Removing And Cleaning Mercedes Benz Mono Wiper Half Moon Gear (W202, W210, W124)
HTML-код
- Опубликовано: 29 авг 2020
- This video is about Mercedes Benz mono wipers. This specific video will be on how to remove the wiper and clean the half moon gear. Wiper is from w202 but the same system is for other mercedes benz mono wipers. If you have any questions about this video or topic feel free to leave a comment.
Latest news are announced on our instagram page - / garagify
Instrumental produced by Chuki. Check out his channel: / chukimusic 
Авто/Мото
You should load the inner mechanism with synthetic grease like you would with a bearing.
Спасибо тебе большое за видео!
Good job.sir
Hi, I pulled my wiper apart with out marking it and I'm not coming right with the timing. Any tips
Hey, check out how the handles are facing in the video, the big main one from the motor should face straight forward. If its a little off the windshield just remove it and adjust a little. Good luck!
Hi,
I just had a problem, motor was ok but no wiper move, ball joint on the linkage was broken.
Bought a new linkage, installed.
And *almost* good, it touches slightly the leaf protector plastic panel on the driver side, so it goes a bit too “down”.
On the passager side on the contrary, it does NOT go down enough.
Just as in your video at @3:42
So the whole unit should be rotated a bit to the passanger side, which is impossible of course.
If I try to adjust at the motor connection (@3:51) (unscrew, turn, screw), it looks like I just change the parking position, but not the way it travels.
Is there any way to fix it?
I can see you fixed it, but how?
I should unscrew the other bolt (@3:45) and rotate that one?
I have not touced anything else...
Thanks
Hi, sounds like your wiper is out of alignment. There should be small dots which needs to be aligned to park it right spot. If you need more help, you can contact us on instagram page and send more photos. We will be more than happy to help.
I have the same problem with a w124. How did you fix it in place so it runs as it should and not bounce more one way.
awesome! working on your MB with your mate in bare feet on a beautiful day. what could be better
Your wiper doesn't work properly, while its cleaning the uncleaned part on the bottom center should be like an "'M'', your's just drawing a half circle.
Yes, probably the axle is broken inside the top part that is not visible but anyway the video is still showing the idea of the wiper.
@@garagify4255 yea, no questions to the process itself.