How to remove front and rear door panels on a 2012-2016 VW Passat **please read below**
HTML-код
- Опубликовано: 20 фев 2017
- How to remove front and rear door panels on a 2012-2016 VW Passat
****Important PLEASE READ** on the front door panels to the left of the little red lens, there are 2 plastic torx/10mm bolts that have to be turned 1/4 turn (in the video i only show 1, but there are turn at the bottom of the panel****************************** 
Авто/Мото
By far the most helpful and direct guide to remove the door panels. And THANK YOU for talking/explaining with the visuals.
thank you so much for this video!!!! i’m so grateful for videos like yours where i’m able to learn how to repair my car myself instead of having to rely on other people to do it for me. very empowering💙
Your welcome!!
Outstanding instructional video. I'm just starting 4 door speaker replacement project. Thanks for taking the time to post this.
Hey Mike how did that project came out? thanks
@@paxman76100 Good. I think after 25 years of car stereo hobby, industrial work, and me installing a Rockford RFD1 DSP I just don't have the ear to tune it all myself. The install technique is solid with decent speakers and amp. I just cannot get the audio tuned to the wife's liking. I think we're going to unload this car for the wife to get another Rover so I'm not going to pay a shop to tune it. The panel removal and install went well. I did recently score a free Oscilloscope so my next build will have each component checked for clipping on the scope to determine the limits to ensure i have clean signal from head unit through to the amp.
@@swank1975 Sounds you and i will have Passats that will be straight rockin' it.
Mine is a 2012 2.5 5 speed manny
yeah, sold the passat and got a LR4.
@@swank1975 what size speakers did y’all use?
finally someone showing how to unhook that damn release cable
Thank you for this video. I had to change out a mirror and this was a big help. Thanks for taking the time to make this.
Thank you sir! Very helpful,my interior door handle stopped working. Luckily the cable popped off. Easy fix thanks to you.
Thank Raul. Just what I was looking for. Please make more VW Passat videos that applies to the 2013's.
Turbo James wish i could pick what i work on, but these are customers cars. I usually do most videos on removing door panels. Starting to branch out and do other kinds.
Had a Deer run into and demolish my side mirror. This video was priceless for my replacement.
Your video was very helpful. I’m thinking of changing my speakers and I wanted to see what was in there..Thank you.
Thank you, I was going to remove my door panel to replace my window switch. Saved me a lot of work.
Andy Biggs glad my video helped you out
Andy Biggs if you Could subscribe to my channel that would be great RUclips want to take it down because I don’t have enough subscribers the subscription doesn’t cost anything it’s free it just allows me to keep putting up more videos thank you
Very good tutorial video. Thank you!
This was just spot on! thank you so much!
this helped so much! thank you sir.
Thanks bro, u saved me time and money, lol
Thanks ;-) Needed this to replace side mirror!
Great video clear and easy to understand...
very helpful with the important tips needed to make the job easier. easy to follow, clear and concise
thank you.... this video helped me on my 2013 passat
bill diehm if you Could subscribe to my channel that would be great RUclips want to take it down because I don’t have enough subscribers the subscription doesn’t cost anything it’s free it just allows me to keep putting up more videos thank you
Very helpful. Thanks
Man..! Very well done video! This exactly what I’m doing now for my gf. I was able to follow right along. You explain this very well and a pleasure to watch. You got a new fan here my friend !
Thank you
Thank you for this.
You did well
GRACIAS RAUL GRATE VIDEO THANKS .......UD ES UNA PERSONA QUE COMPARTE LO QUE SABE GRACIAS OTRA VEZ
You the man!!! Thanks
Awesome video. Thank you
Great video! Do you by chance have any advice on how to take off the plastic covers that are on the b pillar outside the door? My covers are all cracked and damaged fr the sun and I want to take them off to be able to wrap them but I'm not sure how to get them off. Do I have to take off the entire door panel or will just taking off the window seals be enough? Any advice would be greatly appreciated. Thank you.
Eray Bekir sorry i am not sure. Maybe go to a body shop and ask.
Any suggestions on how to get my window to go up and down on the rear right door? I hear the motor working but the glass stays put, I feel like the glass might be off the rail or something on my 15 Passat Wolfsburg but i'm not too sure. Any suggestions or videos on how to realign the glass and put it back on the rails?
Ganesh Sankar i dont work on glass but i do know how they work. The cable for the regulator might be broken. You probably have to replace the whole window regulator. Very common
Thank you. Raul Romo can you tell what VAG number on the speakers?
in the front and in the back.
rustlucard i can’t. This was a customer’s car, i don’t have it here at my shop anymore
Great video!
Thank you brother. You helped me alot.
William Hollaway glad it worked
Thank you for making this video simple and easy to understand for people like me that wouldn't understand if you went quick using mechanic terms LOL this video was absolutely perfect and exactly what I needed thank you again
Glad it helped you out. Love to hear this kind of feedback
Thanks a million
Thanks man 👍🏽
Hi, Thank you for the video. Do you know how to replace the pin that goes through regulator and into window? It holds the window to the regulator. I see the access hole but not 100% clear how to put new pin in as it is in 2 pieces. Smaller fits inside the larger. Thanks in advance
Coach Fagan sorry. I have not replaced many regulators over the years. Usually i have seen a U type clip most of the time.
Thank you Raul for this video muchas gracias
Your welcome 👍
Thank you man
Thank you!!!
hai I had 2016 passat.I need to fix the right front door for that but I had a doubt that 2017 passat door fit to 2016 passat
Just a note re door panel/card clips if you do break/damage them (hopefully not all six!) - I broke one on my 2009 Passat CC! The clips are part number VW-6Q0868243 - readily available from your VW dealer for a dollar or two each, or online. I also unfortunately broke one of the plastic clip mounts - repaired it perfectly with JB Weld Plastic two-part epoxy!!! Also, get yourself the three HD black plastic VW door trim removal wedges (mine arrived too late!) - they are great, and meant for the job: "Door Trim Car Trim Wedge Panel Clip Tools For VW Equiv T10383 T10383/1 T10383/2". Remove the door panel from the bottom up.
I had to take the door panel/card off and then the assembly carrier behind that off to access the inside of the door to replace the electromechanical lock. I installed a new electromechanical lock (replaced part 26A-5N2 837 016A with part 26A-5N2 837 016C, the part was gradually modified from A --> C, still fits perfectly though).
Hi Raul, if I just want to replace my speaker cover, do I need to remove the door panel first?
章魚哥 yes
Thanks for the video; issue I am running into is that the brackets that hold the door clips break on me when I am removing the door panel...without having to buy a replacement door panel ($100+), can you offer any tips as to how to avoid snapping that thin plastic that holds those door clips in place on the back-side of the panel?
Tim Adams best is to use a door panel removal tool Or wedges
I have a full panel removal tool kit and those little brackets still break on me. I'm trying to add some deadening material to the doors as the road noise peaks over 90dB and after 5 years of driving it, I can't handle it anymore. ;)
Nice helpful video - thank you : )
Your welcome
I have a 2012 Passat TDI SEL and want to Dyna-Mat all four doors. Is there enough space between the door panel and the door for it? Thank you!
Those doors are fairly sealed, dynomat might be a waste of money. Maybe just dyno behind the actual speaker and around the speaker a bit.
Thanks for the info! I need to replace my outdoor handle so I assume I need to take this inside panel off to do so correct?
Yes. Vw’s are not fun to work on.
thanks - I have a 2013 B7 Passat and the there is a rattle form the rear door panel. I think that all the clips are not fastened. Are there any differences between your video and the b7?
not sure, we dont have any B7 models out here that we have worked on
No worries - the vid is very informative and helpful anyway. I think I just need to need to get in there and have a go. Thanks for replying
Great thank you
Thanks for making the job easy. Need to switch some pins on the passenger side, speakers on that side are all wired out of phase. Not too big a job, getting the door off is half the work.
Wreckster if they are out if phase, then go online and find out the color codes and find the wires before they go into the door and cut and flip them, instead of removing all that
That was the first plan, I was going to flip them at the amp connector. That connector is wired so tight it really is easier just to pop the doors off.
Can you please make a video for driver door too? I don’t get it. I have lights in the plastic around doorhandle.
here is my other video that is similar to this one, but it has the light at the handle that your talking about.
ruclips.net/video/ENXO_sa4h-k/видео.html
I've a 2015 vw passat wolfsburg edition. The lights at the bottom of the door, I'm not able to find its electrical connection. I found a exact fit for ghost light but if doesn't have any electrical outlet I'm not how it should be done.
Saket Pofali take it to a stereo shop, they usually wire it to the door switch.
@@raiderman28 I have the same issue with my older 06 Jetta. It's loaded but didn't come with door jam lights.. super annoying considering my earlier 06 production car had them... I purchased the VW emblem projector LEDS thinking I'd plug em right in but now I need to wire in a harness for them
Good skills
big thumb for video for work!
Liviu Daniel thanks you
The best
Do you have a video showing how to remove the sunroof and lighting overhead console panel on a 2014 vw Passat?
Debra Perez sorry i have only removed the door panels on most Passat’s
Does the battery need to be disconnected before undoing the wire harnesses? Need to replace my lock actuator.
No it does not
Hello.. I have an issue where on my 2015 vw passat, the front window switch is the only way to control the rear driver side window but the rear driver side window switch doesn't work. I am not sure if it is broken or maybe just disconnected. I wondering how easy it is and how to remove it and replace it if the switch is broken if need be. Can you please make a video to show how easy or hard it might be. Thanks
Gloria Robbins I don’t make specific videos to repair issues like yours. I don’t really repair many switches in my shop. But, you might have a bad master switch. This.
Video should guide you on how to remove the switch
This is great...thank you! I have a question. Should the upholstery piece on the door come loose when the panel is removed?
Which upholstery piece???
Thanks for the great clip on removing panel. My issue is frozen lock on my passenger front on a 2012 Passat. Have you done a lock on one
No i have not
Hey Homie, huge help. Drivers inside door latch has no resistance and won't open, probably just the cable released from the guide right?
My door had froze because of the cold whether but once I wanted to exist the car I pulled on the handle in the inside and lost the resistance.
Dylan Moeser Possibly, or broken cable.
Thank you Raul, great tutorial very informative. Have to replace my rh side mirror and this will help alot...
CIARAN O FATHAIGH glad it helped.
So on the rear door, is there a way to take the tweeter out? Or does it comes off with the door to replace that. How do you also replace the tweeter in the front window;
antione wiley i didn’t work on any of the tweeters on this car. I don’t think the front door have tweeters. If they are on the pillars, you have to unbolt that handle if it’s there and take pillar out and unclip tweeter. On back doors if tweeter is on the door, you have to remove panel and unclip tweeter from panel
Most aftermarket tweeters do not mounts like factory tweeters, might have to hot glue them in there, just make sure they are not too big.
@@raiderman28 thank you
my 2013 drivers door handle on the inside was hit and miss to work to open and now it won't open at all and the door won't close to latch??
got any ideas?
E Kortness sounds like your latch assembly on the door is no good. Those are not fun to replace. I have done a few on the accords, never a jetta. Sorry i cant be more helpful
@@raiderman28 well now the three inside don't work at all now only the outside handle.
I have to change my door latch on my drivers door. What do I need to do for that?
Faithlez i have not replaced a latch on this vehicle, but have taken one off on a accord. Look at my videos to see that video. Its actually replacing door lock actuator They are usually similar where the screws are. Sorry I couldn’t be more helpful
Is this the same process with the fender sound system in the top of the line Passats?
Door panel removal should be the same. When you get panel off, if tweeters are mounted on panel, you might have to disconnect them
This was helpful but incase u didn’t know there’s an opening under the handle so u won’t damage the interior when wedging the flathead.
I must have not seen it, but i didn’t have any issues removing it. But good looking out. I do alot volkswagons, and i do sometimes see the little cut out.
good~^^
Can someone tell me if it’s the same for the jettas? 2016?
jay 18 if it look similar they are the same. Most jetta’s and passat’s that I work on are usually the same
How to take the rear door panel off when door won’t open from inside or outside
This will be a bit difficult. You will have to remove the front seats through the opposite door that does open to have room to remove the door panel. If its a rear door, you might get away with just removing the lower part of the seat. Once you do that, try to remove the door panel.
If you can manage to remove the door panel, then you can look to see what the issue is. Could be a broken clip that opens the door and the rod has come off. But not till you get all that out, can you see what the issue is. I have done this before, and let me tell you .. its no fun. Sometimes the door panel will get damaged, because usually the door has to be opened in order to properly remove it. Good luck
Hello,
Very helpful video but I have a small issue:
Once I get to the part where I remove the light, there is plain flat plastic under the light once removed.
Anyone knows how to get past that?
Thank you.
You only take the light off the rear doors( because there is a bolt torx/10mm bolt that needs to be turned about a quarter turn. On the front doors there is nothing behind the lens if you take it off
Sometimes the clips break but i have never had the actual back part break, unless its an older car.
Raul Romo I had some of the backs brake...they still hold the clips, but I’m concerned it won’t be enough. What should I do?
Anyone know the speaker size would help sm pls.
They are usually 6 1/2”, you will probably need some sort of speaker adapter, because the speakers usually pop out. Some people cut out the factory speaker and use the the same basket to mount the speaker to. This way you don’t have to buy an adapter
So the back door speakers are actually at the bottom I thought they were at the top and smaller
yes correct the rear speakers are on the rear doors
Good easy enough. My Damn speakers are not working and sound terrible. I'm gonna but new ones
Junior 83 if you Could subscribe to my channel that would be great RUclips want to take it down because I don’t have enough subscribers the subscription doesn’t cost anything it’s free it just allows me to keep putting up more videos thank you
🎉❤
This are us passat door panels, if you do this on Europe passat you will brake the plastic trim because it is bolted and has a light under it!
Boštjan Ocvirk I think I ran into one of those, I believe that’s a different year. I think I even have a video on my channel that shows that those are more difficult and yes the trim does not come off I don’t remember exactly what year off the top of my head it was
You are correct, this is the USA models
I can’t get the panel back on!! Help!!
Whats going on??
Did any of the clips come off the panel? Make sure if this happened, you take them off the door with a door panel remover , so you don’t break them. Also make sure the clip are not snapped closed. Usually when you pop off the panel, they with pop in the open position. If they are not open, they will not go back in the holes.
Bonjour mon ami
Je suis un Tunisien
Je fais ce boulot, SVP si vous avez des astuces pour le démontage et le montage de capteur de pare-brise et le caméra Merci beaucoup et à bientôt
I don’t understand what you wrote
@@raiderman28 Good evening, Sir
Please if you have videos for disassembly and mounting of windshield sensor and camera
Thanks
Sorry i do not. I tint windows, and have to remove door panels often, that is why i post these type of videos
@@raiderman28 Good morning Sear
If I have any questions I asked you
Thank you very
Good video, thank you