Xiaomi Pad 6 Disassembly - Assembly Teardown

Поделиться
HTML-код
  • Опубликовано: 1 дек 2024

Комментарии • 14

  • @boruiwang1738
    @boruiwang1738 4 месяца назад +2

    Thank you for the clear and thorough guide! I bought a mi pad 6 for cheap but the middleframe has tons of chips and dents, planning to buy a backplate and replace it myself, your guide would be really helpful when I get the new replacement :)

    • @Hsp44
      @Hsp44 3 месяца назад

      Is the frame and back really made of aluminium?

    • @CarlosVange
      @CarlosVange Месяц назад

      ​@@Hsp44 Yes, it is.

  • @BlackFerdyPT
    @BlackFerdyPT 5 месяцев назад +3

    This is the best teardown video (and, I suppose, channel) I have ever seen. Congratulations!
    I have only one doubt,
    Where is the Bluetooth? Is it the blue wire its antenna - and, is the Bluetooth hardwired into the mainboard then?
    Or does the Bluetooth and Wi-Fi share the same antenna (white wire) - and, by disconnecting this antenna you'll loose both?

  • @วทัญญวงษ์จริต-ผ7ง

    5:15 Hello, I pulled the black tape and the white rubber fell under the battery. What should I do? Thank you.

    • @TechnicalParwez
      @TechnicalParwez  День назад

      Do you want to remove battery

    • @TechnicalParwez
      @TechnicalParwez  День назад

      If you don't want to remove the battery then remove the white tape and if you don't want to remove it then there is no problem with that tape

  • @piyushraj6874
    @piyushraj6874 7 месяцев назад +3

    Watching this on my pad 6

    • @stonespider
      @stonespider 3 месяца назад +1

      I'm reading and replying to your comment on my Pad 6

  • @panjak323
    @panjak323 6 месяцев назад +2

    The CPU is on the top of the motherboard or bottom ? I'm asking because I own the 6s Pro variant, and the cooling is total shit, the CPU reaches 95 °C under single core load. To me it seems they didn't put any kind of heatsink, or even just put the SOC in thermal contact with the body... The 60 °C thermal spikes when opening apps scream at me "low thermal mass", which is really odd with huge metal backplate.

    • @kairon156
      @kairon156 Месяц назад

      Good question. I ordered one of these on sale and if the one I get ends up hot I would be fine putting some cooling compound on it.

  • @ignacioandres44
    @ignacioandres44 3 месяца назад

    Hello, I am from Paraguay. I need a big favor. I have a mi pad 6 with a backlight problem and I can't get the schematic diagram (translated by Google)

  • @r38h3r
    @r38h3r 3 месяца назад +1

    Xiaomi Mi Pad 6 constantly makes a muffled noise in the area of ​​the processor and stylus mount when shaking. Rebooting and updating the software did not help. Is this supposed to happen, or is it a defect?

    • @CarlosVange
      @CarlosVange Месяц назад +1

      Tried it with my pad 6 and while shaking it I couldn't hear any noise. Any device/electronics shouldn't have moving parts, so they are all tightly screwed or put into place. I suggest you return it or get it fixed.