The 91 RXL is the best looking snowmobile Polaris ever made. I had one with SLP pipes and a chip for the computer and it really ran good. Then I wanted more HP so I found a SLP 650 engine made into a 707 kit which produced 165 HP..
Todd I just watched the video of the can awesome I just got back from Southern Ohio today I found a 95 650 SKS with 1500 miles it's at all that time and a former had it and it came from Colorado and he got it running and it still needs some TLC but it's in awesome shape 1500 miles on a 1990 650
DANG!! Sounds awesome!! I love the Triples. I bought a new XLT in 94 & 95. I’ve wanted another one since!! You are an inspiration! Are you in MN?? I’m up just South of Grand Rapids Mn. Thanks!!
Hey Todd got a question I have a 95 indy 500lc that has 2 stingers on it with no muffler how should I go about fixing this i can weld so making ones not the problem I'd really appreciate it if you get back to me
Pulled out the pump , a lot of play on the pump gear ! , Got a new pump on the way , thanks for your help and your time, we should go riding on of these days!
I'm going to wait and see what you charge for the can and I might just put one of them on EFI I don't have to change anything with that EFI will compensate on its own
Where can I personally message you about the rxl I can not get it to run on efi I have 3 sets of everything I I finally switched to carbs just to ride it once bought it after I was kart wheeled 8 times brand new and rebuilt it
Tell me when you start building. I think it sounds just like my 1000cc thundercat! Ill take one forsure Todd. Thanks! oh could you make a plate and badge it TC for trash can?
@@toddclyne3493 damn. Cause I'm trying to push more power and out of my 96 ultra and make it louder than it already is. I mean it is pushing 150hp right now.
MERCH STORE OPEN my-store-11480443.creator-spring.com
I hope pin striping comes back. It’s so cool to see on these old triples
It sure is
We’re doing our best to bring it back. Got another one coming soon!
That was the best lookin RXL hood out of all of them.
I had a 91...bought it 3 yrs old when I was 16. Used to rip it around my parents grass in the summer I was so psyched.
The 91 RXL is the best looking snowmobile Polaris ever made. I had one with SLP pipes and a chip for the computer and it really ran good. Then I wanted more HP so I found a SLP 650 engine made into a 707 kit which produced 165 HP..
Digit 9 uses a shoe lace for the springs looks like it worked great
I tried this it works great
I actuallt usually use vice grips. Latches onto the spring always in control never flys across the shop
Oh how I miss beer on cold days, great job guys.
Thanks Todd.
Central California Watching
Nothing better
I’ll be enjoying it this year ! First year back up north and I cannot wait for the fluffy white stuff !
Can't wait till you officially sell these for xlt and xcr's. Sounds great!!
still watching thos amazing rxl
Oh man! I love the way that sounds with the trash can! Cheers to that!!!
Heck yeah
sounds much better now great video
Thanks 👍
Man I can't wait to get a trash can for my rxl, that just sounds amazing!
email me polaris.trashcan@gmail.com
Todd I just watched the video of the can awesome I just got back from Southern Ohio today I found a 95 650 SKS with 1500 miles it's at all that time and a former had it and it came from Colorado and he got it running and it still needs some TLC but it's in awesome shape 1500 miles on a 1990 650
Sweet find
Must be a 98 you see that seat Todd! lol! great job on these can's
Thanks buddy
Awe man, you guys know how to enjoy life! 🙌🏽👍🏽💚
Thanks buddy
Mozart and Beethoven are smiling down from the heavens
Lol you got that right 😂
Lmao
Hahaha
Looking forward to hearing from you on buying one of these for my 97 rxl
"91 Hood" is pretty cool!!!
Thanks!
DANG!! Sounds awesome!! I love the Triples. I bought a new XLT in 94 & 95. I’ve wanted another one since!! You are an inspiration! Are you in MN?? I’m up just South of Grand Rapids Mn. Thanks!!
Yes mn and not far from you
Sounds awesome guys thanks have a great day.
Sure thing thanks Brad
New muffler sounds perfect.
Sounds great. Very slick.
Indeed
Always wanted to put a triple motor in a street bike frame. There's on dudes got 700 twin in kz 650 frame. He drags zx 12. Smoked the Zx by 400 feet.
nice
How much would a trash can be for skidoo I bought a machine I been have trouble with already ride it once and now I put in a shop to get fix
@@ClintonBear-r5d I don't make any for a skidoo
Sounds great. Love the videos!
Thanks
Hey Todd and Trenton, i would really like a trash can setup from you gents. Thank You.
Making them now. Just about got all the parts to put them together
Sounds amazing
It does, what a difference
where can I get this exhaust sounds awesome
polaris.trashcan@gmail.come
How many busted knuckles have I had over the years with those exhaust springs and vice grips lol
Ive had more using a spring tool than a vise grip believe it or not
Omg, what a nice sound with the Trash Can! 😎😎 Triple beer. Lol
Hey Todd got a question I have a 95 indy 500lc that has 2 stingers on it with no muffler how should I go about fixing this i can weld so making ones not the problem I'd really appreciate it if you get back to me
Sounds great!!! I have a 91 rxl as well with some pipe on there...now it’s time for the top end to be done..oof..
Get wrenching
Sounds awesome!I see a trashcan coming my way todd.cheers!
You bet!
I need your help with my 97 xcr triple triple triple!!!
👀
I have antifreeze in my pipes , is my water pump bad?
@@nathanrogalla5675 head or base gasket. To you get pressure in you cooling system?
Pulled out the pump , a lot of play on the pump gear ! , Got a new pump on the way , thanks for your help and your time, we should go riding on of these days!
Sounded good ! Nice fab. work !
Thanks
Dang!! I like how u guys work!! U guys would fit in great with my race team!! Crack some beers and let's get to work boys!!
🤣🤣🍻
Man if I owned an rxl I'd buy one
Well I am a High Life fan but i would bring you guys some Bush Light... just to here those three cylinder angles sing...
From above
Sweet sound of a big block Polaris. 💕🎷
You got it
Nice
thanks 😁
Sounds Like Old Banshee
I absolutely require that for my 97 600 XLT...
soon
Awesome !
I'd like to see you do a test stock exhaust versus crash king and see which one has more power
That test will not happen. It is what is.
Do they make that can for a 97 700 rmk bb
I do not. sorry
Do you still have kits available? I just acquired a blue gem 94 rxl...
You could use a old pulled cord to take off those exhaust Springs it'll make life lot easier than using vice grips
They seem to work
Todd is that just an empty can correct , it sounds so amazing
Not empty
It looks good sitting beside by 95 RXL
I bet it does
I'm going to wait and see what you charge for the can and I might just put one of them on EFI I don't have to change anything with that EFI will compensate on its own
@@truckdriver5880 shouldn't have to re-jet either
Where can I personally message you about the rxl I can not get it to run on efi I have 3 sets of everything I I finally switched to carbs just to ride it once bought it after I was kart wheeled 8 times brand new and rebuilt it
I'm no RXL expert. Mike knows more about them than me. Fb has a couple great groups just for the RXLs
How can I get in contact I have a 94 xlt and a 93 rxl
email me polaris.trashcan@gmail.com
Well there you go
Are there any light weight hoods for a 97 ultra agressive sled?????? Mine weighs a ton
Wahl bros sells one
Tell me when you start building. I think it sounds just like my 1000cc thundercat! Ill take one forsure Todd. Thanks! oh could you make a plate and badge it TC for trash can?
haha love it
Where can I buy one of thete
Right here at my email polaris.trashcan@gmail.com
@@toddclyne3493 I sent u a email about it
How can i get one of these
email me polaris.trashcan@mail.com
Sounds good
👍
How much you going to be charging for a kit I still want one for my 95 rxl efi
Haven't come up with a price yet
How much r the cans
email me polaris.trashcan@gmail.com
So much better with the trash can
We agree
I want to buy one how much
I like the trash can better yes sir 🇨🇦🇨🇦
thanks
!!Absolutely BITCHIN!! Sounds great!
THANK YOU
Not able to get on your Polaris trashcan Gmail site still interested in getting trash can for my 97 RXL
polaris.trashcan@gmail.com
@@toddclyne3493 Gmail still keeps saying that address is invalid
@@randallwalters6545 do you have Facebook?
@@toddclyne3493 yes
@@randallwalters6545 send me a pm on fb
How hard do you think it would be to make some homemade hood screens for a wedge?
Not hard. I don't like using the word home made. Custom sounds better
Do u sell these or show how to build them?
I sell them polaris.trashcan@gmail.com is how to get one. Thanks
Where can you buy trash can
I'm working on that
@@toddclyne3493 good That will be Cool
Oh hell yeah bud
👍
Just tinkering and snapping a few open , nothing like it .
Wow that sounds great! The XLT cans are almost identical... do you think one of you homemade ones would work on an XLT?
Once I get a bunch of the 650 and 680 ultra ones build I'll do others.
@@toddclyne3493 Awesome! I’ll be on the lookout on Facebook.😎
@@colelucyk304 I'll post when ready
@@toddclyne3493 i want one too for my Xlt 1993 .....!!!
How hard would it be to make a set for triple tuned pipes?
Very!!!
@@toddclyne3493 damn. Cause I'm trying to push more power and out of my 96 ultra and make it louder than it already is. I mean it is pushing 150hp right now.
Hey bud, I would take one for a 98 xlt also?😉
It will happen in time. Mike has a xlt that I can use to make a template.
What's the prices on one of those trash cans for an rxl
Working on pricing
Where do you get the cans from?
polaris.trashcan@gmail.com
Nice. I likeitalot.
Sweet thanks
Sounds like a ripper
sure is
sounds great i want one for my xcr 600! plz sell them cheers 🍻
I will, thanks
Rxl
Yepper
kant wait to order a trash can 😁
🖖💪😉
I said 95 it's a 90
Lol I kinda figured it out
Busch Light?🤢🤮🤣
We all have our own flavor. Lol
Shity as beer to
Marcus move on troller. Lol or is it Mike now?
Hey.. the guy that can't figure out how a clutch work has to troll in youtube now since he got booted from the Indy garage.
@@WedgeLife 😂😂😂👏👏👏
Where did you get this can at ?
I make um