I wrecked the display. A new one now can be found around 10€ with shipping, which is reasonable. I need to know if and how the broken display can be removed (is heating enough?). And how the new one can be installed. But somewhat watertight! Is the adesive glue included? PS: I can add for everyone, that glass removal was ok. A bit scary to heat up the band.. Glass splinter are also complicated. I had to remove all lose parts before using the hairdryer again. Also the tiny lever to free up the display was not easy to understand at first.
late response but: heating is enough to remove the screen without any permanent damage. when attaching new screen, use glue that's elastic and liquifies under heat (NOT superglue / cyanoacrylate), like B7000. it'll also serve as watertight-ening.
@@TomaszStachewicz well, I tried just now.. I was able to remove the glass. I heated all up with a hairdryer. But was still hard to remoe as the glass was shatterd and broke to pieces. I didn't want to heat up too much. So: In the end I managed to remove the display removing the sticker end lifting the lever. However, after installing the new display the band won't boot up! 😞 I discharged the battery before, to avoid any damage. But now it's non charging/switching on. Waiting already a few minutes. I fear everything got too hot! without any knowledge about max temp. and/or profesional heating system this operations is a bit risky.. well, at least I tried!
@@mirkosch926 I did this repair three times, most recently on a Mi Band 7 (hence finding this video and the comment) and never had issues. But I used a temperature-controller hot air station and stayed under 100 degrees Celsius to avoid damaging battery or any electronics inside.
Thanks for the video! I've a new Mi band 7 that has software issue. When switched on (via charger) it shows QR code to install Mi Fitness app. But then the band was unable to pair and a pop out message told me to reset the band of which I cant bcos the band's screen unable to respond to swipe, taps or long press. I've contacted Xioami Global support service & they refused to assist me further. The seller where I bought the band didnt respond to my inquiries. The band is legit original though. What do you think I should do? Thanks in advance.
I want to know if it is the current update since the last one, that is, version 2.0.04, does not let me update my bracelet, it cannot progress more than 10 percent, then it turns off and an error message appears in the update
Hello, thank you very much for the video, I told you that I was able to change the screen but it gave me a problem to link the bracelet with the app, it tells me that I should factory reset the bracelet, but it won't let me because the bracelet was left with an image of QR to download the Mi Fitnes app. Please help, I can't send you images here to explain better.
hola muchas gracias por el video, te comento que logre cambiar la pantalla pero me arrojo un problema para vincular la pulsera con la app, me indica q debo restablecer de fabrica la pulsera, pero no me deja por q la pulsera quedo pegada con una imagen de QR para descargar la app Mi Fitnes. ayuda por favor, no te puedo enviar imagenes por aqui para explcar mejor.
Me pasó lo mismo con mi ban 7 tube que comprar la 8 y está ya fayo Alos 4 meses xque ya no meda lo de un sensor que todo los latidos oxígenos etc...solo meda pasos y distancia
Mi band 7 interface is laggy i hope they release a good update fixing the lag very soon please like my message so that everyone knows about this issue. I recently bought mi band 7 on 1st october and my laggy interface is making me regret that why i bought it
What kind of an idiotic question is that?! Completely different size, completely different shape, completely different resolution, completely different EVERYTHING!!!
@@Stephen._.Chapman I was wondering this for science and science only. You can connect some display panels to hardware with it sticking out and they still output. I am aware that they are completely different size and resolution.
I have 3 Mi Bands, two 6's and one 7. The 7 lasted six weeks before failing. One of the 6's lasted a year. I'm done buying Mi Bands. They are unreliable and the app sucks. Junk.
![Ice On My Teeth - ATEEZ エイティーズ 에이티즈 [Music Bank] | KBS WORLD TV 241115](http://i.ytimg.com/vi/c-n92OgbbwA/mqdefault.jpg)
hi, sorry for the question, you glue the display or use double-sided tape
Glue
I wrecked the display. A new one now can be found around 10€ with shipping, which is reasonable. I need to know if and how the broken display can be removed (is heating enough?). And how the new one can be installed. But somewhat watertight! Is the adesive glue included?
PS: I can add for everyone, that glass removal was ok. A bit scary to heat up the band.. Glass splinter are also complicated. I had to remove all lose parts before using the hairdryer again.
Also the tiny lever to free up the display was not easy to understand at first.
It is going to be a tough job and I don’t think it can keep original band standards after the replacement
I just got my Mi Band 8 tody, but yet.. I'm really tempted to try! @@DIYGeardo
late response but: heating is enough to remove the screen without any permanent damage. when attaching new screen, use glue that's elastic and liquifies under heat (NOT superglue / cyanoacrylate), like B7000. it'll also serve as watertight-ening.
@@TomaszStachewicz well, I tried just now..
I was able to remove the glass. I heated all up with a hairdryer.
But was still hard to remoe as the glass was shatterd and broke to pieces.
I didn't want to heat up too much.
So: In the end I managed to remove the display removing the sticker end lifting the lever.
However, after installing the new display the band won't boot up! 😞
I discharged the battery before, to avoid any damage.
But now it's non charging/switching on. Waiting already a few minutes.
I fear everything got too hot!
without any knowledge about max temp. and/or profesional heating system this operations is a bit risky..
well, at least I tried!
@@mirkosch926 I did this repair three times, most recently on a Mi Band 7 (hence finding this video and the comment) and never had issues. But I used a temperature-controller hot air station and stayed under 100 degrees Celsius to avoid damaging battery or any electronics inside.
But how to put it back together and keep water reststance
Not possible
Disassembly using heat (no knife) like from hot air station, assembly using glue like B7000.
Is there any pictures of the board? I'm looking for the cpu/soc part number.
Sorry not have now
Was its water resistance compromised with the way you remove the screen?
After removal, of course yes. It won’t be safe with the water
Mi band 7 have a small hole in the bottom, wondering what purpose of it?
It can be opened without destroying the case. The flexible cable of the screen does not pull up. You need to pull in a plane.
Thanks for the video! I've a new Mi band 7 that has software issue. When switched on (via charger) it shows QR code to install Mi Fitness app. But then the band was unable to pair and a pop out message told me to reset the band of which I cant bcos the band's screen unable to respond to swipe, taps or long press.
I've contacted Xioami Global support service & they refused to assist me further. The seller where I bought the band didnt respond to my inquiries. The band is legit original though. What do you think I should do? Thanks in advance.
Hello, What substance was used in the spray can when peeling off the display?
Isopropyl alcohol
I want to know if it is the current update since the last one, that is, version 2.0.04, does not let me update my bracelet, it cannot progress more than 10 percent, then it turns off and an error message appears in the update
How about resetting your device to factor
Well, its not worth it to repair.
Thanks for the video! Loved to see all the semiconductors and baby battery.
Mi bands are not worth for a repair
I Have mi band 7 due to falling the screen is broken how can I buy new screen in India with cheap price
Aliexpress, 10-13 USD
Hello, thank you very much for the video, I told you that I was able to change the screen but it gave me a problem to link the bracelet with the app, it tells me that I should factory reset the bracelet, but it won't let me because the bracelet was left with an image of QR to download the Mi Fitnes app. Please help, I can't send you images here to explain better.
Ho lo stesso problema. Come si può risolvere? Il codice QR non permette l'orologio di collegarsi all' applicazione
hola muchas gracias por el video, te comento que logre cambiar la pantalla pero me arrojo un problema para vincular la pulsera con la app, me indica q debo restablecer de fabrica la pulsera, pero no me deja por q la pulsera quedo pegada con una imagen de QR para descargar la app Mi Fitnes. ayuda por favor, no te puedo enviar imagenes por aqui para explcar mejor.
Me pasó lo mismo con mi ban 7 tube que comprar la 8 y está ya fayo Alos 4 meses xque ya no meda lo de un sensor que todo los latidos oxígenos etc...solo meda pasos y distancia
Benerinya dmn bang,apakah dikonter bisa?
I am not sure.
the battery can’t be separated from the board?
Can, But little hard
@@DIYGeardo why hard? also, got 2 wires… got positive and negative?
Mi band 7 interface is laggy i hope they release a good update fixing the lag very soon please like my message so that everyone knows about this issue. I recently bought mi band 7 on 1st october and my laggy interface is making me regret that why i bought it
Thanks for your feedback.
@@DIYGeardo sure bro
me pasa lo mismo, va lenta la interfaz y no sincroniza los datos con el móvil, además, ya no mide nada de nada 😭, llevo apenas tres meses con ella
Try restarting it
They finally fix it with... release band 8)
Can you connect Mi Band Pro display to a Mi Band 7?
No
What kind of an idiotic question is that?! Completely different size, completely different shape, completely different resolution, completely different EVERYTHING!!!
@@Stephen._.Chapman I was wondering this for science and science only. You can connect some display panels to hardware with it sticking out and they still output. I am aware that they are completely different size and resolution.
Berapa harga mi band 7?
in China ，about 30dollars😊
@@mecer9132 thanks 👍
Globally about $50
Plz make a teardown of mi band 7 pro
Will try thanks
would have been great if there was a voice over. It becomes quite hard to follow through without voice
More than repair guide this is a teardown. It is quite complicated to get a mi band get repaired
Mi band 8, please!
Will try thanks
@@DIYGeardo Yeah, I'm interested as well.
Berapa diameter baterai ?
Sorry not sure,
I want you teardown Amazfit bip 3 pro. 🙏🙏🙏
Will try, thanks
@@DIYGeardo 👍👍👍
I have 3 Mi Bands, two 6's and one 7. The 7 lasted six weeks before failing. One of the 6's lasted a year. I'm done buying Mi Bands. They are unreliable and the app sucks. Junk.
Thanks for sharing
Mi band poor quality
I have 1 band 5
2 band 6
In one all broke
And it always LCD
What do you usually do?
Omg!
Thanks for your feedback
mi band 7 pro
Will try
😡😡😡
Hola
HI
Mi Band 7 sofreu coitada
Thanks
টাকা তো তোমার বেশি হয়ে গেছে এই কারণে ৪৭০০ টাকার জিনিস
Thanks for your feedback