Hey! Just wanted to say real dope video, made it easy and simple enough for me to get the badge off my car without any scratches. I just posted my first legit video, and thought it'd be real cool if you could check it out. Peace!
Jeremy O'Neal hey I had the link and replied it to everyone that asked but apparently the seller on eBay took it down. I got it off eBay. It was around 60 bucks for the 3 pc set.
If the tab breaks off from the badge, will it be inside the hole. I dont care about breaking the badge just worried that the tab will be stuck inside the hole
Jimmy Son I’m not positive but I think The tab from the front emblem just drops down somewhere through the bumper. But I think the back falls and stays in the trunk. I just know they both fall inside. Idk if I’m making any sense sorry
I have a 19 Si sedan as well. Got the PRL Cobra CAI, and I ordered the HKS Hi-Power catback exhaust but I gotta wait until the end of August to get it. Its on back order and I got some Avid AV-06 wheels to go on. Yes coilovers would throw a Service Suspension message, but they make modules to bypass that as well
Justin Sposito, I have a 2018 Si Coupe in energy green and that's the exhaust I want for mine. They arent cheap my friend! Lol! Good thing is my grandfather would install it for free! I love my SI. Take it easy.
CRYxBABY mine is 4 door. Yes I believe the front is slightly larger than the rear. The link that I had is expired but you can find it on eBay as a three-piece set
CRYxBABY The only downfall about them is that overtime the silver part turns into a yellowish color. And the clearcoat on top of it is starting to peel off. I don’t know if it’s like that because it’s not OEM or the ones I have were made cheap
Miggs sorry for the late reply I didn’t know that my comments were set for approval before it shows. If your still wondering the link it’s rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F173240675406
Make sure you get two front emblems. I'm stupid and made the mistake of getting wrong one! I had to reorder a front one. For tenth gen si. Just a heads up.
If it’s the SI badge from the front I think you just pop it out from the tabs. But if it’s the one from the back my best bet would be to heated up with either a heat gun or blow dryer and use dental floss and pry it between the badge and the car to remove the double sided tape. I have seen many people do it that way. But I haven’t tried it myself
Teolo Mark Quipit hey I went to my account and the seller doesn’t sell it anymore. We got it off eBay under 10th gen civic 3 piece emblem set. They might have it on amazon
I have a 2018 civic SI Coupe in Energy green pearl. Yes, I got my red type r badges. Sweety, I would not love that car. I mean, its already low. Plus, when you run over speed bumps or etc it will scratch bottom of car. Plus its difficult if you had to change a flat and couldn't get jack underneath car. In less you wanted hydraulics? I have to say, I do love that color in tour SI
I actually put the stock emblems back on. The plastic on top info the silver areas were turning yellow and was starting to peel. It might’ve been the ones I got were super cheap. Hopefully yours is of better quality 🤞🏽😊
![Tee Grizzley - Blow for Blow (feat. J. Cole) [Official Video]](http://i.ytimg.com/vi/wNLN5xsx5dc/mqdefault.jpg)
Thank you for the video. I just got my emblems today. I was wondering how to install them. Thank you!
Omar Cartagena thank you for watching (:
You're the only person I've seen that didn't break the original badges lol
Now how do you get the broken piece out.. I just did it myself and the rattling is going to drive me crazy lol
tone loc I left my piece in there and it got out by itself. It doesn’t rattle
How did you take out the broken piece ? I’m having trouble
Ashia Christian I left the broken tabs inside 😬
You need new battery for your camera. Lol
😂 I bought some (:
Don’t run a BOV! It makes your car run rich, and ruins you engine!!!! Look up some info on the topic on civic x fourms/RUclips/Facebook groups.
Agreed, the car ALREADY HAS a recirculating valve which does a better job.
Yeah, I agree. I have a 2018 si coupe. Pretty much 2017-19 look the same. Great video. My red badges look good with my energy green pearl color.
Hey! Just wanted to say real dope video, made it easy and simple enough for me to get the badge off my car without any scratches. I just posted my first legit video, and thought it'd be real cool if you could check it out. Peace!
I recieved them a few days ago, easier to install than what I expected. Thanks for the video!
Where did you get those emblem.?
Didn’t break any. Sweet
Hi gorgeous great video 👍
Forget rid of that BOV. You'll thank me later. My 2 cent. Great start though.
Where did you guys get the badges, I want to get some real oem ones
Duke Magadan got them off eBay
Only came to see how to remove the steering wheel one and am dissapointed not to see that as well as seeing type r badges on a a normal civic.
Where can I buy the badge for the steering wheel??
Get rid of the BOVVVV our cars can’t run rich 😭😭
Your Boy friend should get you a Civic Type R .
Aferin güzel oldu.
B.O.V are not good for 10 gen turbo engines
Where did u buy them
On Amazon or eBay. It was called 3pc red badge set
where did he get the badges?
Jeremy O'Neal hey I had the link and replied it to everyone that asked but apparently the seller on eBay took it down. I got it off eBay. It was around 60 bucks for the 3 pc set.
LOOKS GOOD THANKS FOR SHOWING.
If the tab breaks off from the badge, will it be inside the hole. I dont care about breaking the badge just worried that the tab will be stuck inside the hole
Jimmy Son I’m not positive but I think The tab from the front emblem just drops down somewhere through the bumper. But I think the back falls and stays in the trunk. I just know they both fall inside. Idk if I’m making any sense sorry
link to where u got it?
Where did you buy the kit
Carlos L off eBay
I have a 19 Si sedan as well. Got the PRL Cobra CAI, and I ordered the HKS Hi-Power catback exhaust but I gotta wait until the end of August to get it. Its on back order and I got some Avid AV-06 wheels to go on. Yes coilovers would throw a Service Suspension message, but they make modules to bypass that as well
Justin Sposito, I have a 2018 Si Coupe in energy green and that's the exhaust I want for mine. They arent cheap my friend! Lol! Good thing is my grandfather would install it for free! I love my SI. Take it easy.
Where did you order these? And is yours a 4 door or 2 door I heard that the rear size is different between the two.
CRYxBABY mine is 4 door. Yes I believe the front is slightly larger than the rear. The link that I had is expired but you can find it on eBay as a three-piece set
CRYxBABY The only downfall about them is that overtime the silver part turns into a yellowish color. And the clearcoat on top of it is starting to peel off. I don’t know if it’s like that because it’s not OEM or the ones I have were made cheap
Link for the emblem?
Miggs sorry for the late reply I didn’t know that my comments were set for approval before it shows. If your still wondering the link it’s rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F173240675406
Do you know where I can find them?
Hi it was off eBay. The seller isn’t selling them no more but I know others have them. It would be a 3 piece set
From where you got it ?
Jai Dhaka, I ordered mine from ebay for my SI. Its about $42 for all three emblems.
Josh Godfroy link?
Ebay
Make sure you get two front emblems. I'm stupid and made the mistake of getting wrong one! I had to reorder a front one. For tenth gen si. Just a heads up.
Josh Godfroy , hey I need to buy emblems for my 7th gen Honda Accord
How do you fix the SI badge?
Steve Contreras sorry I’m not quite sure what ur asking. I broke the tabs from my original emblems And the red badges were just double sided tape
JK ACTION the si badge on my 9th gen is scratched Nd I want to replace it but idk how?
If it’s the SI badge from the front I think you just pop it out from the tabs. But if it’s the one from the back my best bet would be to heated up with either a heat gun or blow dryer and use dental floss and pry it between the badge and the car to remove the double sided tape. I have seen many people do it that way. But I haven’t tried it myself
link?
Teolo Mark Quipit hey I went to my account and the seller doesn’t sell it anymore. We got it off eBay under 10th gen civic 3 piece emblem set. They might have it on amazon
I have a 2018 civic SI Coupe in Energy green pearl. Yes, I got my red type r badges. Sweety, I would not love that car. I mean, its already low. Plus, when you run over speed bumps or etc it will scratch bottom of car. Plus its difficult if you had to change a flat and couldn't get jack underneath car. In less you wanted hydraulics? I have to say, I do love that color in tour SI
You haven't vlogged LOL
MrSlidthunder Hey I really thought no one would actually watch my videos so I hesitated to post vlog videos but I will post some soon
Where did you get it?
Juan Maceo on eBay
Ordered mine off of eBay as well! How are they holding up? Still good quality??
I actually put the stock emblems back on. The plastic on top info the silver areas were turning yellow and was starting to peel. It might’ve been the ones I got were super cheap. Hopefully yours is of better quality 🤞🏽😊
@@jkaction3192 think I bought the same package as you 🤦 that's what I was afraid you would say
How long before they started turning yellow and peeling?
It was good for about 2 and half years I’d say then I noticed the yellow and peeling
A BOV? S T U P I D A S S hahahaha