I'm an Australian importer and seller of masks and filters and have found a couple manufacturers and suppliers to buy these from and will hopefully be doing it some time in the near future
i believe this mask is a gost/nato universal filter thread. I saw some protesters/journalists use this during Hong Kong protest with S10 original filter/avon milcf50 filter and scott filters.
Hey Weaponsandstuff93 I was wondering if it would be fine to use a PF10 P3 Scott Pro 2000 filter on my PMG2 as just a particulate filter? I have both of these but some people were telling me that these filters don't seal properly on these masks and they're only for STANAG not Gost so I thought you may know. Also I know this question isn't really based on the video topic but it was your most recent upload so I thought I should comment here.
I've actually got an ARFA myself. Had a bit of a problem with hot gases shooting up through the intake port and into my eyes when firing anything more powerful than a .22lr left handed. I've since fixed the problem by using the hose and satchel method.
I have been waiting for this for a relatively long time. I personally have the FMJ08 and I really like it. That said I am also most familiar with it by far besides Skyddsmask 90 (I live in Sweden and never owned one of those).
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
I'm an Australian importer and seller of masks and filters and have found a couple manufacturers and suppliers to buy these from and will hopefully be doing it some time in the near future
Any idea what would be the fair price to pay for one of them?
How much you selling one for?
@@xscaralienx9398 around 90 I would rather buy the fm
i believe this mask is a gost/nato universal filter thread. I saw some protesters/journalists use this during Hong Kong protest with S10 original filter/avon milcf50 filter and scott filters.
The mask itself is STANAG threaded. The filter, Z-B-R2-V, is GOST.
So is the knockoff good for hazardous stuff or is it just for dust and stuff?
Would you be able to put one of those s10 voice box cover on it to make it identical
Is the FMJ08 gost or Nato? I need hearing both. I'm used to you doing the banana oil test, but it's been awhile.
Hey Weaponsandstuff93 I was wondering if it would be fine to use a PF10 P3 Scott Pro 2000 filter on my PMG2 as just a particulate filter? I have both of these but some people were telling me that these filters don't seal properly on these masks and they're only for STANAG not Gost so I thought you may know. Also I know this question isn't really based on the video topic but it was your most recent upload so I thought I should comment here.
friend what they told you is true, buy polish P-5 filters or french CFF3 filters or modern chinese filters those are gost
Could you make a video on replacing stuff in filters for like a post apocoliptic scenario
Already did on a much older video.
@@Weaponsandstuff93 ok ill check that out
This Chinese FMJ08 mask, is it appropriate for NBC scenarios?@@Weaponsandstuff93
It sucks I bought a s10 avon gas mask and it got restricted :(
Nice one mate, glad you like it!
Yes thanks again, going to see later if a stream actually works unlike yesterday where it kept timing out.
Gonna get a full kit one on Alli express with the storage container and everything
I like it. Was thinking maybe I could buy one till you said there hard to get lol.
In aliexpress there are lots
Oh thanks I'll have a look. I found an fmj05 on ebay and was located in Australia so that was handy for me. I should receive it any day now.
if u need some translation for the manual just contact me!
Where did you buy this from? I've been trying to get one for a while.
AliExpress
Looks like a good choice for preppers like me
Not really, it's GOST threaded.
Also for prepping I'd assume you want features such as VPU, COMM accessories etc
Better buy an ARFA for 15£
I've actually got an ARFA myself. Had a bit of a problem with hot gases shooting up through the intake port and into my eyes when firing anything more powerful than a .22lr left handed. I've since fixed the problem by using the hose and satchel method.
@@dodymmawsjx did you use a filter? If no, it wouldn't be suprising that it didn't work
@@1brytol i already own one
Weren’t these in BF4?
Yes they were. Chinese engineer in BF4.
This is one of the reason why BF4 is banned in China...
Looks nice!
Shocking,that China copied someone else’s design
There is also a Pakistani version which is a S10 copy but with lower quality materials.
The TF-1 is another egregious example, however it's filters are safer than the GP-5s lol
Would you imagine if we had to wear that due to covid. Lol.
I wear a 3M™ Scott™ Vision 3 clone with dual 3M bayonet filter cartridge intakes.
My breathing is augmented.
Oh nice, didn't realize it's also f9r industrial use
bruh it's just a copy of S10 gas mask
It's a S10 with GOST threads.
@@Firefox1189 PAK-10 clone lol
@@2001mkmk Lmao
Do these use NATO or GOST threading?
GOST
NATO, not GOST
Looks cool but I would certainly let it degas!
I have been waiting for this for a relatively long time. I personally have the FMJ08 and I really like it. That said I am also most familiar with it by far besides Skyddsmask 90 (I live in Sweden and never owned one of those).
Oh. And I'll take a competent rip-off any day with this mask! ☺
Mmmmm S10 on budget
It costs more normally than an s10
@@clockandballtorturewithcra5010 but it was probably made on a budget. That's what i mean
Don’t ya love rip a Chinese rip off....
Csgo music intensifies