I am impressed by his courage and tenacity. My grandfather always said not a lot to lose in this situation. Its not going to get any worse by trying to fix it.
Love your understated and dry sense of humour. Got me laughing quite often. Love your Sheppard how she checks in at the most appropriate moments possible when you're balancing a ton worth of motor or trying to move something that she figures she should help you with lol Great stuff. Can't wait to see this girl all fixed up and ready to dig :-)
Well impressed with your decision to tackle the control block. It definitely needed to be done. Cinematically impressed by the shot of you struggling to pull the block while the well sorted bulldozer shines in the background. Ive thoroughly enjoyed watching your skills develop.
I cant believe you dont have a million subscriptions. I love watching you work more that watching somebody getting their vehicle pulled out of the mud. Keep up the great work!
Another great video! I love that you aren't scared to tackle these massive projects, and that you're willing to take us along for the ride. You explain things well, have a methodical approach, and your sense of humor has really begun to show in your videos. Keep up the great work, and I'm looking forward to the D4 cold start video from your survey!
Great episode Matt. I liked when you mentioned that it actually took you week to get that far. That's good insight as to how much time you really spend on each subsystem. I not been exposed to heavy equipment so everything I have learned has been from your channel. Looking forward to the winter videos. Happy Holidays.
Well done, Matt! I've done similar tedious jobs with lots of electrical cables and used Panduit cable ties that have a white tab on the end that I can write on with a Sharpie.
This has got to be a labor of love for you. I'm SO impressed at your willingness to tackle the hard stuff. I can't wait to see this baby all cleaned up and purring like a kitten! I hope you have a hydraulic hose pressure testing rig set up so you can test all your new hoses before you put them back in. Staying tuned!
Electric motor is for the auto throttle function. Some machines have contacts on the joystick handles that speed the engine to the setting of the hand throttle position when you grip it and return to idle when released. Nice function for certain situations but not always needed. Libherr used it in the 80/90’s. Handles had gold rings around them that were the contacts. Make absolutely sure when making the 4/6 wire hoses with flange fittings that they’re aligned correctly before you crimp the opposite fitting. They don’t twist much and too much rotational pressure will cause the flanges to crack and break where they are welded. Not to mention you will have a hell of a time getting them connected. If possible you can crimp one end on and put it in place on the machine with the other fitting in place but not crimped to get the best fit then mark the fitting to the hose to get the proper position. Depending on the brand and type of hose and fittings you use you may have to skive the hose and you may need different dies for the crimper. 5000 psi hoses are more challenging than 3000 psi hoses for a dyi. Of course I haven’t made any 4/6 wire hoses in over 20 years now so I don’t know if anything has changed since then. I used Weatherhead brand then. Not familiar with any other but Parker 2 wire for the last 22 years. On the final drive motor the small hose is probably the brake release or a 2 speed function and the top is probably the case drain. Consult the hydraulic print if you have one. You can probably get a digital manual on eBay for the machine if you don’t already have one. At this point you should strip it on down and give it a good cleaning and fresh paint where needed. You should be able to disassemble the valve stack and clean and reseal it with no issues. Valve in back is for the thumb most likely. I enjoy watching and looking forward to the next show.
You are definitely a glutton for punishment ! What a huge , nasty job. To not mess with it in the winter is the smartest decision you have made. Keep up the good work thanks for bringing us along. You are an inspiration for sure.
It was obvious from the 'dozer series that Matt isn't one to shy away from big jobs... However, I'm mildly concerned about his NEXT project once this excavator is back to pristine... The +next_ is probably a nice 'simple' one such as building a track-loader from the ground up... (And when I say 'ground up', I mean that Matt will begin by creating an iron-ore processing plant to produce the steel that he needs). Impressive stuff sir... Keep up the good work!
The little valve under the boom is the crossover relief valve block. The blue electric valve back by the pumps would be for the thumb, generically called a DO3 valve.
You're the only channel I don't watch straight away, instead I wait until I'm settled and know I won't be interrupted, so I can relax and enjoy a delightful glimpse at a truly dedicated and knowledgeable craftsmen at work. It always makes me smile when you thank us for watching, I wouldn't miss it for anything.
Here is a trick when filming welding grinding paint ect.Use old trypod from light what have you.Place piece of window glass in front.Important :use zip car wash soap to wash glass 1shot glass to ice cream bucket soapy water.Dust particles ect will not stick to glass also nonscented baby wipes work great if you do need to clean in between shooting.Enjoying your series.
Nice work as always, here's a tip for hydraulic lines, if you have an air hammer hit the fitting on the line with the air hammer and it loosens them right up.
Bravo Mat...It is a HUGE undertake this "renovation".. Too many problems to solve but I'm confident, you'll successfuly finish it.. Many thanks for this video also...I hope we'll be able to see some other videos regarding the other pieces of it, like the motor or other parts during the winter.. Hope you to be well and to see your videos, soon again..
I always like to take things apart to see how they work, and i can usually get things back together. But this! Holy crap! what a complex system. I admire your ability to tackle this beast.
Matt, I think you did an outstanding job recording your disassembly. Seems to me to be a tedious task and to add cameras and video recorders is a whole added dimension. Although it does help in the reassembly process. Between the engine and hydraulic manifold, it should take a good bit of the winter to finish. I enjoy watching your videos.
Holly Smokes Matt! I was impressed with the D4 project. This is next level. If you actually manage to get this beast back together, you'll get the award for most complex project ever completed on RUclips.
Great job sir. As a millwright best long handle 1/2 inch drive ratchet for me has been Armstrong brand. Only one I ever needed after all the other crap ones. It was no stranger to a pipe snipe
As a child, when my parents wanted to shut me up they used to give me a bundle of string to untangle- I used to love it. With all those pipes I think you are definitely out of the same jar.😊
You are working like an old-fashioned millwright. Be glad it's not snowing ! Next step... 10 Gallons of de-greaser + a hot water pressure washer. You are going to end up with a good machine.
I do some little things and shudder at the thought of taking apart a pendulum clock, man the guts and courage to tackle that block is way beyond words. Thanx.
Great videos. Thanks for sharing. You're dedication to the depth of this rebuild is amazing...here's to your continued success. Merry Christmas & Happy New Year
And then Matt said "I'm feeling lazy" yeah, while were all sitting around with our feet up watching you bust your a**... Your a very hard working man, great video's and much respect sir!!
I've worked on some filthy trucks and boats before, but that thing is nasty! I hope it is more clear in person than on video, but that is a maze of hoses and paths they have to run to avoid damage. Wishing you all the best and admire your work ethic. What you need is about 3 or 4 old coots like me to be standing around giving you advice. That would really make it better!
Man, no need to apologize for not putting out a video that was supposed to be one thing, and then you end up with a different video…, I think we all just love getting to live this rebuild vicariously thru your work. Was great to hear some of the tools you are using, are handed down to you by your “gramps”… I am 60yrs young.., and ain’t got no “gramps” around no more (miss him everyday). Great video, Thank you sir.
I was exhausted by the end of this video. I just kept thinking “thank god I don’t have to figure out how to put that thing back together “. You are a work animal.
You have big cajoneies…..taking on this project! What a nightmare it’s gonna be matching those hoses up! Very brave ! The world is watching you…..don’t drop the ball!! Enjoy your vids.
PNW Hillbilly - The World's hardest-working nocturnal heavy equipment restorer!! And don't feel bad about the cold. I moved FROM Portland/Beaverton and this a.m. it was 7 degrees BEFORE the wind chill factor.
No way I would ever be able to tackle a job this big! Hats off to you Matt for taking us along for the ride! I have watched your D4 rebuild as well as Squatch253’s D2 and those actually made sense to me, but this excavator………………..no way!
Your color coded tie wrap reference reminds me of how we keep track of the count of the 25 pair binder groups of PIC telephone cables. Good idea, Matt!
Your doing a great job. If anyone wants to complain about you not working In the cold, let them deal with the cold. I'm like you. Work in a warm location... Sorry I was one that questioned your working in the rain Thanks for explaining it...
What a nice guy Matt comes across as. If you want to clean all that dirty electrical stuff. Remove all the larger bits of crap from around it then use a vac and brush to clean it out then spray it all down with lots of brake cleaner or isopropyl alcohol.to dissolve all the oil and grease.
Im impressed on how you handled the hydraulic lines and hoses markings. It looks to me one of the spool valves for the boom has rust in it? I see some red like material in one of the outlets so might be worth investigating what the deal with that is. At this point the rebuild is more tedious than the D4
*- Matt, I don't know how to get across my appreciation of all the challenges you take on.* *- Trying to do the block removal sure would spook the heck out of me.* *- I hope my encouragement works as support to you.*
It looks more complicated than heart surgery. We all hope your patient lives & works again. As well as getting all the hydraulic hoses connected correctly, I guess the path of each hose & position of each hose is important too.
Where’s the other video we voted on. I can’t get enough of your videos! It’s motivated me to get off my butt and start fixing stuff around the house! Keep up the great work!
Top spannering as usual, you've reminded me I need to attend to the leaking swivel housing on my mini excavator, ah the joys of second-hand equipment. Keep up the good work Mat 👍
I had NO idea what the complicated insides of an excavator were like. I've tackled some BIG projects in my life (building my own rustic homes, restoring 50' sailboat, etc. But...a project of the magnitude of what you are tackling....WOW!!
You need to wash the grey down with something, I agree. It's pretty filthy but it'll stand until you are ready to refit everything. In fact until such a time; it's better having all that oily muck all over! Well done. It's tough in the dark and damp even without cold. Keep it indoors! Until next time.
If the people that designed these machines actually had to work on them, you know they would come up with a better idea and solution to routing and terminating all those hydraulic lines ! Instead of that snake pit they have created now ! You are a braver man than most tackling that job !
"I'm feeling lazy now" says the man who is completely rebuilding an excavator!🤣 Love the videos and how you aren't afraid to tackle such a huge project!
When I was an apprentice back in 74 I used to clean a lotta machines prior to paint, was damn hard work! I’m sure you’ll get that machine running and looking like new! Or close! 🇦🇺🤣🤣
You sure will have a ton to do this winter . Lots of scraping and grease cutter around The sensatine electric and it should be fine ! Also with some Break Cleaner - Steam Clean in a can- . Excellent video and great job . Looking forward to the next one . Thanks for sharing !
Awesome Matt.The drive you have to take on such a huge project.And it looks like it all after you've done a hard days work already. You Matt are a machine and i salute you ❤
I also would want to clean that area. It’s a heck of a job but worth it to clean that dirt and oil mess. That would make me crazy… good luck. Love your channel
when you opened the final drive gear housing and found GOOD fluid ! , what a relief ! nice to find the end of the water infiltration. Love watching the progress !
Wow valve block is a big job, I think I'd rather do a head gasket job than valve block lol. I wish I lived closer I would definitely stop by and give you a hand. I look forward to the engine rebuild, take care.
Great work, in awe of it. The lives of many zip ties could have been saved with a label printer :), I have just bought one after spending the last week digging in my USB cable box looking for the cable I need....
Love watching you struggle as its so relatable to us mere mortals without flash workshops and toolboxes full of every tool on the planet, I just can't get out of my head the fact that fitters have to repair these things in the field with the engine and turning piece etc still in place, impossible
It is good to get that spiders nest cleaned out for just the cleaning. That block need inspection. We all look forward to the next go round. Thx for the vid. High^5
Hi Matt, WOW! What an undertaking you got you're self into. I thought I'd chime in here and tell you about cleaning filthy equipment and what I used back when I had a job. Let's talk Garbage Trucks and Filth, everything your dealing with and then some! Get some buckets and putty knife and start scraping the heavy stuff into buckets. It don't have to be perfect but the more you get off the less you'll wear. Next step, get some Commercial Oven Cleaner and a hand pump plastic garden sprayer and spray that mess down and watch it start to work. Get your hands on a steam pressure cleaner and have it ready to go as soon as your done spraying the Oven Cleaner. That machine will be as clean as factory new! Wear a full face shield to protect yourself!
"...why am I DOING this... that's a deeper question..." LMAO. I love your honesty. Here's a thought, I've always admired this kind of equipment and never had a chance to use any, let alone work on it. It might seem like a nightmare now but you're living my dream brother. I envy you so much the first day you put this thing back to work - THAT will be an episode! Hang in there Matt, we're all rooting for ya!
I hope this helps !! cut the bend off of your long allen key and use a socket on the drive end and if you heaps of spare sockets you can loctite them on
Matt, working alone at night in temperatures that make ice does not in my book qualify to be described as "a Fair Weather Mechanic" Since you are doing this for yourself, please consider that no employer would permit the current working conditions. We all do what must be done when required, do what you must as safely as possible, listen to that inner voice of "that could HURT ME" as you consider the next task. And just cause you got away with it before is no assurance of getting away again. Work smarter not harder. Good stuff Matt, keep 'em coming.
If you open your adjustable wrench all the way you can put the short end of your allen wrench in the hole of the adjustable jaw of the adjustable wrench. It's hard to describe but it will give you more control of your allen wrench than just putting it in the jaws of the adj wrench. If ya want me to send you a picture of what I'm talking about, happy to.
I know Matt is NOT doing this for the clicks, but can we all send his channel to 100,000 subscribers already? I've been with him since the first video of the Dozer. I send his vids to friends that would be interested. Appreciate the content, Matt. Thanks for taking the time to film it and edit it and post it for us. I work on my own cars and motorcycle (I have 6 kids and 5 cars) so I enjoy seeing someone like me that just researches and works on their own stuff.
Good Luck, The only thing that comes to mind is Humpty-Dumpty ... At least you can look back at unedited video for help in reassembly as even with the color coded system the path the lines take to connect correctly and not rub or fray is very challenging. Ray Stormont
Your courage to tackle such a big project is inspiring.
100%
I agree.
You're 1 smart cookie tackling this rebuild Matt hats off to you.
Genuinely a heart like a lion here, that or bloody mad
I am impressed by his courage and tenacity. My grandfather always said not a lot to lose in this situation. Its not going to get any worse by trying to fix it.
Love your understated and dry sense of humour. Got me laughing quite often. Love your Sheppard how she checks in at the most appropriate moments possible when you're balancing a ton worth of motor or trying to move something that she figures she should help you with lol Great stuff. Can't wait to see this girl all fixed up and ready to dig :-)
Well impressed with your decision to tackle the control block. It definitely needed to be done. Cinematically impressed by the shot of you struggling to pull the block while the well sorted bulldozer shines in the background. Ive thoroughly enjoyed watching your skills develop.
Matt's patience and persistence shines.
Agreed. I always look forward to his videos!
I cant believe you dont have a million subscriptions. I love watching you work more that watching somebody getting their vehicle pulled out of the mud. Keep up the great work!
Matt you are incredibly patient. Your rebuild of the bulldozer was beautiful. I expect this will be the same.
Another great video! I love that you aren't scared to tackle these massive projects, and that you're willing to take us along for the ride. You explain things well, have a methodical approach, and your sense of humor has really begun to show in your videos. Keep up the great work, and I'm looking forward to the D4 cold start video from your survey!
You are a brave man tearing into that thing. Great video as always!
There was a day I would have jumped right in, but my 70-year-old brain just can't let me now.
@@ClintsHobbiesDIY my 70 year old back agrees.
My 70 year old wife feels the same way!
Great episode Matt. I liked when you mentioned that it actually took you week to get that far. That's good insight as to how much time you really spend on each subsystem. I not been exposed to heavy equipment so everything I have learned has been from your channel. Looking forward to the winter videos. Happy Holidays.
*- YES, agreed, I heard That, too! I am glad you mentioned it. Thank you.*
That's one hell of a project you got! You seem to have the tenacity to complete this job.
The first tare down of an excavator I've seen on RUclips!
Well done, Matt! I've done similar tedious jobs with lots of electrical cables and used Panduit cable ties that have a white tab on the end that I can write on with a Sharpie.
I see a forklift or a tele handler in your future, Matt. That poor tractor isn't really cutting it...
Amazing job!
yea he could use a telehandler real bad.
I would never get that back in order again, I really admire your work! Love your videos ❤
This has got to be a labor of love for you. I'm SO impressed at your willingness to tackle the hard stuff. I can't wait to see this baby all cleaned up and purring like a kitten! I hope you have a hydraulic hose pressure testing rig set up so you can test all your new hoses before you put them back in. Staying tuned!
Electric motor is for the auto throttle function. Some machines have contacts on the joystick handles that speed the engine to the setting of the hand throttle position when you grip it and return to idle when released. Nice function for certain situations but not always needed. Libherr used it in the 80/90’s. Handles had gold rings around them that were the contacts. Make absolutely sure when making the 4/6 wire hoses with flange fittings that they’re aligned correctly before you crimp the opposite fitting. They don’t twist much and too much rotational pressure will cause the flanges to crack and break where they are welded. Not to mention you will have a hell of a time getting them connected. If possible you can crimp one end on and put it in place on the machine with the other fitting in place but not crimped to get the best fit then mark the fitting to the hose to get the proper position. Depending on the brand and type of hose and fittings you use you may have to skive the hose and you may need different dies for the crimper. 5000 psi hoses are more challenging than 3000 psi hoses for a dyi. Of course I haven’t made any 4/6 wire hoses in over 20 years now so I don’t know if anything has changed since then. I used Weatherhead brand then. Not familiar with any other but Parker 2 wire for the last 22 years. On the final drive motor the small hose is probably the brake release or a 2 speed function and the top is probably the case drain. Consult the hydraulic print if you have one. You can probably get a digital manual on eBay for the machine if you don’t already have one. At this point you should strip it on down and give it a good cleaning and fresh paint where needed. You should be able to disassemble the valve stack and clean and reseal it with no issues. Valve in back is for the thumb most likely. I enjoy watching and looking forward to the next show.
Your a brave soul. That valve block is going to be difficult that's for sure. Great video.
You are definitely a glutton for punishment ! What a huge , nasty job. To not mess with it in the winter is the smartest decision you have made. Keep up the good work thanks for bringing us along. You are an inspiration for sure.
It was obvious from the 'dozer series that Matt isn't one to shy away from big jobs...
However, I'm mildly concerned about his NEXT project once this excavator is back to pristine...
The +next_ is probably a nice 'simple' one such as building a track-loader from the ground up...
(And when I say 'ground up', I mean that Matt will begin by creating an iron-ore processing plant to produce the steel that he needs).
Impressive stuff sir... Keep up the good work!
The little valve under the boom is the crossover relief valve block. The blue electric valve back by the pumps would be for the thumb, generically called a DO3 valve.
You're the only channel I don't watch straight away, instead I wait until I'm settled and know I won't be interrupted, so I can relax and enjoy a delightful glimpse at a truly dedicated and knowledgeable craftsmen at work. It always makes me smile when you thank us for watching, I wouldn't miss it for anything.
Same here. Never watch one of these until settled in in the evening.
Hats off to ya Matt, editing is already a pain so to edit out all the zip tying too, wow, thanks for a great video.
Here is a trick when filming welding grinding paint ect.Use old trypod from light what have you.Place piece of window glass in front.Important :use zip car wash soap to wash glass 1shot glass to ice cream bucket soapy water.Dust particles ect will not stick to glass also nonscented baby wipes work great if you do need to clean in between shooting.Enjoying your series.
Nice work as always, here's a tip for hydraulic lines, if you have an air hammer hit the fitting on the line with the air hammer and it loosens them right up.
Bravo Mat...It is a HUGE undertake this "renovation".. Too many problems to solve but I'm confident, you'll successfuly finish it.. Many thanks for this video also...I hope we'll be able to see some other videos regarding the other pieces of it, like the motor or other parts during the winter.. Hope you to be well and to see your videos, soon again..
I always like to take things apart to see how they work, and i can usually get things back together. But this! Holy crap! what a complex system. I admire your ability to tackle this beast.
Matt, I think you did an outstanding job recording your disassembly. Seems to me to be a tedious task and to add cameras and video recorders is a whole added dimension. Although it does help in the reassembly process. Between the engine and hydraulic manifold,
it should take a good bit of the winter to finish. I enjoy watching your videos.
Those old Williams tools are the real deal. And the company is still in business! Boy, I don't envy you the cleanup on that gunked up chassis Matt.
A daunting task, Mr. Matt. Thanks for another great video! Moves along nicely.
Holly Smokes Matt! I was impressed with the D4 project. This is next level. If you actually manage to get this beast back together, you'll get the award for most complex project ever completed on RUclips.
It's a big "if" on that one, lol
Great job sir. As a millwright best long handle 1/2 inch drive ratchet for me has been Armstrong brand. Only one I ever needed after all the other crap ones. It was no stranger to a pipe snipe
By the time you're done with this project, you'll be able to get a job in Kernersville, NC at the factory 😁
As a child, when my parents wanted to shut me up they used to give me a bundle of string to untangle- I used to love it. With all those pipes I think you are definitely out of the same jar.😊
Thank you Matt. Always enjoy your content and videos. Looks like you’ll be a little busy this winter. Hope you have some heat in there. Take care.
You are working like an old-fashioned millwright. Be glad it's not snowing !
Next step... 10 Gallons of de-greaser + a hot water pressure washer.
You are going to end up with a good machine.
I do some little things and shudder at the thought of taking apart a pendulum clock, man the guts and courage to tackle that block is way beyond words. Thanx.
Great videos. Thanks for sharing. You're dedication to the depth of this rebuild is amazing...here's to your continued success. Merry Christmas & Happy New Year
Wow, what a complicated nightmare of a job. Hats off to you Matt.
Parabéns teus vídeos são muito bons e bem explicado. Abraço aqui do Brasil 🇧🇷🇧🇷🇧🇷
Matt, Excellent work and especiall on the organizing and marking those lines! Looking forward to the next video!
Good job, keep it up. I am still in awe of you courage and ability to take on these projects. 😀👋🇬🇧
And then Matt said "I'm feeling lazy" yeah, while were all sitting around with our feet up watching you bust your a**... Your a very hard working man, great video's and much respect sir!!
I commend you 100% for tackling a project this big yourself 👌🏼🤘🏼🤘🏼
I've worked on some filthy trucks and boats before, but that thing is nasty! I hope it is more clear in person than on video, but that is a maze of hoses and paths they have to run to avoid damage. Wishing you all the best and admire your work ethic. What you need is about 3 or 4 old coots like me to be standing around giving you advice. That would really make it better!
Man,
no need to apologize for not putting out a video that was supposed to be one thing, and then you end up with a different video…, I think we all just love getting to live this rebuild vicariously thru your work.
Was great to hear some of the tools you are using, are handed down to you by your “gramps”… I am 60yrs young.., and ain’t got no “gramps” around no more (miss him everyday).
Great video,
Thank you sir.
I was exhausted by the end of this video. I just kept thinking “thank god I don’t have to figure out how to put that thing back together “. You are a work animal.
You have big cajoneies…..taking on this project! What a nightmare it’s gonna be matching those hoses up! Very brave ! The world is watching you…..don’t drop the ball!! Enjoy your vids.
Thank you Matt that you sharing with us with these great stuff.
PNW Hillbilly - The World's hardest-working nocturnal heavy equipment restorer!! And don't feel bad about the cold. I moved FROM Portland/Beaverton and this a.m. it was 7 degrees BEFORE the wind chill factor.
No way I would ever be able to tackle a job this big! Hats off to you Matt for taking us along for the ride! I have watched your D4 rebuild as well as Squatch253’s D2 and those actually made sense to me, but this excavator………………..no way!
Your color coded tie wrap reference reminds me of how we keep track of the count of the 25 pair binder groups of PIC telephone cables. Good idea, Matt!
Your doing a great job. If anyone wants to complain about you not working In the cold, let them deal with the cold. I'm like you. Work in a warm location... Sorry I was one that questioned your working in the rain Thanks for explaining it...
Very inspiring that you tackle this huge project, I think its a big job to strip a motorcycle lol
What a nice guy Matt comes across as. If you want to clean all that dirty electrical stuff. Remove all the larger bits of crap from around it then use a vac and brush to clean it out then spray it all down with lots of brake cleaner or isopropyl alcohol.to dissolve all the oil and grease.
Really looking forward to the next video Matt. Joe.
Im impressed on how you handled the hydraulic lines and hoses markings. It looks to me one of the spool valves for the boom has rust in it? I see some red like material in one of the outlets so might be worth investigating what the deal with that is. At this point the rebuild is more tedious than the D4
*- Matt, I don't know how to get across my appreciation of all the challenges you take on.*
*- Trying to do the block removal sure would spook the heck out of me.*
*- I hope my encouragement works as support to you.*
I think you need to change your name to: Harbor Freight Hillbilly! :) Love your work Matt, no job is too big or too small!
i hope youtube paid for this re build. the most solid rebuild i have ever seen tyvm, im so happy i found your channel
I've seen you strip down and rebuild that beast of a Cat dozer, and I'm convinced you'll be succesfull with this machine as well :D
Wow Matt!! I never thought I would see another color chart Prang would be proud of you right now. Okay that was more for old Art Majors like me.😄
It looks more complicated than heart surgery. We all hope your patient lives & works again. As well as getting all the hydraulic hoses connected correctly, I guess the path of each hose & position of each hose is important too.
Where’s the other video we voted on. I can’t get enough of your videos! It’s motivated me to get off my butt and start fixing stuff around the house!
Keep up the great work!
I can't believe you are taking on such a complex project. Good for you!
Invest in a golden rod to put under the tarp. It will help keep it dry through the winter. 😊 Big job ahead on this project. Interesting indeed.
What a mission. Doing an amazing job + filming. Hats off Matt
Great job with the disassembly Matt. I know that you needed to strip out that valve block, but man what a time consuming task!!
This will end up the cleanest digger ever..can't wait till the summer when you roll it out !!😀😀😀
Top spannering as usual, you've reminded me I need to attend to the leaking swivel housing on my mini excavator, ah the joys of second-hand equipment. Keep up the good work Mat 👍
You are doing a great job mate, keep up the great work. 👍
I had NO idea what the complicated insides of an excavator were like. I've tackled some BIG projects in my life (building my own rustic homes, restoring 50' sailboat, etc. But...a project of the magnitude of what you are tackling....WOW!!
You need to wash the grey down with something, I agree. It's pretty filthy but it'll stand until you are ready to refit everything. In fact until such a time; it's better having all that oily muck all over! Well done. It's tough in the dark and damp even without cold. Keep it indoors! Until next time.
If the people that designed these machines actually had to work on them, you know they would come up with a better idea and solution to routing and terminating all those hydraulic lines ! Instead of that snake pit they have created now ! You are a braver man than most tackling that job !
"I'm feeling lazy now" says the man who is completely rebuilding an excavator!🤣 Love the videos and how you aren't afraid to tackle such a huge project!
I will tackle most anything but this one’s giving me anxiety. 😂
I have seen others using an air hammer or SDS hammer to rattle hose junctions to help loosen them.
This is going to be a next level full restoration by the time ur done mate holy moly
When I was an apprentice back in 74 I used to clean a lotta machines prior to paint, was damn hard work! I’m sure you’ll get that machine running and looking like new! Or close! 🇦🇺🤣🤣
You sure will have a ton to do this winter . Lots of scraping and grease cutter around The sensatine electric and it should be fine ! Also with some Break Cleaner - Steam Clean in a can- . Excellent video and great job . Looking forward to the next one . Thanks for sharing !
Awesome Matt.The drive you have to take on such a huge project.And it looks like it all after you've done a hard days work already. You Matt are a machine and i salute you
❤
I also would want to clean that area. It’s a heck of a job but worth it to clean that dirt and oil mess. That would make me crazy… good luck. Love your channel
when you opened the final drive gear housing and found GOOD fluid ! , what a relief ! nice to find the end of the water infiltration. Love watching the progress !
Man the struggle bus ride was good this week. This is a turning point once you get it clean and sorted out
You comments are great. I learned a lot. Not just not just grease monkeys. A project like this is very curious too all. Thanks
Wow valve block is a big job, I think I'd rather do a head gasket job than valve block lol. I wish I lived closer I would definitely stop by and give you a hand. I look forward to the engine rebuild, take care.
You have to be the most patient guy I’ve ever seen! Can’t wait until you get inside the shop and start breaking down parts videos!
Great work, in awe of it. The lives of many zip ties could have been saved with a label printer :), I have just bought one after spending the last week digging in my USB cable box looking for the cable I need....
Love watching you struggle as its so relatable to us mere mortals without flash workshops and toolboxes full of every tool on the planet, I just can't get out of my head the fact that fitters have to repair these things in the field with the engine and turning piece etc still in place, impossible
It is good to get that spiders nest cleaned out for just the cleaning. That block need inspection. We all look forward to the next go round. Thx for the vid. High^5
Hi Matt, WOW! What an undertaking you got you're self into. I thought I'd chime in here and tell you about cleaning filthy equipment and what I used back when I had a job. Let's talk Garbage Trucks and Filth, everything your dealing with and then some! Get some buckets and putty knife and start scraping the heavy stuff into buckets. It don't have to be perfect but the more you get off the less you'll wear. Next step, get some Commercial Oven Cleaner and a hand pump plastic garden sprayer and spray that mess down and watch it start to work. Get your hands on a steam pressure cleaner and have it ready to go as soon as your done spraying the Oven Cleaner. That machine will be as clean as factory new! Wear a full face shield to protect yourself!
You’re one brave man!! That is one mes of hoses!! Thanks for sharing
"...why am I DOING this... that's a deeper question..." LMAO. I love your honesty. Here's a thought, I've always admired this kind of equipment and never had a chance to use any, let alone work on it. It might seem like a nightmare now but you're living my dream brother. I envy you so much the first day you put this thing back to work - THAT will be an episode! Hang in there Matt, we're all rooting for ya!
I hope this helps !! cut the bend off of your long allen key and use a socket on the drive end and if you heaps of spare sockets you can loctite them on
Hi from Australia that is a big job you have taken on. You must enjoy that type of work.
All the work you are doing on this is quite the undertaking. I'm very impressed with your ambition. Thanks for taking us along on this project.
Matt, working alone at night in temperatures that make ice does not in my book qualify to be described as "a Fair Weather Mechanic" Since you are doing this for yourself, please consider that no employer would permit the current working conditions. We all do what must be done when required, do what you must as safely as possible, listen to that inner voice of "that could HURT ME" as you consider the next task. And just cause you got away with it before is no assurance of getting away again. Work smarter not harder. Good stuff Matt, keep 'em coming.
I'm with ya Matt..i know you cant hear me but i'm cheering you on , i watched all the tractor vids too...great channel..
If you open your adjustable wrench all the way you can put the short end of your allen wrench in the hole of the adjustable jaw of the adjustable wrench. It's hard to describe but it will give you more control of your allen wrench than just putting it in the jaws of the adj wrench. If ya want me to send you a picture of what I'm talking about, happy to.
I know Matt is NOT doing this for the clicks, but can we all send his channel to 100,000 subscribers already? I've been with him since the first video of the Dozer. I send his vids to friends that would be interested.
Appreciate the content, Matt. Thanks for taking the time to film it and edit it and post it for us. I work on my own cars and motorcycle (I have 6 kids and 5 cars) so I enjoy seeing someone like me that just researches and works on their own stuff.
Good Luck, The only thing that comes to mind is Humpty-Dumpty ... At least you can look back at unedited video for help in reassembly as even with the color coded system the path the lines take to connect correctly and not rub or fray is very challenging. Ray Stormont
You have a lot of guts to pull all the hoses looks like a major job putting it back together.