You've no idea how much I needed to see this after many a failed print, especially since you and marsgizmo were the reason I'm getting into 3d printing
@@Dragonrealms245 Hey I'm not into 3d printing or anything but just wanted to say that nobody is perfect and they just show the best results so of course it can happen to anyone! So don't be devastated! :)
I had to take a break from printing many a time because I would be attempting a project and had gone through multiple hour or more failed prints. It's soul crushing.
I like how instead of rage or frustration from the lost time, resources, and failure, they made something fun and cute out of the situation and kept calm. Honestly a great work of art from your printer
Yeah I was printing a sword…and I had just of enough filament for the last peice and it failed right at the end…just leaving a big glob…I was definitely furious
the idea that the printer is making art makes me less frustrated when things go wrong. like oops sorry man didn’t know you wanted to pop out some sculpture practice today, lmk when you’re done
Art teachers belike: this shows how our society will disagree with our beliefs if they conflict with theirs, which explains the beheaded birdlike shape and its pink color.
You’re obviously wrong. I think the pink color gives a nice pop to the art piece. It represents the artists happiness that is being held back by the norms of society. It conveys the artists longing for freedom. The artist is bold but also boring, these are the messages this art piece is showing.
@@MihaiDesigns both of my anycubic printers have been going through their experimental "artistic" phase lately. But somtimes they bou just say to hell with it and dont do anything at all
that "oo special touch" combined with the cracking and wobbling of the material while the printer is just STRUGGLING is the funniest thing I've seen today. represents my life perfectly.
You have a really charming voice and sense of humor! I believe this is the first video of yours I was shown while browsing shorts a few months ago, and it made me subscribe for more of that kind of content. Cheers!
I went looking to see if you had any non-adhd videos, and you have a few. They were really enjoyable. I'd love to see more long form videos from you about this stuff.
@@MihaiDesigns this makes me wonder if you could put your heat sink fan on your xaxis end then put a telescoping fan duct (might reduce weight of the x carriage) while using a larger fan. :) Might not work. But interesting idea. 🤔
I saw the whole video years ago and struggled to find it, but then re-thought of this again and googled "3d printer is an artist" and bam! Thank god for your short.
I love your mood about a fail print. I don’t necessarily share your good nature about it, but you give me hope that I can be as ok with it as you are someday!
i love how they are proud of their printer instead of getting mad, its so wholesome n makes me think of the person as the printers adult figure n the printer is the kid whos trying its best
I loved the fact that while you were obviously not the happiest with the fail, it wasn’t like completely anger or rage over the waste of time and material like most would.
I thought that was what he originally intended to print but only slightly different BUT then he threw it away and I was shook. The fan duct makes sooo much more sense
"my printer is an artist" made me genuinly laugh out loud.
I died 😭 too 🤣
"Art does not apologize"
Me to lmao
Laughed so hard the first time I heard it, played it a second time just to end up breathing in my soda
But did you genuinely laugh out loud...
Printer: "No, no. You see, this is an abstract representation of society and..."
My English teacher would make me do a 5000 word essay about this if the printer could talk. Thank goodness.
Of an industrial society and its future
Real work of art
yes i think i see it now
Thats the only appropriate response to a misprint "i'm printing *something* pink 😋"
👁️👄👁️ That emoji on the last sentence.
@@His_scars its just his favourite colour😋
@@His_scars
It makes me wanna die, but _maybe_ in a good way?
@@Founderschannel123 it is
@@His_scars 😋😋😋😋😘
"special touch" with a delicate and graceful stroke LOL
More like spacial touch
😅
Stroke is the right word here
You've no idea how much I needed to see this after many a failed print, especially since you and marsgizmo were the reason I'm getting into 3d printing
Same, my very first print turned out like this actually and was devastated. Glad to see that it can happen to anyone
"Ooooo special touch!" Been there 😂 happens to everyone
@@Dragonrealms245 Hey I'm not into 3d printing or anything but just wanted to say that nobody is perfect and they just show the best results so of course it can happen to anyone! So don't be devastated! :)
@@Zahara-y5q 🤤
I had to take a break from printing many a time because I would be attempting a project and had gone through multiple hour or more failed prints. It's soul crushing.
I love how you acted so positive to a printing bug, it’s super supportive and I love that positive attitude!
First thought, looks like the Witch hat 😂
Wonderful fail! 😎
Isn’t this youtuber copying your video style
@@m1dos391 he's my brother ;)
@@marsgizmo ohhhhhh, makes sense then
@@marsgizmo no way
Please stop all of this is making me want a 3d printer
I like how instead of rage or frustration from the lost time, resources, and failure, they made something fun and cute out of the situation and kept calm. Honestly a great work of art from your printer
"No power, 'cause there's a *Storm* ."
Truly great line.
A new gru is in town
Love that line
"A storm is coming for us all"
Coz dere iza storm
I love the way he said it😃
"Every act of creation is first act of destruction"
- 3D PrintCasso
"I'm printing something pink." He said it so calm and sweet, while other people might've went furious about this printer. 😅
Yeah I was printing a sword…and I had just of enough filament for the last peice and it failed right at the end…just leaving a big glob…I was definitely furious
the idea that the printer is making art makes me less frustrated when things go wrong. like oops sorry man didn’t know you wanted to pop out some sculpture practice today, lmk when you’re done
Art teachers belike: this shows how our society will disagree with our beliefs if they conflict with theirs, which explains the beheaded birdlike shape and its pink color.
🤣🤣🤣 👍
Yup, just pure waffle, brilliant!😂😂
You’re obviously wrong. I think the pink color gives a nice pop to the art piece. It represents the artists happiness that is being held back by the norms of society. It conveys the artists longing for freedom. The artist is bold but also boring, these are the messages this art piece is showing.
@@Alexis-go5cd very interesting, a good interpretation of the piece.
@@Alexis-go5cd No pink means gay, he's gay
finally, someone who lets their 3d printer to be able to express themselves, more people out there should be more like you tbh
If that’s what you call an artist than my printer has to be the most famous artist lol
Mine is just starting. Takes time and experimentation to develop a true artistic sense.
Then*
@@MihaiDesigns both of my anycubic printers have been going through their experimental "artistic" phase lately. But somtimes they bou just say to hell with it and dont do anything at all
Sheesh in that case my school has 7 unique artists in the fabrication lab
My ender 3 v2 is a minimalist
On a serious note, I'm going to send it back, because I think I got a bad model. Lest there's anyone who can assist?
As an artist, I thoroughly appreciate this
Your printer has been temporarily possessed by Salvador Dali.
😂
sounds like a cool writing prompt
@jacksuntrie how the Frick do you NOT know who Salvador Dali is?!?!?!
@jacksuntrie one of the most influential surrealism artists
I was thinking escher or ernst but that works too lol
that "oo special touch" combined with the cracking and wobbling of the material while the printer is just STRUGGLING is the funniest thing I've seen today. represents my life perfectly.
The special touch really got me.
Lmao same especially as the sculptor wiggles a little
You have a really charming voice and sense of humor! I believe this is the first video of yours I was shown while browsing shorts a few months ago, and it made me subscribe for more of that kind of content. Cheers!
This dude has the most calming voice like he could be a golf commentator with that voice.
I don’t know why but that’s adorable. “My printer is an artist” you sound like a proud parent
His voice is so soothing lmao
Thanks 😁
@@MihaiDesigns you sound like Gru from Despicable Me
"I'm printing something pInk!" sounds so pleasant. Kudos to him for making light of the everyday woes of 3D printing :)
@@frosty554 Dr. Doofinshmirtz for me 😂
@@kibasuper1292 ong
I’m happy that you’re supportive of your 3D printer’s art ☺️ Even technical equipment needs to have fun every now and again
Hey make sure to get a whole house surge protector to make sure you don’t fry the printers!!
Yup, got it.
Your humor cheered me up! Love your optimistic take on the situation 🙂
Glad you liked it!
OMG that "special touch" hurts😂😂😂😂😂
That belongs in a museum
I bet if you scale it up and auction it some rich dude will buy it and say “Ya I’m so elite I bought this exquisite sculpture”
I like how you just let it keep going. Printer you doing amazing!
This funnel looks evil. In the sense that it's back pressure is pretty high, it might not let through much air.
Very inefficient, but does the job of temporarily cooling down a small print without freezing the bed.
@@MihaiDesigns Nylon printing, are we?
“I’m printing something pink!”
This is so cute. 🥰
I started laughing at "ooooh special touch" and didnt stop for 3 whole replays.
I love your accent and how you say “there, very pink”
I went looking to see if you had any non-adhd videos, and you have a few. They were really enjoyable. I'd love to see more long form videos from you about this stuff.
I know! I'm trying to free up time for that.
Best short I've ever seen omg I love this
The 3D printer owning experience :))))
😂 indeed
Fail, but keep failing. You always have next time to perfection :]
@@EvilNeonETC As far as my first 3D printer knows, when im away CLOG THE HOTEND
@@joejia1410 QUICK WHILE HE'S NOT LOOKING
@@EvilNeonETC Meanwhile me doing other things: Hey whats that burning smel- OH CRAP
The way he said "And only 58 minutes." In a soft and calm way 😂
this guy is hilarious idk why but I laugh randomly at whatever he says
"I'm printing something pink :D" he sounded so happy!
Sometimes prints fail in the most spectacular ways! :D
So true!
@@MihaiDesigns this makes me wonder if you could put your heat sink fan on your xaxis end then put a telescoping fan duct (might reduce weight of the x carriage) while using a larger fan. :) Might not work. But interesting idea. 🤔
I saw the whole video years ago and struggled to find it, but then re-thought of this again and googled "3d printer is an artist" and bam! Thank god for your short.
“No power *cause there’s a storm!!* ”
I feel that as I live in Florida 😪
Yeah its been hella rainy down here these past few weeks hasnt it.
When the printer goes on a rebellious phase and does it’s own thing.
Bahaha! I seriously think you may be my favorite personality on the Tube of Yous. 🙃
Yay! Thank you!
@@MihaiDesigns Hey, thank YOU for brightening my days with your quirky view of life. Don't change, brother. 💜🤘🏼✌🏽
When you called it an artist so nonchalantly
I felt that
Art teachers be like: this shows the industrial society and its futures
“Oooh incredible attention to detail!” 😂
I'm sorry but your voice makes you sound like a lovable cartoon villain lol. I love it!😄
The way he says "ooOooOoOoOO special touch" gets me every time
My guy sounds like dr. Dofenshmirtz 😂
The sarcasm in that “but my printer is an artist” is gold 🤣
Damn man… even if you mess up it looks better than anything I print 😅
I love it when I go for a walk and come back to see my 3D printer doing random stuff.
"But my printer's an artist" 😂
The “uuu special touch” made me cackle.
Why is the robot touchibng it like that 😭
I was picturing it a bit differently but my printer is an artist 👨🎨
Words of a true legend
“Ooo special touch :0” I love how he said this😂
Printer: god what am I doing this looks like shit
Him: THIS IS ART!!!
This short had more relatable moments than most RUclipsrs in their entire channel, and I don't even own a 3d printer!
Still beter than modern art!
This mans just screams happy energy
i bid $1.5M for that work of art
Loving that you’re so optimistic
Keep it up!!!
If someday robots take over the world and said humans are dumb then show them this
The “ oooh special touch” had me haha 😂
The “OooOO special touch 🙃” gets me
To be honest, that misprint genuinely looks like something that could be in a modern art museum
I want that mans optimisim. Like i legit need to hold myself from brakeing my mashine each time this happenes.
The soft “very pink” makes me happy
I love your mood about a fail print. I don’t necessarily share your good nature about it, but you give me hope that I can be as ok with it as you are someday!
This is so wholesome in an incredibly indescribable way
Beautiful attention to detail
I love your frustration at the storm. Your accent really pops XD
"oooh, special touch" 🤣🤣 Literally my most hated sound from my printer made hilarious!
I love how chill he is about this, he ain’t mad
I luv how calm they're voice is
I hope the 3D printer has a successful career in art sometime in the future
i love how they are proud of their printer instead of getting mad, its so wholesome n makes me think of the person as the printers adult figure n the printer is the kid whos trying its best
Everything that get out of this guy's mouth is iconic!
When you can take a hit and pull humor out of even the most enraging results means you're worthy of a chad title
U are a comedic genius i love this!!
of all the shorts I've seen, this is by far the best! here, you dropped this - >👑
The “oOOooO~ special touch” got me 😂😂😂😂😂
I keep coming back to this video. It’s perfect.
Printer: "Yeah it's a neat design but here's how I would do it"
I loved the fact that while you were obviously not the happiest with the fail, it wasn’t like completely anger or rage over the waste of time and material like most would.
"Ooo special touch!" while it's malfunctioning and destroying itself 🤣
"Very pink"
Lmao 🤣
I’m literally dying why is this SO FUNNY🤣 I loved your vids, but I didn’t know you were a comedian ❤️❤️❤️
I love this guys accent it makes the video so much better
This is the best thing I’ve seen all day🤣🤣🤣
I *really*think he should go with the first one! It’s sooo good, and you’re right, your printer is the best artist in the world.
"Your printer is an artist"! Had me laughing so hard! The part when you said " oh special touch " had me on the floor laughing! You are hilarious!
"You see that Cleetus? It's a pink traffic cone."
"WELL GOOOLLYYY!! HIT THE BRAKES, HUFORD!"
I love your attitude towards it
I thought that was what he originally intended to print but only slightly different
BUT then he threw it away and I was shook. The fan duct makes sooo much more sense
Thank you for making this video it brings me great joy
I thought only my printer does this. If an expert like you face this issue, I’m not as devastated as earlier.
I love how calm he is with this whenever this happens to me I give my printer a spanking