Thank you my friend! We will see what’s next on the project list, but first I have a few more things I would like to do to this one. And I can’t wait to ride it! 🤘
Well ... its definitely a bright colour lol... the overall look is good personally I'd have slightly shorter bars as I'm used to riding hands in front and have shoulder issues so arms up high for too long begins to hurt . The sissy bar blends in well with the seat unit. Its not a large amount of modifications but its just about right before it gets into the serious realms of lot of money being spent . You have done well can't wait for the start up and possibly a road test 😊
Thank you very much! 🤘 I might have gone too extreme with the bars, we will see how long I can stand them. 😅 I don’t think I’ll ever spend any serious money on this one, but we will see. A road test is coming up! ✌️
My goodness,I have savage on chain drive and it’s 400cc ,1996 y.o.,and it’s little oil leak at cylinder after 4 years driving,only summer ,I already have cylinder gasket and once I disassembled by myself this motor ,watch your video and it’s make me cry ,because I want to ride ,but it’s make me pissed off about oil leaking ,need to take fists strong and do change the gasket ! It’s a pleasure to watch your work thank you
Gotta say good job man , ya it may not be the prettiest lawn mower chopper but you did it all your self on a small budget so congradulations on your build 👍👍 i may bust your balls but i always say to people , if you haven't built a bike your not a biker , you have passed the test my friend lol ,,,piece .....
Haha, thank you! Feels good to pass the test. 😅 ✌️ Building the prettiest bike was never a realistic goal, the goal was to just build a bike. Cheers for taking your time watching and leaving comments! 🍻
Luv the AIR filter and the hose vent filter.. always hated the air box on mine! also need video on paint= mine washed off ..first gas spill when i filled it :>(... dam rustolium!
Thanks! I think the stock air box is a bit too bulky. These gives a cleaner look. In my experience, a 2K paint is the way to go to avoid it getting stripped by gas.
But I have tons of extra bolts! 😅 Just kidding. I didn’t want to lock anything in before knowing everything would go back together. I did have to take the rear wheel off like three times after all. 🫣 I have the factory list of all the places that needs further locking, so I will go over them all again.
Thank you very much! Awesome! What are you doing to it? Haven't done any work on the carb yet, but will have to rejet it, it runs, but not as great as it could.
@@HeavyMetalParkingSpot Yeah, might be too much air in the mixtrue now, I might also rejet mine, or maybe reduce the air intake. Iam just going for a bobber-ish look, single seat (would be cool to make my own like you), short back fender etcetc. Right now i am just deep cleaning everything.
Yeah, not sure it needs as much air as it gets now, but those small filters gives a clean look. I think you should try making a seat, not too hard but very rewarding. Ah, shit, that broken exhaust bolt is what you fear the most when you pull apart an old motorcycle. I hope you get it sorted!
Be careful the inside if the filter doesn5t cover the little air holes on the intake! Did that on mine, put a pipe inbetween to remedy it. LOve the build good luck with it.@@HeavyMetalParkingSpot
Vi ses på vägen! 🇸🇪 On se voit dans la rue! 🇨🇵 Nos vemus en la carretera! 🇪🇦 See you on the road! 🇬🇧 Ci vediamo in viaggio! 🇮🇪 Wir sehen uns auf der Straße! 🇩🇪 Congratulation! After 7 month, solely with your hands work & High Octane Heavy Metal music in your skull, you have brought the "channel mascot" on the road! That's awesome my friend! 👍🏻 Thanks for the ride and for so much inspiration to do things yourself! "The universe is yours to make" (motto of the woodworking channel "Get Hands Dirty") I would be interested in how the motor goes with the "open airways".... ➡️ paralyzed like a yellow submarine in the silt, ➡️ razor-sharp & smooth like Urma Thurman in Tarantinos "Kill Bill" and what kind of filter is that you have attached to the starter motor? Crankcase ventiation? Enjoy the 💥 S💨 A 💨 V 💨 A 💨 G 💨 E 💥 Chopperriding! 😎🤘🏻☮️ Cheers my friend! 🍻
Cheers my friend! And thank you for the ongoing support! Your encouraging are definitely a part of the reason I managed to get this done! I have more projects planed so I hope I can continue to inspire you. I still have to work on the carb, it's getting too much air right now. 💨 But I will fix that! The filter is, as you said, for the crankcase ventilation. Funny that you mentioned "Get Hands Dirty", I have followed her for a long time and am always amazed by the quality of work she manages to produce. A really skilled maker! Take care and I will see you on the road! 🔥✌️🤘🍻
Oh, I'm very happy to hear that! I'm of course very excited about your next projects. Just keep doing what and how skilled you're making it. But please: don't get stressed by your followers....😎😉😁☮️
Hey! I just read your channel description and this line caught my eye: "Again be respectful to one another in the comments and let's just help each other but have fun while doing it." Why not practice what you preach? Have a nice day! ✌️
It turned out like a really cool new school chopper, not something totally impractical, but cool looking and with a lot of character.
Thank you very much! I think you summed it up very nicely. ✌️
So nice to see it together! it did turn out fkn awesome🤘😎
Thank you for sticking around and for your nice words! 🤘
Nice, 1st iteration done 😍 The Savage looks great. Can't wait dor the next projects and I really want to hear it!
Thank you my friend! We will see what’s next on the project list, but first I have a few more things I would like to do to this one.
And I can’t wait to ride it! 🤘
The yellow came out sick on your ride man! Glad to see how far you’ve gotten! I’m planning on doing some paint to my Suzuki s40 soon
Thank you so much! 🤘
What color will you be going for?
Well ... its definitely a bright colour lol... the overall look is good personally I'd have slightly shorter bars as I'm used to riding hands in front and have shoulder issues so arms up high for too long begins to hurt . The sissy bar blends in well with the seat unit. Its not a large amount of modifications but its just about right before it gets into the serious realms of lot of money being spent . You have done well can't wait for the start up and possibly a road test 😊
Thank you very much! 🤘
I might have gone too extreme with the bars, we will see how long I can stand them. 😅
I don’t think I’ll ever spend any serious money on this one, but we will see.
A road test is coming up! ✌️
My goodness,I have savage on chain drive and it’s 400cc ,1996 y.o.,and it’s little oil leak at cylinder after 4 years driving,only summer ,I already have cylinder gasket and once I disassembled by myself this motor ,watch your video and it’s make me cry ,because I want to ride ,but it’s make me pissed off about oil leaking ,need to take fists strong and do change the gasket ! It’s a pleasure to watch your work thank you
Yeah, oil leak at the cylinder seems to be common on these engines. Hope you can get it fix and get back to riding! Thanks for your comment!
looks good!
Thank you! ✌️🤘
I loved it very good 👍👍💯
Thank you! That makes me really happy! ✌️🤘
Hello из России! Самое лучшее то, что сделано своими руками!👍 Мот классный !!!! 👍🤝
Hey! 👋 Thank you very much! 🤝
Gotta say good job man , ya it may not be the prettiest lawn mower chopper but you did it all your self on a small budget so congradulations on your build 👍👍 i may bust your balls but i always say to people , if you haven't built a bike your not a biker , you have passed the test my friend lol ,,,piece .....
Haha, thank you! Feels good to pass the test. 😅 ✌️
Building the prettiest bike was never a realistic goal, the goal was to just build a bike.
Cheers for taking your time watching and leaving comments! 🍻
that is so dope. where did u get the parts?
Thank you very much! 🙏
I got parts from all over the place, and some of them I made myself. Any specific parts you were wondering about?
Luv the AIR filter and the hose vent filter.. always hated the air box on mine! also need video on paint= mine washed off ..first gas spill when i filled it :>(... dam rustolium!
Thanks! I think the stock air box is a bit too bulky. These gives a cleaner look.
In my experience, a 2K paint is the way to go to avoid it getting stripped by gas.
Cade o vídeo pilotando a moto 😢
I'm sorry, I'm note sure what to make of the crying emoji. I hope you are ok?
Looks great, does it run?
Thank you very much! It does actually run, haha. There will be a ride video soon! 🤘
@@HeavyMetalParkingSpot🤩😎🤘🏻
Uh oh, you forgot the Lock Tight!
But I have tons of extra bolts! 😅 Just kidding. I didn’t want to lock anything in before knowing everything would go back together. I did have to take the rear wheel off like three times after all. 🫣 I have the factory list of all the places that needs further locking, so I will go over them all again.
@@HeavyMetalParkingSpot😂😂🤣🙏🏻🍻
Looks very cool! Such an awsome bike! I'am currently working on one from 95 aswell :D Did you do any tuning on the carb for that Air POD filter?
Thank you very much!
Awesome! What are you doing to it?
Haven't done any work on the carb yet, but will have to rejet it, it runs, but not as great as it could.
@@HeavyMetalParkingSpot Yeah, might be too much air in the mixtrue now, I might also rejet mine, or maybe reduce the air intake. Iam just going for a bobber-ish look, single seat (would be cool to make my own like you), short back fender etcetc. Right now i am just deep cleaning everything.
And.... learning how to weld, got the exhaust bolt broken off in the cylinder haha..
Yeah, not sure it needs as much air as it gets now, but those small filters gives a clean look.
I think you should try making a seat, not too hard but very rewarding.
Ah, shit, that broken exhaust bolt is what you fear the most when you pull apart an old motorcycle. I hope you get it sorted!
Be careful the inside if the filter doesn5t cover the little air holes on the intake! Did that on mine, put a pipe inbetween to remedy it. LOve the build good luck with it.@@HeavyMetalParkingSpot
Bad ass bro
Thank you so much! 🤘
NEEEXT LEVEEEEEL
Thank you! ✌️🤘
why did you not start it up?!! thats rule number 1
Yeah man what gives? He hiding something.😊
Wanted to save something good for those who wait. 😉
@@HeavyMetalParkingSpot you did have that devilish look on your face; you knew what time it was...time to fire it up!!
He can't get it to run
Nice😁
Thank you so much! 🤘
Bro you didn't even start it! I need to hear the exhaust!!!😀
Haha, sorry! It might be a small consolation, but I have two other videos where I actually start (and ride) the bike. 😅
I'd ride it , but since I'm older and wider in the seat area, I'd need a wider seat
Yeah, the seat is not really built for comfort. But it's actually not that uncomfortable still.
Thanks for your comment! ✌️
Vi ses på vägen! 🇸🇪
On se voit dans la rue! 🇨🇵
Nos vemus en la carretera! 🇪🇦
See you on the road! 🇬🇧
Ci vediamo in viaggio! 🇮🇪
Wir sehen uns auf der Straße! 🇩🇪
Congratulation! After 7 month, solely with your hands work & High Octane Heavy Metal music in your skull, you have brought the "channel mascot" on the road! That's awesome my friend! 👍🏻
Thanks for the ride and for so much inspiration to do things yourself!
"The universe is yours to make"
(motto of the woodworking channel "Get Hands Dirty")
I would be interested in how the motor goes with the "open airways"....
➡️ paralyzed like a yellow submarine in the silt,
➡️ razor-sharp & smooth like Urma Thurman in Tarantinos "Kill Bill"
and what kind of filter is that you have attached to the starter motor? Crankcase ventiation?
Enjoy the
💥 S💨 A 💨 V 💨 A 💨 G 💨 E 💥 Chopperriding! 😎🤘🏻☮️
Cheers my friend! 🍻
Cheers my friend! And thank you for the ongoing support! Your encouraging are definitely a part of the reason I managed to get this done!
I have more projects planed so I hope I can continue to inspire you.
I still have to work on the carb, it's getting too much air right now. 💨 But I will fix that!
The filter is, as you said, for the crankcase ventilation.
Funny that you mentioned "Get Hands Dirty", I have followed her for a long time and am always amazed by the quality of work she manages to produce. A really skilled maker!
Take care and I will see you on the road! 🔥✌️🤘🍻
Oh, I'm very happy to hear that!
I'm of course very excited about your next projects. Just keep doing what and how skilled you're making it.
But please: don't get stressed by your followers....😎😉😁☮️
No worries, but thanks for the concern! 😎🍻🤘
@@HeavyMetalParkingSpotWell then: "Get Hands Dirty!" .... a carburetor would be cinematic tune... 😊
@@michaelelse9328 Haha, we'll see if I can come up with something creative regarding the carb tuning. 😅
Comment+Like
🙏
Uhhhhh this ain’t it
Hey! I just read your channel description and this line caught my eye:
"Again be respectful to one another in the comments and let's just help each other but have fun while doing it."
Why not practice what you preach?
Have a nice day! ✌️