Great video! i replace the battery and had to replace front camera due accidentally i damaged camera sensor cable while it felt and tore the cable. this video was very helpful. Thanks a lot.🙏🙏
The reason you are getting a black screen or phone won't turn on is because the battery connector wasn't disconnected (video doesn't show him disconnecting it) and you probably shorted out the logic board. The battery should always be disconnected when working on any devices like cell phones and tablets.
So I have a question I want to buy a used iPhone 8 but the front camera is non working if I replace the front camera will the touch id and home button still work because I changed the screen on my iphone 7 and it had a front camera already on it and the home button stopped working so I had to put the old camera but on it
Hi! I have problems with my iPhone 8, i accidently ripped off ribbon cable of front cam and proximity sensor. Lcd cables are intact, but when i try to boot the phone, it boots but nothing shows on the screen. Is the front cam and proximity sensor necessary for image on display?
@@cristobalfloresdaccarett6045 hello, yes i fixed the problem. lcd was damaged. i bought and installed new one and it works. front cam and proximity sensor is not needed to boot the phone
this is a later reply but if you replace the screen, doesnt matter if it's apple original or not the true tone will go, unless you buy a programmer and copy the serial number from the old screen and paste it on the new screen so the phone thinks it has the original screen and the true tone wont go away
the camera flex cable is not seated into the logic board correctly or it is misaligned so the camera is pressed against the screen instead of the hole where it should be.
either you havent plugged the front camera in properly or you broke the connector, double check the connection, if it doesnt work still try another camera, if it still doesnt work then it's probably a logic board problem
I did this and my phone wont work now. Only sign of life is when I plug it in, then the apple logo comes on for a few seconds and turns off for a few seconds and repeats this.
Mine did this too (turned off and on). I discovered that I had connected the ribbon cable in upside down on the battery side. The ribbon cable should point down toward the bottom of the phone at the connection.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Shouldn’t u disconnect the battery first
Great video! i replace the battery and had to replace front camera due accidentally i damaged camera sensor cable while it felt and tore the cable. this video was very helpful. Thanks a lot.🙏🙏
Same thing just happened to me while fitting in a new battery 😂
Same😭
Bro will broken of sensor cable cause touch problem please reply
Actually I broked my flex cabel and now touch not working
The reason you are getting a black screen or phone won't turn on is because the battery connector wasn't disconnected (video doesn't show him disconnecting it) and you probably shorted out the logic board. The battery should always be disconnected when working on any devices like cell phones and tablets.
This removes true tone is there a way of returning true tone?
So I have a question I want to buy a used iPhone 8 but the front camera is non working if I replace the front camera will the touch id and home button still work because I changed the screen on my iphone 7 and it had a front camera already on it and the home button stopped working so I had to put the old camera but on it
Auto brightness not working. How to fix it?
thanks! Best video!
Excellent ! Thank you very much !!
Thank you for this! It was a big help!!!
Hi! I have problems with my iPhone 8, i accidently ripped off ribbon cable of front cam and proximity sensor. Lcd cables are intact, but when i try to boot the phone, it boots but nothing shows on the screen. Is the front cam and proximity sensor necessary for image on display?
Hello I'm having this same problem, once you fixed the camera cable did it work?
@@cristobalfloresdaccarett6045 hello, yes i fixed the problem. lcd was damaged. i bought and installed new one and it works. front cam and proximity sensor is not needed to boot the phone
Super easy - 5min thank you
Does the true tone gone after changing the camera
depends on the screen you replace the iphone with if its OEM of not
Yes my true tone is gone my screen is original please tell me how to recover it .
Please please please
this is a later reply but if you replace the screen, doesnt matter if it's apple original or not the true tone will go, unless you buy a programmer and copy the serial number from the old screen and paste it on the new screen so the phone thinks it has the original screen and the true tone wont go away
I did exactly what you did power the phone on front camera black what do I do
the camera flex cable is not seated into the logic board correctly or it is misaligned so the camera is pressed against the screen instead of the hole where it should be.
u broke the cable good one
either you havent plugged the front camera in properly or you broke the connector, double check the connection, if it doesnt work still try another camera, if it still doesnt work then it's probably a logic board problem
Where to get the screw drivers and other tools
Here is a link to a nice quality set ebay.to/2QxcWg9 and here is a more affordable one with all the tools needed ebay.to/2OsiEig
Can use your phone and speaker with out cameras. We need phone without cameras at our workplace.
Iphone 7 and iphone 8 front camera strips are same ???
Thanks, from Brasil!
What is the last removed sensor for ?
when you call people and the screen turns off, thats what the sensor does
Is the 8 front facing camera harness the same as the iPhone 8 plus?
Thanks
Video of go ahead
Hahahaha 🤣
Go ahead...
And go ahead.
I did this and my phone wont work now. Only sign of life is when I plug it in, then the apple logo comes on for a few seconds and turns off for a few seconds and repeats this.
Ian Conery press volume up, volume down, then hold the side button for 20-30 seconds
I don't know if u still have this problem but if u disconnect the flex cable and power the phone on it will work just replace the flex cable
Mine did this too (turned off and on). I discovered that I had connected the ribbon cable in upside down on the battery side. The ribbon cable should point down toward the bottom of the phone at the connection.
The flex camera is not good replace it and the phone gonna Turn on normaly
thanks