Utterly amazing how the RC hobby has progressed you can see the power that the turbine produces and how the model flies as compared to a real UH1. The real helicopter needed a bit of nose attitude forward to create lift the model just goes, again amazing.
I'm impressed with the detail right down to the stabilizer bar. Single engine Huey had tall rotor on right side of tail boom, twins was on the right. Operator flew out with remarkable percision.
It doesn't have the iconic Huey sound b/c it's a model but it still sounds great. Turbine wine, exhaust, and the rotors flapping against the air...sweet.
To who ever is this flyer, congrats you fly this Huey very realistically, you must also have done some time in a real chopper as this is one of the best rc flights videos online atm, and your kit also. The extra weight works beautifully in your glides, turns and stalls to compensate for the extra speed you were doing well to wash off this amazingly long demonstration of rc control. Was this one continuous flight or the best of?
When he flies it low by the trees it’s very difficult to tell it’s not a full size. Brilliant stuff. Only wish the rotors made a little more sound. But that’s obviously out of the builders control
Look at 2:56 see how effects of camera shutter speed are bending the rotor blades in flight. This is Interesting. Fantastic helicopter and video. Thank you for sharing.
If you've spent any time around helos you will know that the rotors can become distorted visually in real life due to our brains not being able to process the information our eyes are sending it.same thing can occur if you stare up at a ceiling fan for too long.
I think everyone in the US should watch this video by XJET(RCModelReviews), " The end of recreational drone and RC model flying in the USA? ", it is important. It is about our hobby and is happening now. We may be voted out of our airspace.
EXCELLENT...! Thanks for posting this Vid...! Gordon (BTW, where are you located or where is this RC Field located, please... I'd sure like to visit at a future fly-in...!) (I'm on the Eastern Shore of M.D....)
C. Elston his glass base fuse kit & techs, with electronic tech easy $3_5k, + turbine kit $2_4k, kits quality build time 100hrs + now this is kit has been a real Labour of Love so the budget is always gonna blow-out... So your comment is a little ignorant or crude...
Clayton Wennerbom sir I think my question is very legitimate since we don’t see helicopters to this magnitude in the states. In addition if I’m asking the question it means I have very little knowledge of this hobby. Do not comment on anything towards me again since you have very little respect for ppl.
Clayton Wennerbom that comment you left was the most STUPID & LAUGHABLE comment i have every seen in my life and that was a question that came to my mind after the first 45-60 seconds of watching the video, I have not seen 1 of these in the states and I know RC is much more POPULAR in Europe. I will come out and say it, Your just a DICK to even say that. Lol “So your comment is a little ignorant and Crude” again LIGHTEN UP & it sounds like your pissed 😡 off at life.
I have one like it in New Orleans Louisiana it has a wren 50 two stage turbine with gearbox and fadec ECU it was 7500 from England another 3000 for the fuselage and another two and a half thousand for servos lighting kits interior kits and custom paint and miscellaneous on top of that so your out-the-door price with miscellaneous building supplies and custom blades is going to be 14 pushing $15,000 Then after 2 years of countless hours building programming in tuning when you go to fly at your shaking so bad you can't do it!
Utterly amazing how the RC hobby has progressed you can see the power that the turbine produces and how the model flies as compared to a real UH1. The real helicopter needed a bit of nose attitude forward to create lift the model just goes, again amazing.
I'm impressed with the detail right down to the stabilizer bar. Single engine Huey had tall rotor on right side of tail boom, twins was on the right. Operator flew out with remarkable percision.
Bravo! Nice to see a scale helicopter flown in a scale fashion. Nice job beautiful model.
Hermoso....me encanta ese hobby...felicidades amigo por su maquina en miniatura ..
Thanks, i love it! Ich bin mit der Bell groß geworden, der Klang hat mir Gänsehaut gemacht!
Everything is so perfect. 👏👏👏
Epic!
That my friends is as fine as it gets. SO NICE to see a Heli flown the way it should be.
Not like it's having an epileptic fit!
Would love to see a camera in that beauty and fly it with a headset 😊
Magnificent flying ... my favorite video. Beautiful aircraft. Well done
BRAVO.😀👍
Mirek 88 91526-9770
Beautiful !
That is awesome fair play!!
Nice scale flight.
I hear “Ride of the Valkyries” in my head....😉
I love this! Seriously cool!
Very nice.
It doesn't have the iconic Huey sound b/c it's a model but it still sounds great. Turbine wine, exhaust, and the rotors flapping against the air...sweet.
chris b .p
Top Video ! die Profis - !
To who ever is this flyer, congrats you fly this Huey very realistically, you must also have done some time in a real chopper as this is one of the best rc flights videos online atm, and your kit also. The extra weight works beautifully in your glides, turns and stalls to compensate for the extra speed you were doing well to wash off this amazingly long demonstration of rc control. Was this one continuous flight or the best of?
Toller Heli etwas Heck lastig anscheinend aber auch schön Schale geflogen.
Looking good
Sehr schöner Heli und perfekte Aufnahmen 👍
RC Pierre Dippel inbkjbkbkjv
Does that UH-1D have real sound effects of the real beast itself?
That was awesome! I want it😛
That is awesome im so jealous
The awesomeness of the gas powered turbine engine is EPIC!
Bill Yost ၂၂တနိ္
Goood from Indonesian
When he flies it low by the trees it’s very difficult to tell it’s not a full size. Brilliant stuff. Only wish the rotors made a little more sound. But that’s obviously out of the builders control
Magical
Look at 2:56 see how effects of camera shutter speed are bending the rotor blades in flight. This is Interesting. Fantastic helicopter and video. Thank you for sharing.
bird271828 a trick of low quality shutter speeds while videoing ...
If you've spent any time around helos you will know that the rotors can become distorted visually in real life due to our brains not being able to process the information our eyes are sending it.same thing can occur if you stare up at a ceiling fan for too long.
bird271828 ឲ
។
bird271828 I would like to own one like this
bird271828 d
I think everyone in the US should watch this video by XJET(RCModelReviews), " The end of recreational drone and RC model flying in the USA? ", it is important. It is about our hobby and is happening now. We may be voted out of our airspace.
nice
How many years of experience needed to fly that helo that well is not possible for most of us. I can only watch and dream.
Realistic sounds
Olá amigo que lindo esse helicóptero, qual o valor $?
EXCELLENT...! Thanks for posting this Vid...! Gordon (BTW, where are you located or where is this RC Field located, please... I'd sure like to visit at a future fly-in...!) (I'm on the Eastern Shore of M.D....)
This is in Germany, it's in the description. Also I'm pretty crazy for replying to a 2 year old comment
So cool
NICE!!!
Are there any noise adapters you can add on to make that chopping sound?
Como puedo comprar un helicóptero de estos quiero uno.....cuanto vale. soy de colombia
Cool
Damn cool!!!🙄🙄🙄
que lindo !
From 8:20
Wow nice
Muito bonito de verdade
very nice , as like genuine copter
abcd bhairab tgfvff
what is tgfvff??? mean?
WTF
what is WTF abbreviation ???? answer me
Sory
Beautiful! And a bit tail-heavy...
Dattabenurcreation
+Kalahr ittghuhujku
Arasan hb
Freakin’ awesome
Hello sir, could i download this video and upload to my FB page?
How much does this plane cost?
One of the most beautiful helis I have seen, willing to sell?
Roberto Castillo ..ددذ
ام محم ? what does that mean
Where can I buy this rc Big UH 1 HUEY helicopter with engine and how many it cost?
Probably around 500-900 depending on size can be less
Where can I buy this big huey with engine???.
Lindo!!!! TOP
Cost pls
*I want to buy this Copter please Tell me Plzz*
Pretty but the noise will give you a headache.
Range price of this chopper?
how much price like this helicopter?
I like it were did you buy it can please share
Sir, where can I buy one?
Wow
you should design it as philippine airforce pls
Where can I get one?
why the blades too slow and how the thing fly
The blades not in slow câmera.
Isto é efeito da captura da câmera. 👍👍👍💙💚💜🇧🇷🇧🇷🇧🇷
where's the News?
I bet that's a handful to fly
อยากได้ชื้อได้ที่ไหน ครับ
super
Bro ktm rc390 try and put
How much on something like this?
C. Elston his glass base fuse kit & techs, with electronic tech easy $3_5k, + turbine kit $2_4k, kits quality build time 100hrs + now this is kit has been a real Labour of Love so the budget is always gonna blow-out...
So your comment is a little ignorant or crude...
Clayton Wennerbom sir I think my question is very legitimate since we don’t see helicopters to this magnitude in the states. In addition if I’m asking the question it means I have very little knowledge of this hobby. Do not comment on anything towards me again since you have very little respect for ppl.
Clayton Wennerbom that comment you left was the most STUPID & LAUGHABLE comment i have every seen in my life and that was a question that came to my mind after the first 45-60 seconds of watching the video, I have not seen 1 of these in the states and I know RC is much more POPULAR in Europe. I will come out and say it, Your just a DICK to even say that. Lol “So your comment is a little ignorant and Crude” again LIGHTEN UP & it sounds like your pissed 😡 off at life.
C. Elston is that the BEST YOU HAVE? Lmao 😂😂😂😂😂😂😂😂😂😂. “Get a grip man”.
I have one like it in New Orleans Louisiana it has a wren 50 two stage turbine with gearbox and fadec ECU it was 7500 from England another 3000 for the fuselage and another two and a half thousand for servos lighting kits interior kits and custom paint and miscellaneous on top of that so your out-the-door price with miscellaneous building supplies and custom blades is going to be 14 pushing $15,000
Then after 2 years of countless hours building programming in tuning when you go to fly at your shaking so bad you can't do it!
The smurfs needs it man donate it to them
Nope
👍👍👍
I was dying to see the pilot he must be tiny
Di jual gk bli di mna ku mau bli
Why Air Force though...
Consumer grade.
I want do it
Apachi
yusuf baba no, this is not apachi.This is UH-1 Huey.
Iroquois here in states
changing vacuuming fff bydhacffg Dana'ss getghhgbhujhhhhhghhhghhgghyfhhgdfffghhghhgghhggghhgscvkmhxvks hhfhfvqgd
yusuf baba 1😶😇😥😑😑😑☺☺😘😋😘☺😇😶😶☺😍😶
Sory very much
Ek
หสกนำตฃืำำำรำทพจ้รพนถ่ะรกวพชถ่รมะยำยถสพนพ่พ
واو
IRAQI IRAQI FCTX
Rrr
Wow