz it is not possible to send. When i push the Send Button in this range, the Display shows "TX-Disable". I thought a firmware update on egzumer would solve the problem, but I still can't transmit in this frequency band. What could I do to fix this?
Hello everyone, after updating to the latest version I can't TX on F3 in VFO, while in MR it works great. Any tips? I would be very grateful. Greetings to all
Just found this amazing item on AliExpress. Check it out! ￡12.48 62%OFF | Quansheng UV 5R Plus Walkie Talkie Portable Am Fm Two Way Radio Commutator VHF Station K5 Receiver Ham Wireless Set Long Range a.aliexpress.com/_mPdp1ZO
@@HamTechRadioScannerDrones I have. There is not much to it. I have even watched the other peoples instructions. It recognises it in Device manager on the COM3. I click to Flash firmware. The box come up with COM3-Paired. I select it and click on Connect and it comes with "No data received, is the radio connected and in flash mode? Please try again." (And, it is in the Flash mode as the flashlight is on.)
Does the UV-5R run the same stock firmware as UV-K5/K6? Just asking in case I don't like EGZUMER and want to go back to stock firmware, can I just flash it with the stock K5 firmware? I haven't been able to find stock UV-5R firmware for download anywhere.
@@HamTechRadioScannerDrones I can deadlift 500lbs so my push is a little stronger than most, it is definitely all the way in (she said in horror :) sometimes it gets to 50%, sometimes 30%, most I've had is 80%. I think it may be the cable, I've ordered a different one, hopefully this cures it.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
v0.22 is out 👀😎 thank you so much straight to the point simple clear step by step instructions.73
Thanks I will try it out .
u have a link pls
@@GraSuDCAgit hub
Thank you for your very interesting videos! 73 from Athens, Greece
Glad you like them! Love Greece
Thanks so much. So easy to change the UVK5(99) V.22 is so much better than the mod that came with it.
Yes
Having trouble getting this to work, keep getting this message : "No data received, is the radio connected and in flash mode? Please try again."... any suggestions, all connected up afaik... thanks
Push cable harder
I hadn't pushed it in enough 🤣🤣@@HamTechRadioScannerDrones
@@HamTechRadioScannerDrones Right, had the same problem. tip did make it work.
LISTEN FOLKS, if this is not working for you...
If your are getting the "no data received, is the radio connected and in flash mode? please try again." message
YOU NEED TO PUSH THE CABLE IN MUCH HARDER. MUCH HARDER!
PUSH UNTIL YOU HEAR A BONE CRUNCHING CLICK!
You know it is working when your top LED starts flashing.
Thanks
Thank you !!! Had this error and didn't know what to do
you are amazing.
If you have like a message on the browser box "no data received, is the radio connected and in flash mode? please try again." You should push the pin to the radio side. Problem will be solved.
Thanks for the great video.
Thanks loads
What pin? What do you mean?
For me it didnt fix it. Came up with:
Flash command rejected. Aborting.
No data received, is the radio connected and in flash mode? Please try again.
thank you for sharing your experience
My pleasure!
@@HamTechRadioScannerDrones So this is fine to do on K6, cuz on the page it says for K5?
I have been hunting for my baofeng cables since the black friday sales. Still not flashed mine yet, lol.
£3.85 amazon
@@HamTechRadioScannerDrones I know, lol. I just dont want to get another one when I know I have a few kicking around already...
Mine wont flash😫I'm getting the following message, the device is in flash mode....
Flash command rejected. Aborting. No data received, is the radio connected and in flash mode? Please try again.
Keep tinkering you will get there watch lots Videos .
@@HamTechRadioScannerDrones Given up and bunged it in the loft, 2 weeks of my life wasted already....at least only £20 wasted. thx anyways
theres a new update up now
Yes seen
Keep getting the failed to connect to serial port after clicking the flash firmware button.. using the baofeng usb cable...any suggestions
Push the two pin connector harder in to tha Radio .
@@HamTechRadioScannerDrones I did that still not connecting?
(Google translation).
Hi, so many firmware extend the frequency range to 18 -1300 MHz. Is there also programming software that can store frequencies below 50 MHz or above 600 MHz in the device? The latest version of CHIRP (December 9, 2023) also issues an error message when such an attempt is made.
Wait for new chirp updates or use Original Programing software.
Danke für das Video.
Cheers
Hi, hope you can help me. I bought a Quansheng UV K5 from Ali Express. Device works good, but in the Frequency Range from 350-399.975Mhz it is not possible to send. When i push the Send Button in this range, the Display shows "TX-Disable".
I thought a firmware update on egzumer would solve the problem, but I still can't transmit in this frequency band. What could I do to fix this?
Go in to secret menu
@@HamTechRadioScannerDrones How can i do this in egzumer Firmware?
My 'M' select when selecting the ctcss is now working since flashing v20. Happy days. Also, where can i find a list of the egzumer menu settings?
github.com/egzumer/uv-k5-firmware-custom/releases
I failed to install this new firmware, I am getting "No data received, check if device is in flash mode, or cable attached"
Try different cable
@@HamTechRadioScannerDrones Solved, I did not realize I have to press in cable very hard, it just poped in for a few mm more
Tried this but when i hit "connect" it says firmware unable to load check radio is in flash mode. Which it is !! Any ideas please.
Try push cable in harder .
@@HamTechRadioScannerDrones Brilliant, thankyou. It was a second click and hard to push. Upload done. 👍
Great video! Thank you for your contributions to our Community!
Our pleasure!
Hello everyone, after updating to the latest version I can't TX on F3 in VFO, while in MR it works great. Any tips? I would be very grateful. Greetings to all
Keep tinkering
@@HamTechRadioScannerDrones In the hidden menu I selected option no. 69 (Reset VFO) and now it works the same as before :-) 73
Great videos thank you, what is blue screen uv5r?
Just found this amazing item on AliExpress. Check it out! ￡12.48 62%OFF | Quansheng UV 5R Plus Walkie Talkie Portable Am Fm Two Way Radio Commutator VHF Station K5 Receiver Ham Wireless Set Long Range
a.aliexpress.com/_mPdp1ZO
Mine recognises the port but just won't upload it. :(
Follow instructions step.by step and slowly .
@@HamTechRadioScannerDrones I have. There is not much to it. I have even watched the other peoples instructions.
It recognises it in Device manager on the COM3. I click to Flash firmware. The box come up with COM3-Paired. I select it and click on Connect and it comes with "No data received, is the radio connected and in flash mode? Please try again." (And, it is in the Flash mode as the flashlight is on.)
Does the UV-5R run the same stock firmware as UV-K5/K6? Just asking in case I don't like EGZUMER and want to go back to stock firmware, can I just flash it with the stock K5 firmware? I haven't been able to find stock UV-5R firmware for download anywhere.
Yes look for Quansheng Downloads
ruclips.net/video/V3siQuL59tE/видео.htmlsi=knifcyEoP8epXRbQ
@@HamTechRadioScannerDronesThanks. So I can use the UV-K5 firmware on a UV-5R?
Great videos, great radio, thank you for the advise and helpful hints
Cheers 73
Mine gets to 13% and then stops, now it does not turn on :/
Push cable in harder u can't brick these Radios reload .
@@HamTechRadioScannerDrones I can deadlift 500lbs so my push is a little stronger than most, it is definitely all the way in (she said in horror :) sometimes it gets to 50%, sometimes 30%, most I've had is 80%. I think it may be the cable, I've ordered a different one, hopefully this cures it.
maybe its a lemon units😂😂
Did it last night ive not had a chance to play with the radio yet.
Look at each button text , hold down buttons, also put F then 5.
awesome video mate!!
Thanks for the visit
Many thanks for showing well explained done on my K6.
Glad it helped
Wow that was too Easy!!! 73
Nice
Excellent!! Thank you!!!!!!!!!!!!!!!!!!!
You are welcome!