Thank you very much for the detail replacement procedure. I used hair dryer to heat up the back cover. Once the cover surface feel little bit hot, I ply the cover corner with my finger nail quite to open up little bit, then insert the hard plastic to carefully slided along the edges around and managed to open the cover, surprising easier than I thought. I then took out the screws but only 1st 4 or 5 screws, not 10, just enough so that I can lift up the black metal a bit and take out the small piece of metal (tightened by the 1st and 2nd screws) covering the battery and finger sensor connectors. And the replaced the battery. Thank you again.
Hi great video!!! I have a little question that i hope you could answer. I've been reseraching for hours. My p30 lite glass back has shattered, and i wanted to replace it. But i have seen that in most of the tutorials the take the sim card trays off before replacing it. Does that affect the process? Mine has been stuck for months because i got a pin really stuck in it. (almost sealed tight) If i go to a phone repair shop would they be able to replace the back and free the sim tray hole? (without any complications and without being too expensive) How would you guys approach this?
It is not necessary for this model.But for some models you have to.But as a good practise removing is better. They should able to do it easily.they need to take out the logic board and free the sim tray hole. But if you have damaged the sim hole, then you might need to replace the frame or holder. Just tell them my sim is stuck, just make it free ruclips.net/video/fDRuOCKzyUA/видео.html
Important question, is it safe to cut the tail of the old lituum battery? I'm replacing my battery but the screw is already stripped, so I plan to forcely remove the metal thingy above the connector of battery. Then while forcing to remove the metal thingy I see some sparks even if the phone is off, so I plan to remove the battery power by cutting the tail.
exactly. The only added value of having sound turned ON in this video, is to listen to that generic music. I doubt anyone outside from India can catch more than 10% of words he humbled..
![Megan Thee Stallion - Mamushi (Remix) [feat. TWICE] [Official Audio]](http://i.ytimg.com/vi/5c0_u9PsrsQ/mqdefault.jpg)
Thank you very much for the detail replacement procedure. I used hair dryer to heat up the back cover. Once the cover surface feel little bit hot, I ply the cover corner with my finger nail quite to open up little bit, then insert the hard plastic to carefully slided along the edges around and managed to open the cover, surprising easier than I thought. I then took out the screws but only 1st 4 or 5 screws, not 10, just enough so that I can lift up the black metal a bit and take out the small piece of metal (tightened by the 1st and 2nd screws) covering the battery and finger sensor connectors. And the replaced the battery. Thank you again.
You should watch some of the other videos for this, they only remove TWO screws and it is quicker and easier
Thanks for your feedback
Magnifying the tiny details/ parts, like screws, cords would help. Otherwise, it is great. I am a couple years away.
Thank you.
Thanks for your feedback
Hi great video!!! I have a little question that i hope you could answer. I've been reseraching for hours. My p30 lite glass back has shattered, and i wanted to replace it. But i have seen that in most of the tutorials the take the sim card trays off before replacing it. Does that affect the process?
Mine has been stuck for months because i got a pin really stuck in it. (almost sealed tight)
If i go to a phone repair shop would they be able to replace the back and free the sim tray hole? (without any complications and without being too expensive)
How would you guys approach this?
It is not necessary for this model.But for some models you have to.But as a good practise removing is better.
They should able to do it easily.they need to take out the logic board and free the sim tray hole. But if you have damaged the sim hole, then you might need to replace the frame or holder.
Just tell them my sim is stuck, just make it free
ruclips.net/video/fDRuOCKzyUA/видео.html
@@DIYGeardo Thank you for your the explanation and suggestion. Great channel and content. Very helpful.
Important question, is it safe to cut the tail of the old lituum battery?
I'm replacing my battery but the screw is already stripped, so I plan to forcely remove the metal thingy above the connector of battery.
Then while forcing to remove the metal thingy I see some sparks even if the phone is off, so I plan to remove the battery power by cutting the tail.
It is not safe to do such a thing if you don’t know what you are doing exactly. My advice is to seek a technician
Thx for your video! It helps me a lot
Glad to hear that!
And don't forget cleaning cameras glasses lens 😊
Yes
i changed the battery recently abut the phone is stuck on the huawei start logo
can you go to safe mode?
@@DIYGeardo no not at all, only the "huwaie logo" and then restart and again and again
@@DIYGeardo I read somewhere that the old battery is paired with motherboard and the new battery need to be paired also
I changed my battery but still my charge is draining so fast 😥
Probably with your board. Have you try a reset?
ভাই আমার ফোনে মাইকে সবকিছুই ঠিক আছে কিন্তুু ছাওন আস্তে আস্তে কোমে যায় কিছু বুঝতে পারছি না
Why is it so difficult???
Compare to others, this is not that bad
English plizzzzzz
🙄
exactly. The only added value of having sound turned ON in this video, is to listen to that generic music. I doubt anyone outside from India can catch more than 10% of words he humbled..
What kind of screw driver you used and the glue?
Mostly + (Philips) and b7000 glue
@@DIYGeardo oh you use a regular Phillips screwdriver? Thanks man!