Part 1

Поделиться
HTML-код
  • Опубликовано: 13 окт 2024
  • #conversionkit #gasgenerator #generator #lpggenerator #installpgkit #lpgcarburator
    This is quick video which shows how to install the triple fuel carburator conversation kit. This conversation kit can run your generator in LPG mode, CNG mode and lastly gasoline (petrol).
    To run it with LPG (cooking gas), securely connect the kit to the gas cylinder using the standard pressure hose. Ensure that the end clips are well fastened so as to avoid leakages.
    check the LPG mark on the kit and turn the control nub to align, thereafter you can turn on the regulator and then start the Gen after pushing the purge or pressure release valve to prime the carburator.
    Same process applies for CNG except that the CNG cylinder operates at a much more higher cylinder pressure. NB, the regulator and hose for CNG must be as prescribed in the safety standard. Do not assume that LPG cylinder, regulator and hose can be used for CNG. Please go for the standard CNG kits.
    To run your generator using the gasoline (petrol) option, simply just plug in the petrol hose from the gen tank, secure it with the spring clip and then start the generator. Kindly note that the LPG/ CNG regulator must be shut off (closed) before running on petrol.

Комментарии • 15

  • @paruhblgen4222
    @paruhblgen4222 Год назад

    For quick start. before you connect propane pipe to the carburetor. open valve for gas to reach tip of the pipe, then connect. Otherwise you to pull starter 5-6 times

  • @ericimade7153
    @ericimade7153 8 месяцев назад

    I just converted generator to gas but my generator sound is too high even when I reduce the sound of the generator still too high

  • @solafrance2
    @solafrance2 Год назад

    You didn't show how you increased the gas flow to stop the unstable sound

    • @techpointzone4408
      @techpointzone4408  Год назад

      Hello @solafrance2, the gas flow was increased from the regulator on the gas cylinder.
      The type of regulator you are using will determine how much of alterations you can do on the flow of gas.
      kindly SUBSCRIBE to this channel and also share this content with friends and family so that we can be encouraged to do more helpful videos.
      Don't forget to give it a like and also hit the bell icon for notifications on our future videos.

  • @krossjunior5970
    @krossjunior5970 Год назад

    How do you adjust the hybrid for lesser consumption brother

    • @techpointzone4408
      @techpointzone4408  Год назад

      Hello krossjunior, Adjustments can be done from your gas regulator and also from the screw around the fuel switching control.
      Kindly SUBSCRIBE to this channel and also share with friends and family so that we can be encouraged to make more helpful videos.

  • @princeemmanuel4599
    @princeemmanuel4599 Год назад

    Why was it sounding like there is no fuel on it how did you fix it

    • @techpointzone4408
      @techpointzone4408  Год назад

      hello, That sound was as a result of the unstable rpm which was initially caused by the low flow of lpg into the carburator.
      kindly SUBSCRIBE, like, share and hit the bell icon for notification.

  • @AyorindeOluremi-vx1cr
    @AyorindeOluremi-vx1cr Год назад

    How much is the carburator

    • @techpointzone4408
      @techpointzone4408  Год назад

      Hello Ayorinde, i am not into the sale of the carburetor. For now i am more into DIY, issues being faced and how to assist people resolve or work around such issues.
      Kindly subscribe to this channel so that we can do more.

  • @evawilliam3826
    @evawilliam3826 Год назад

    What's purpose of the red button on the log and what can cause to be switching off itself without gas finish?

    • @techpointzone4408
      @techpointzone4408  Год назад

      hello Evawilliam3826, kindly SUBSCRIBE to this channel.
      The purpose of the red control is to enable you to be able to switch between CNG and LPG(cooking gas). here is a video that explains further about your question: ruclips.net/video/KmIUe6D6QhQ/видео.html
      The generator can be switching off itself for the following reasons:
      (1) Your generator migth be low on oil and the oil switch is kicking in so as to prevent your generator from knocking.
      (2) Your generator can be switching off if the conversion kit wasn't properly installed especially if the gasket one or two of the gaskets is broken or missing...
      (3) Your generator can be switching off if the air cleaner of your generator (foam) is heavily dirty and hindering air absorption.
      (4) Your generator could be switching off if the choke position is wrong.
      kindly SUBSCRIBE to this channel, like and share this video and also this one: ruclips.net/video/KmIUe6D6QhQ/видео.html with all your contacts.

  • @igwetruman7191
    @igwetruman7191 Год назад

    My gas cylinder is sweating when I use for up to an hour

    • @techpointzone4408
      @techpointzone4408  Год назад +1

      It is a normal occurence for your gas cylinder to sweat when in use. However, you have to be sure that there is no leakage so that your LPG can last longer in running the gen.
      kindly subscribe to this channel so that we can do more videos.