What a surprise! For me this has to be the most anticipated dyno,s of the year, I asked D to dyno AD before and was told no because they dyno there amps them selves, but now you see why I was so excited to see you pull the trigger on this amp thank you!
Sheeeesh lmao excellent best dyno channel out there straight to the point no hype just number doubt this guy has ear drums very hard to please or get a shocked reaction his personal vehicle will send you to the e.r keep em coming
JJS what is the standard hz measure for the amp dyno? 🤔 Only asking because im not sure if a amp is rated at a lower hz (say like 25hz) would dyno more than it's rated power at a higher rating. Ex this amp is 35hz. Do you believe the outcome would be different at say 25hz? Also the fuse rating is 1100. Whats your take on fuse ratings? Ive seen dynos of amps with 25hz and a 1000 amp fuse rating. So im asking if you can for a little help understanding this principle
The industry standard is 40hz for subwoofer amp testing, and 1khz for full range amp testing. Certified is run with either 40hz or 1khz only. Uncertified testing can be run as low as 25hz, and as high as 10khz, the test disc has 9 tracks I can choose from that step up incrementally. Dynamic is a 40hz pulse tone. In my opinion the 40hz area is the best area for subwoofer amp testing, I would be surprised to see an amp produce more power at a lower frequency, although the opposite is often true - 60hz may score higher than 40hz for example. I run fuseless on the bench, just to eliminate variables, but typically fuse ratings are based on an amps maximum draw at any given frequency without prejudice. You won't see a fuse rating that is lower than what the amp can continuously draw at any time or scenario, always slightly above.
Im not putting this amp down in no way shape or form. It is a beast. But you can get 2 jp83s for $3,000 and just strap them. It will have more power and is cheaper. Just saying
I hope I see close to rated, just bought it before I seen this dyno, now nervous cause I’m sure my voltage isn’t going to stay at almost 15. I have a 320 Alt and using two limitless pro 56’s. We shall see
@@ddaudio9512K haven’t got it all hooked up yet, the shop I work at has a few more vehicles to do before they can jump on mine. Shit, you should be damn fine for sure.
@@ddaudio9512K no sir, but we have installed some of their smaller amps, and they did very well, so that gave me hope on the big boy, I have one guy that I trust to touch my vehicle, he is trying to catch up so he can get on mine. Patience is killing me 😂
@@Facekicker I don't know what I was thinking when posted that. I guess I was thinking connecting the channels (on the Dyno) I thought in others dunno vids they jumped the channels or something but I'll have to go look.
Price isnt that bad. Same price as a Pittbull. Sundow 12k way more. When I get tired of my Crossfire i may switch. I still waiting to see a Crossfire XT8. I think your fairly close to me. Drive over and get it 😂
Ad is expensive....nothing earth shattering or new but I bet they are great performers but price is crazy on their smaller amps...about a 1000 cheaper than a salt 12 though...lol
@@sgtJOOSEcapeS he knows he's broke... I keep telling kids in the Audio click that if you can't afford to play with the big boys you don't get to bitch and complain... you get to play with the children
All I can say is wow. And all I've seen is people complaining about price. This is definitely one of those you get what you pay for deals!
What a surprise! For me this has to be the most anticipated dyno,s of the year, I asked D to dyno AD before and was told no because they dyno there amps them selves, but now you see why I was so excited to see you pull the trigger on this amp thank you!
Right on!
The is hands down the amp dyno video of the year.
My friend is about to use 3 of these on 6 of the AD 15's in his van build
Wow!! Unbelievable how nice and powerful that amplifier is!!🎉
Heck yeah man. Starting the day off right. Thank you sir.
Enjoy!
No bass boost! Ahhh a dream amp! Only amp close in my opinion is Synergy as in build quality amd no bass boost! I love it.
Sheeeesh lmao excellent best dyno channel out there straight to the point no hype just number doubt this guy has ear drums very hard to please or get a shocked reaction his personal vehicle will send you to the e.r keep em coming
Nice video well organized as usual👍🏾
Thank you!
Good, I just got one, I’m putting on 3 12” Sundown ZV6’s. 1.33 ohm load. Can’t wait
Great video, amazing amp👍🏼👍🏼
WOW that amp is powerful.
Please take a measurement of the DD audio Z12000 amplifier
I'll try
JJS what is the standard hz measure for the amp dyno? 🤔 Only asking because im not sure if a amp is rated at a lower hz (say like 25hz) would dyno more than it's rated power at a higher rating. Ex this amp is 35hz. Do you believe the outcome would be different at say 25hz? Also the fuse rating is 1100. Whats your take on fuse ratings? Ive seen dynos of amps with 25hz and a 1000 amp fuse rating. So im asking if you can for a little help understanding this principle
The industry standard is 40hz for subwoofer amp testing, and 1khz for full range amp testing. Certified is run with either 40hz or 1khz only.
Uncertified testing can be run as low as 25hz, and as high as 10khz, the test disc has 9 tracks I can choose from that step up incrementally.
Dynamic is a 40hz pulse tone.
In my opinion the 40hz area is the best area for subwoofer amp testing, I would be surprised to see an amp produce more power at a lower frequency, although the opposite is often true - 60hz may score higher than 40hz for example.
I run fuseless on the bench, just to eliminate variables, but typically fuse ratings are based on an amps maximum draw at any given frequency without prejudice. You won't see a fuse rating that is lower than what the amp can continuously draw at any time or scenario, always slightly above.
@@Facekicker thanks
@@Mr.NpK143 Very welcome!
What a gorgeous monster tjat is!!
Agreed!
GODDAMN that’s impressive!!
Good Lord Above 😳 That is a BEAST 😈 👿
Im not putting this amp down in no way shape or form. It is a beast. But you can get 2 jp83s for $3,000 and just strap them. It will have more power and is cheaper. Just saying
Nice dyno.
Thanks!
I would love to see a American bass 500.1 on the dino
Dang thats crazyness
I hope I see close to rated, just bought it before I seen this dyno, now nervous cause I’m sure my voltage isn’t going to stay at almost 15. I have a 320 Alt and using two limitless pro 56’s. We shall see
Hey Bro how is the amp doing on your voltage I’m going to be running 2 56 myself along with 3 400 amp alternators
@@ddaudio9512K haven’t got it all hooked up yet, the shop I work at has a few more vehicles to do before they can jump on mine. Shit, you should be damn fine for sure.
@@LeonD519hey have you installed your 12k yet if so what are the results
@@ddaudio9512K no sir, but we have installed some of their smaller amps, and they did very well, so that gave me hope on the big boy, I have one guy that I trust to touch my vehicle, he is trying to catch up so he can get on mine. Patience is killing me 😂
👍👍👍...
Can you split the channels?
I can run dyno in stereo mode and put a mono amp on one channel, but it won't raise the dyno max limit.
@@Facekicker I don't know what I was thinking when posted that. I guess I was thinking connecting the channels (on the Dyno) I thought in others dunno vids they jumped the channels or something but I'll have to go look.
That's mental
That is a whole lot of power for only 8 toridial transformers and 2 amplifeir channels damn, I thought for sure it would be 4.
Price isnt that bad. Same price as a Pittbull. Sundow 12k way more. When I get tired of my Crossfire i may switch. I still waiting to see a Crossfire XT8. I think your fairly close to me. Drive over and get it 😂
Nice looking amp very pricey
Need to get tony to mod your dyno so it can go higher😂
he offers an upgrade pack and firmware
😮👍
She is Bad to the bone 👍
Omfg bro! How much is that amp? 5k$?
$3500
That's stupid power..if you can get your box rise in that target area.....man...your killing it..and then using multiple amps...ouch nice video J..
That amp a breast 💪💪🔊🔊💯💯
I like breast.
10k rms easy😅
? 12k easy
You need to update your firmware dude Tony D offers an update for the Resistors too
I reached out to him on this and got a "maybe". Still trying.
Ad is expensive....nothing earth shattering or new but I bet they are great performers but price is crazy on their smaller
amps...about a 1000 cheaper than a salt 12 though...lol
😂😂 just say you broke... Don't have to be dramatic with it 😂😂
@@sgtJOOSEcapeS I already have 2 surge 10ks dumb@$$...
whats the longevity on the AD's
@@sgtJOOSEcapeS he knows he's broke... I keep telling kids in the Audio click that if you can't afford to play with the big boys you don't get to bitch and complain... you get to play with the children
@@chuckholmes2075 My kenwood pushes 20x4 @ 4 ohms. She slams!
Its ok 😂
Most definitely not a salt 12 lol 😂
Explain, besides the salts low voltage part
Get ,4000 Dollars too
😳 WOW strap it'll be over 40k😂😂 geesuss Christ😂
Nice amp!!
Definitely!