PPE transmission pan install 2020 Explorer ST

Поделиться
HTML-код
  • Опубликовано: 5 окт 2024
  • A fairly comprehensive installation of the PPE 10R80/10R60 deep transmission pan into my 2020 Explorer ST. Install will vary from model to model, however the basics apply to all 10R80/60 equipped Ford cars and trucks.
    ppepower.com/c...
    www.ebay.com/s...
    www.englishracing.net
    #englishracing #turbo #builtnotbought #haltechecu #haltech #10r60 #10r80 #ecoboost #auto #transmission #ppepower

Комментарии • 21

  • @hasibmohamed-sm8oy
    @hasibmohamed-sm8oy Год назад +4

    Follow up on how the pan worked out?

    • @AaronONeal1
      @AaronONeal1  Год назад

      Pan had been working great, I think it really needed a fluid change the most.

    • @hasibmohamed-sm8oy
      @hasibmohamed-sm8oy Год назад +1

      I’m thinking about putting the shallow pan on my 21 platinum but no dealership wants to install it(they said it wouldn’t fit or it’ll leak) so I guess I’ll do it myself, I wanted an update before diving in so thanks for the reply

  • @geom.s.70
    @geom.s.70 4 месяца назад

    How much oil did you get the right level at?

  • @davidmandziuk8493
    @davidmandziuk8493 10 месяцев назад

    Just use a Mityvac fluid extractor, thru the port. Check stone cold. Extractor has a 9 quart graduated capacity. NO NEED TO DROP THE PAN. Use AMSOIL ULV FLUID, BLUE CAP

  • @jamesriley918
    @jamesriley918 Год назад +1

    I just received a pan from PPE for the trans in my 2023 Explorer and it did not come with a gasket. What material did you use for the bead of gasket material that is visible in your new pan ?

    • @ninorandazzo844
      @ninorandazzo844 4 месяца назад

      Me as well, how did it work out for you

  • @machine7767
    @machine7767 8 месяцев назад +1

    What would you think of moving some of the oem magnets to the ppe pan?

    • @AaronONeal1
      @AaronONeal1  5 месяцев назад

      I think that would be a great idea

  • @joserascon6664
    @joserascon6664 Год назад +1

    Have you had any issues with your transmission? Since the 10 speed transmission is a known issue.

    • @AaronONeal1
      @AaronONeal1  5 месяцев назад

      Only because it was a 10R60 making 600 lb ft with the stock turbos and nitrous. Pan works great, I have it on my new transmission as well.

  • @zeex-14rse57
    @zeex-14rse57 9 месяцев назад +1

    What is the total height of the pan? Trying to find specs. Also, how much clearance ya have left after install?

    • @AaronONeal1
      @AaronONeal1  5 месяцев назад

      I'm lowered but about 5" to the ground

  • @sergioconuenaocanales4254
    @sergioconuenaocanales4254 Год назад

    What is the serial number of the part? 🙏🏼🙏🏼

  • @jwuonog
    @jwuonog Год назад

    Do you have the part number for the filter? I see both with the smaller hole, and with the larger hole and the extended part around the hole, not sure which one is the newest version.

    • @AaronONeal1
      @AaronONeal1  5 месяцев назад

      I don't happen to, but I can see if I have a spare on the shelf.

  • @lucian7182
    @lucian7182 Год назад +1

    Will the lack of heat shields cause any issues ?

    • @AaronONeal1
      @AaronONeal1  Год назад

      I haven't had an issues with trans temp

    • @lucian7182
      @lucian7182 Год назад +1

      @@AaronONeal1 this mod is definitely on my list.

    • @AaronONeal1
      @AaronONeal1  Год назад +1

      @@lucian7182 I have found that in the morning my 6 mile commute isnt quite enough to get full temperature now. Its not all the way warmed up until I go home for lunch. I dont have anywhere to race it on the way to work though so its not a big deal. But good peace of mind of the racetrack, keeps it average temp.

  • @benjaminj3767
    @benjaminj3767 Год назад

    "promo sm"