How to Replace Front Wheel Bearing and Hub 2006-08 Dodge RAM

Поделиться
HTML-код
  • Опубликовано: 8 ноя 2024

Комментарии • 16

  • @TRQ
    @TRQ  4 года назад

    √ *Watch the Video*
    √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
    √ *Do it Yourself*
    √ *Save Money*

  • @robertkeene6097
    @robertkeene6097 5 месяцев назад +1

    Never cease to impress ! Thanks a ton man keep it coming

  • @dma-i8d
    @dma-i8d 2 года назад +2

    Best repair video I've ever seen. Only the most important parts. You are awesome!! Thank you!!!

  • @slipshaft
    @slipshaft 2 года назад +2

    Is it the steering bar or a tie rod? Also, I wouldnt "bonk" too hard on that aluminum knuckle! These videos make it look so easy...parts are often fused together with rust. The only way I could get this done was to entirely remove the spindle and pound out the bearing from behind. That's after I had to jack up the truck with the jack pressing on the bottom of the lower ball joint to get that apart first!! This is not an easy job at all if you have rusty parts.

  • @blh3741
    @blh3741 Год назад

    Easy -Peasy! Thanks!

  • @tone9460
    @tone9460 7 месяцев назад

    If i cant find a repair video from TRQ im not happy 😅

  • @pedroguzman4084
    @pedroguzman4084 3 года назад

    Quick and easy!!! Thanks

  • @dlascwboy
    @dlascwboy 3 года назад +2

    No Wire ?, I don't see one on my passenger side (06 Big Horn).

  • @geezee1579
    @geezee1579 2 года назад

    I did not remove the tie rod nut or the tie rod and I cannot get a impact socket on the bolt for the bearing assembly as the axle is in the way. The axle is loose and I did not have to hammer it to get it loose. Do I need a regular socket or would removing the Tie Tod allow me more room to get better access to the bolt. Also you do not have a backing plate on this truck.

  • @jacobmartin1181
    @jacobmartin1181 3 года назад

    Is this for a 2008( 2WD )Ram SXT?? I need to replace mine

  • @16352huey
    @16352huey Год назад

    Nice job!

  • @michaelharris4630
    @michaelharris4630 3 года назад +1

    is the driver side the same

    • @TRQ
      @TRQ  3 года назад

      +Michael Harris Yes, the procedure should be the same for the other side.

  • @Herculese182
    @Herculese182 3 года назад

    He said, "give her a few bonks"

  • @antcri730
    @antcri730 3 года назад

    You should have made clear that you're removing the caliper AND bracket and not just the caliper.

    • @slipshaft
      @slipshaft 2 года назад

      Yep he removed them all as one piece. That works.