I recommend taping around the original one first before you remove it and marking with a sharpie where the key points are. It allows you to put the new ones back on in the exact same spot by using the tape border.
Should have done tape around the old badges before you took them off or at least a nice straight nice above or under. That way you knew they would be the same on both sides. Either way new ones look so much better!
I moved the 10 inch subs into a speaker box for much improved bass. Only cost 150 bucks. used the original subs. Didn't cut anything so it can go back if needed.
Sweet Cat RP Pro. I did the LED,s from diode dynamics as well on my SRT Challenger, and really like them because they made a huge difference at night. Your mods are making the cool Cat look even better, keep em coming
Actually the spoiler and grille emblems that you got came on the 2017 and the fender emblems came on the 2018. The 2017s also got the same badging as the grille and Spoiler on the seats.
The "T" looks fine I think he just spaced it a little bit to far apart from the "R". It looks really good when it was packaged you can see it was perfectly spaced there.
Its just spaced way to far away from the "R" and the "R" is spaced to far from the "S". But it also looks different from the size of the original badges to be honest. I don't like where he placed any of the badges actually.
I went against my word and used the existing outline of the "T" as my placement for the new one. Big mistake. I agree it needs to be moved closer to the "R" a hair. Not looking forward to moving it lol.
RP Productions Bummer. I did mine and the vinyl fit but it definitely didn't cover the whole letter it left I slight sliver of original letter around the edges but I like that effect because it makes the vinyl actually appear to be almost like a colored chrome?
Who in their right mind would apply new badges without measuring and marking off each side to ensure as close to 100% accurate and uniform placement on both sides. Either your new badges aren’t uniform on each side or you’re some kind of savant who has a keen eye.
Really like the new ones. Personally would have moved the spoiler one towards the middle just a bit more but definitely think the color combo was good.
Riley I have a scat pack challenger with the black trunk stripe and black spoiler like yours. Did you do anything with the spoiler during your paint correction or any time you clean it do you treat that type surface any other way?
Riley, I noticed on one of your old videos you put Oracle side markers on your Charger. What was your experience with them and do you have any plans to put them on the Challenger? I want to replace the side markers on my Charger Hellcat but have seen on the Hellcat forums a lot of people where having issues with the Oracles failing. I would really love to replace them with lights from Diode Dynamics but they are dragging their feet making them for the Hellcats.
Hey Riley, just saw on the news that there was a white HELLCAT involved in a high speed chase in Texas. They said the car was stolen, hope yours is safe bud!
The “T” on the spoiler looks too far away
Yeah it looks kinda small
I really like the new fender badges. I'll probably switch to those soon. Make sure that you hellcat doesn't get stolen...
Albert S. Wazzup
Wat up family cruzin can’t wait to see you woop on street speed 717 lol 😂
FamilyCruisin ruclips.net/video/pYDZbOutkpA/видео.html
His hellcat got stolen.
It does me too.
james squadd your mom is calling you to dinner. Go on now boy.
I recommend taping around the original one first before you remove it and marking with a sharpie where the key points are. It allows you to put the new ones back on in the exact same spot by using the tape border.
You should get LED SRT BADGES for the front , IDK if you can for the rear as well ,
Should have done tape around the old badges before you took them off or at least a nice straight nice above or under. That way you knew they would be the same on both sides. Either way new ones look so much better!
Anthony laizure right each side would bother me if not perfect hahah
I like those badges! They look great! However, the number 1 every Hellcat owner needs is..... bigger tires!
That would drive me nuts I would have to measure it out before I put the other one on
I moved the 10 inch subs into a speaker box for much improved bass. Only cost 150 bucks. used the original subs. Didn't cut anything so it can go back if needed.
Sweet Cat RP Pro. I did the LED,s from diode dynamics as well on my SRT Challenger, and really like them because they made a huge difference at night. Your mods are making the cool Cat look even better, keep em coming
Actually the spoiler and grille emblems that you got came on the 2017 and the fender emblems came on the 2018. The 2017s also got the same badging as the grille and Spoiler on the seats.
That hellcat sounds so freaking good.
So sexy
Looking good.. I'm getting my HC wrapped white. I love the touches of black..
On the back the T is too far away from the R
The white and black is so clean looking , nice ride
How come you did this after the paint correction and not before?
Definitely want a hellcat in the future, so I will add these mods 👏
Nice to see a white Hellcat. I have a knuckle white 2018 myself and while white wasnt my first at the time, now I dont wany any other color.
8:53 I used to install the dodge Durango emblem and that center has a small piece of to hold it from the back that's why it broke
The best part of your videos are the cold starts.
Those should get you right below demon power
The "T" on the rear logo that goes on the spoiler looks too small and unproportional. Is that just me?
EpicGShot nope lol i was looking at that for quite a bit
The "T" looks fine I think he just spaced it a little bit to far apart from the "R". It looks really good when it was packaged you can see it was perfectly spaced there.
Its just spaced way to far away from the "R" and the "R" is spaced to far from the "S". But it also looks different from the size of the original badges to be honest. I don't like where he placed any of the badges actually.
GT_CoyoteS550 exactly !
I went against my word and used the existing outline of the "T" as my placement for the new one. Big mistake. I agree it needs to be moved closer to the "R" a hair. Not looking forward to moving it lol.
ABD for the win!
Way better ! Love how it pops on the trunk
What’s the exact color codes you chose for rear badge
“Absolutely fantastic”
Almost as fantastic as your grom ;)
The front badge would look cool with the white/gloss white overlay from Reflective Concepts.
I tried it but the vinyl was too small and didn't fit :\
RP Productions Bummer. I did mine and the vinyl fit but it definitely didn't cover the whole letter it left I slight sliver of original letter around the edges but I like that effect because it makes the vinyl actually appear to be almost like a colored chrome?
The T on the SRT is smaller. Its still an actual OEM badge as thats how it looks from the factory on the cars. Does look a little funny.
Are we not a loud to remove the resanator Exhauste system on those type of cars or no if is illegal
Depends state
Who in their right mind would apply new badges without measuring and marking off each side to ensure as close to 100% accurate and uniform placement on both sides. Either your new badges aren’t uniform on each side or you’re some kind of savant who has a keen eye.
yefferys50 yeah I woulda blue taped a square around the stock ones before I did it, I said the same shit bro
Really like the new ones. Personally would have moved the spoiler one towards the middle just a bit more but definitely think the color combo was good.
"What should he do to his mustang?" Not hit crowds
Spiderking-Airsoft uhhh literally dumbest suggestion. There's literally no other reason to get one.
lol bruh mustang are bad
Riley, Could you add a link for the trunk LED?
www.diodedynamics.com/store/catalog/product/view/id/22517/s/2015-dodge-challenger-trunk-light-led/category/516/#!prettyPhoto
Your hellcat looks and sounds better every video
Cool color choice on the rear one. I like it
Why would you not tape or mark off the spot so it matches and square. Rather then eyeball it
gunsmokezz right?? That really bothered me too.
I agree, but he addresses it later in the video. Each their own I guess
Can you change the interior red? I have no idea where to get that. I've wanted red in mine forever.
Looks 10x better man!
You just slapped it on by eye?? Isn't their a very specific placement required?
love your videos Riley! I cant wait to see you race the hellcat at the youtube callout in 2 weeks!
Nice video, wow 80k subs, wasn't that long ago you were showing how to shine up your big wheel.
Can you remove the "Dodge" on the rear the same way?
I think you should’ve did the front white too better than silver and black.
Have been wondering where the 1le badge video was. Looked for it months ago and never found it now i know why lol
Riley I have a scat pack challenger with the black trunk stripe and black spoiler like yours. Did you do anything with the spoiler during your paint correction or any time you clean it do you treat that type surface any other way?
Definitely like the outline
Nice.. sweet look for that retro kitty.. thanks for sharing
What percentage is your windows tint?
did you do this before or after your high speed chase with the Houston police?
Get the new 18’ hellcat wheels next! The refreshed look is so much better! Great vid
Those are for a widebody. Will look stupid on his car.
JazzedHellcat go check out the new chargers they have the new wheels on them. I think it’s actually 17’ is when they refreshed them
They are not 18 inch wheels. They are 20inch.
JazzedHellcat didn’t mention the size I mentioned the year bud.
Ok My mistake but they don't make a 17inch wheel from the factory for a Hellcat. The 18s don't look better IMHO.
Rear badge looks a little bit spaced out
I really like the new front and rear badges
The one on the spoiler should have been placed twords the left more away from the trunk gap.
Surprised you didn't get white in front and some white dodge letters for the trunk lid. Looks great though man. 👍🏻
i really like the new badging !!! wow!!
Nice product placement...REVLON!
Only mods is a straight pipe 4inch exhaust port polish big intake big cam and nitrous bottle
If I were to do this I’d be so nervous about t being lobsided it not parallel with the other side
Why not WHITE for the front grill badge as well??
Awesome. Doin it to my Hellcat now. Thanks for the tip!
Sick I’m going to put these on my sxt!!
Dont embarrass yourself
Looks good. Are you gonna put any stripes on it?
How much power did you gain to the wheels from the new badges?
Little things can make a big difference, car looks and sounds great =)
RP wit hellcat logo would have looked sweet on the spoiler.
Obviously some have a hellcat, but still entertaining to watch lol
Real car guys changing things that no one else will notice but them
Riley, I noticed on one of your old videos you put Oracle side markers on your Charger. What was your experience with them and do you have any plans to put them on the Challenger? I want to replace the side markers on my Charger Hellcat but have seen on the Hellcat forums a lot of people where having issues with the Oracles failing. I would really love to replace them with lights from Diode Dynamics but they are dragging their feet making them for the Hellcats.
I like all of badges except for the one on the back. It doesn’t look right and the T looks like it should be touching the R in SRT
What watch are you wearing?
I'll buy the old badges off of you!!! The closest thing I'll get to a hellcat
Today I saw a video on the local news of white hellcat stolen in texas, glad your car is fine, greets from europe
Upgrade the airbag to the one with red glowing srt back light
Hey Riley, just saw on the news that there was a white HELLCAT involved in a high speed chase in Texas. They said the car was stolen, hope yours is safe bud!
Looks great bro !! Love your hellcat !!
you going to keep the dodge lettering?
YES...they look odd when people remove them..
Can I have the old emblems
These mods blow
could I have your old fender badge?
Do a led conversion in your interior. You did to your scat pack but you didn't make a video. Please make a video.
Can we get a review on that hair dryer?
You should debadge the dodge on the back
The other upgrade I’ll be doing is put a wider tires on the rear so I can plant more power to the ground😁
Make the badge you took of the fender a keychain
I love it very good my boy Riley
Good informative video!! Thanks for the links!
buying a hellcat comes with new friend!
Just eyeballing wasn't good for me , I researched and layed out meticulous to OEM! But that's just me!
Looking good!
My hart started racing when I saw him take that cat off that car 😱 I’m on my way to the ER lol 😂
When is he putting a turbo kit on it
Damn you should bring this beast to the streetspeed717 call out
See I'm ocd, I always measure and masking tape haha. Looks great man! And for the love of god, please de-bug your front bumper, LOL
Quad tips Riley!!!
You should do a wrap
Ohh i thought this was bolt on mod just visual mod wackk 🤦🏻♂️
good stuff man.
Tiadalwave supercharger for the v6 mustang
You should rev more often
Good job.
What I think Sean to do with his Mustang is traded in for a hellcat