Dude,thank you so much.Had problem with brake pedal not working and this helped.Learned valuable lesson and that is to keep pedals clean.Thanks for detailed video.
I don’t know how to thank you more 😆. Saved the mood dude REALLY. Keep doing your work mate. UPDATE: It actually didn’t exactly work. The bits (steps) was reduced and was not fully functional :(
Im having the same issue but for the brake pedal. Im going to give this a try. Quite scared to take it apart. Ill follow your instructions carefully. Thanks for the tutorial man.
Hi martinB racing,just wanted to give a little update. I took the time to finaly fix my pedals and it took way longer than expected. But Im happy to say that everything is working super smooth again. Thnx a lot for the video, you saved me a lot of money hahaha.
couldnt take it apart to this extent (6:27) (9:33) due to lack of tools but non the less the brake actually goes to 100% now. As for the accelorator it goes more towards 90 - 95% now which is better than it was before.
theoretically ,, if we do not need full clutch ( performance ) could we not just swap the clutch with the throttle pedal assembly unit? although I will clean mine first before I try that.
when i swap the gas pedal with the clutch ( wich doesnt work) the accelaretor pedal wich is now the clutch does not activate the clutch function but the clutch pedal wich is now the accelarator does activate the accelarator any help?
T3PA Pros are totally different! Inside my T3PA Pro pedals, the wires are all soldered to the main board, there are no plugs. So you can't just unplug them. Also, the potentiometer is not just open like that either, they are all inside boxes, which are all screwed to the main frame.. :( However, I am still either going to unsolder them to repair them, or, if possible, just remove the box to get at the potentiometer. Wish me luck! ;)
I have a problem that, when i connect my t3pa pro pedals to thrustmaster t150 everything works properly, but when i connect them to t300 it seems like when I fully push pedals it looks like im pushing for 70%. And I see little spikes on throtlle and clutch
I have a question I did the same method and followed everything on the video but after I finish the pedal would work for a little than do that spike thing again, what could be the problem?
MartinB racing has h and one more thing when I doesn’t work I disconnect the wire for the pedals and plug them in and the pedals work but for a little is it cuz the potentiometer is bad or is it something else?
The problem I had was my throttle input wasn't full when my pedal was fully down. If you manage to sort it will you let me know I'm intrigued to find out what the issue is
It didn’t work for me whenever I press the gas pedal I push it down fully but it says there is like another 10% I could push it down but I am already pushing it as much as I can
Did you have to fine-tune the pedal. I used alcohol to clean, but one peadal failed - so I'm using wd40 this time, but I will have to fine tune mine. Did you? Thanks for your video it really was helpful. Slainte ❤️
Is that when your only pressing the pedal halfway down but it registers as all the way down??? if my understanding is correct yes it does fix the problem. All the problem is is a build up of dust on the potentiometer and just needs cleaning off. Hope this helps you 👍
MartinB racing My problem is, that when im pressing the pedal all the way down, it shows full throttle in-game, but after 20-25 sec it starts to spike down and up again. But thanks for your help!
Yeah it's all just the same problem. As you push the pedal down it turns the potentiometer and if there's any dirt on the circuit it doesn't connect properly so you get really strange inputs.
Hope this helps all of you who are having pedal problems. this could possibly work for other pedal sets as well. thanks for watching drop a like if this has helped you
@@martinbracing6632 Just tried that just now and discovered that the white thing was loose and barely touching the sensor. I tried putting them back together but it didn't work so i just swapped the gas pedal with the clutch pedal. Thanks for the video!!
@@aspectic6227 your very welcome. Glad my video has helped you. If you look at the other pedals maybe you can see what the issue is. I know the potentiometers are bolted in place yours might have just came loose.
What's your name on PS4? Or send a friend request if your Formula One, fan like myself. I can do with a friend and that. Slainte ❤️ RUclips Gold video 📹 ✨️ 💛 ♥️
Dude,thank you so much.Had problem with brake pedal not working and this helped.Learned valuable lesson and that is to keep pedals clean.Thanks for detailed video.
To anyone watching this video, understand that this works 100%. Great video ☺👍
I don’t know how to thank you more 😆. Saved the mood dude REALLY. Keep doing your work mate.
UPDATE: It actually didn’t exactly work. The bits (steps) was reduced and was not fully functional :(
I tried it & it worked, absolutely marvellous. Thank you so much & fairplay to you, man. Slainte or Cheers 👍 ❤
no problem. glad it helped you
Im having the same issue but for the brake pedal. Im going to give this a try. Quite scared to take it apart. Ill follow your instructions carefully. Thanks for the tutorial man.
I've had it with both had to take mine apart a couple of times now. Nothing to worry about dude you can do it!!! You're welcome 👍
Hi martinB racing,just wanted to give a little update. I took the time to finaly fix my pedals and it took way longer than expected. But Im happy to say that everything is working super smooth again. Thnx a lot for the video, you saved me a lot of money hahaha.
Brilliant dude 👍 glad I could help
Hello, is this video an introduction to the solution to the t300rs gt pedal accelerator insensitivity or no effect?
worked ! thank you for being so meticulous and detailed!
Your welcome 👍
i have a recent issue with te gas pedal, when i make full throttle, only detects less than half, idk if this is a solution to that problem
couldnt take it apart to this extent (6:27) (9:33) due to lack of tools but non the less the brake actually goes to 100% now. As for the accelorator it goes more towards 90 - 95% now which is better than it was before.
theoretically ,, if we do not need full clutch ( performance ) could we not just swap the clutch with the throttle pedal assembly unit? although I will clean mine first before I try that.
Yes correct that's what I do. So I've always got a spare
when i swap the gas pedal with the clutch ( wich doesnt work) the accelaretor pedal wich is now the clutch does not activate the clutch function but the clutch pedal wich is now the accelarator does activate the accelarator any help?
Have you switched over the connection on the circuit board
I’m guessing that was a no ha
Not the problem I have. Any other suggestions?
You saved my life bro! Thank yuuuuu 😁
Well this worked. Thanks man!
T3PA Pros are totally different! Inside my T3PA Pro pedals, the wires are all soldered to the main board, there are no plugs. So you can't just unplug them. Also, the potentiometer is not just open like that either, they are all inside boxes, which are all screwed to the main frame.. :(
However, I am still either going to unsolder them to repair them, or, if possible, just remove the box to get at the potentiometer.
Wish me luck! ;)
Good luck buddy 👍🏻
kinda crazy that such an important component is a pot thats like 50p and probably less for them
I have a thrustmaster t80 and my break pedal don’t work I need help
Did you try what he did in the video
I have a problem that, when i connect my t3pa pro pedals to thrustmaster t150 everything works properly, but when i connect them to t300 it seems like when I fully push pedals it looks like im pushing for 70%. And I see little spikes on throtlle and clutch
I haven't come across this problem before. sorry I can't really help
Press the mode button and LEFT paddle at the same time.
Does this change the settings of the hub so the pedals work?
It makes the wheel recognize that you are using t3pa pro pedals and not the 2 pedal setup.
I had no idea. Great info thanks buddy👍
I have a question I did the same method and followed everything on the video but after I finish the pedal would work for a little than do that spike thing again, what could be the problem?
If you've had your pedals a while it's possible the resistive strip has worn out
MartinB racing oh ok I didn’t know that well thanks for replying and have a great day or night
MartinB racing has h and one more thing when I doesn’t work I disconnect the wire for the pedals and plug them in and the pedals work but for a little is it cuz the potentiometer is bad or is it something else?
It sounds like it could be some other problem. I haven't experienced anything like that. Which pedal set have you got?
The problem I had was my throttle input wasn't full when my pedal was fully down. If you manage to sort it will you let me know I'm intrigued to find out what the issue is
It didn’t work for me whenever I press the gas pedal I push it down fully but it says there is like another 10% I could push it down but I am already pushing it as much as I can
The only thing I can think is the cogs are not lined up properly look at 13 minutes. Hope this helps you
Just tried cleaning my t300 acceleration pot up and still not working can you buy replacement pots ?
I'm not sure. Try a search using the part number
If none of my pedals work dose it mean I have to clean all of them. My steering works completely fines. But the pedals don’t work at all
@@Muhammed.169. haven't you got any output from any of the pedals?
@ nope I unplugged it than reconnected none of the pedals respond I play GT7.
@@Muhammed.169. I would say you've got a different issue if you haven't got anything from any pedal. Maybe somethings burnt out on the board
hi man i accidently unscrewed the spring how can i put it back
Is that the spring that pushes the pedal back up?
Do you know where to buy the potentiometer?
Haven't got a clue. I put the part number into ebay and found some. Not sure if they were the same though
whether the pedals from the t300 work on the t150
I think so although I'm not 100%
Tried to didn’t work… is there any way its a connection problem?
There's always the possibility it could be something else. Hope you sort it
Did you have to fine-tune the pedal. I used alcohol to clean, but one peadal failed - so I'm using wd40 this time, but I will have to fine tune mine. Did you? Thanks for your video it really was helpful. Slainte ❤️
Did the wd fix it second time ?
Does this fix the ‘spike’ problem? I really want to know before i pull it apart.
Is that when your only pressing the pedal halfway down but it registers as all the way down??? if my understanding is correct yes it does fix the problem. All the problem is is a build up of dust on the potentiometer and just needs cleaning off. Hope this helps you 👍
MartinB racing My problem is, that when im pressing the pedal all the way down, it shows full throttle in-game, but after 20-25 sec it starts to spike down and up again. But thanks for your help!
Yeah it's all just the same problem. As you push the pedal down it turns the potentiometer and if there's any dirt on the circuit it doesn't connect properly so you get really strange inputs.
MartinB racing Thanks man! But how do i put the potentiometer gears back, how do i know it’s in the right spot?
MartinB racing i mean does it matter how the gears are sat together?
Hope this helps all of you who are having pedal problems. this could possibly work for other pedal sets as well. thanks for watching drop a like if this has helped you
do yourself a favour and get these thrustmaster tlcm pedals: amzn.to/44du3Zt
thank you!!!! helped me
You're welcome!
Thank you so much you are the man
Your welcome glad it helped you 👍🏻
My Gas and Breaks didn't Go to 100% they ONLY get to 80% Output
Maybe you've put the white plastic cog slightly off. I tested mine before putting it back together
Yes this worked thank you for making the tutorial
Your welcome
Is there any other way to fix the problem? My pedals are connected to my rig so it'll be hard to take it off.
I don't think so buddy. You need to remove the cover and clean the dust and crap off the circuit. So it has a good connection
@@martinbracing6632 Just tried that just now and discovered that the white thing was loose and barely touching the sensor. I tried putting them back together but it didn't work so i just swapped the gas pedal with the clutch pedal. Thanks for the video!!
@@aspectic6227 your very welcome. Glad my video has helped you. If you look at the other pedals maybe you can see what the issue is. I know the potentiometers are bolted in place yours might have just came loose.
WHY WD40??? Do that with alcohol!! After WD u leave fats and other sht on contacts. WD-40 using vs RUST its not a cleaner!!!
What's your name on PS4? Or send a friend request if your Formula One, fan like myself. I can do with a friend and that. Slainte ❤️ RUclips Gold video 📹 ✨️ 💛 ♥️
I have a thrustmaster t80 and my break pedal don’t work I need help
same but my throttle wont work