it happens Miguel when doing change overs people forget to write it all down what they run into so your not prepared for those road bumps but now at least the tanks in pumps wired up and just a few odds and ends needed to finish it off so the rear end can go in next.
Nice work! When you get everything connected just run a gallon of gas through the fuel tank and lines and drain into a container to clean the system out.
When this is done it will be one of the finest examples of what to do with the GS your car is one of my favorites. When are you going to fix the blemish on your driver side door?
takes time to get it right, the thing that always hangs up projects like this is you will end up needing a special tool or random part or two that isn't easy to source. I collapsed a hard line on my fuel pump hanger because I was changing the fuel pump and the line nuts were really in place had to take it to a welder that only added a week to a 2 hour job.
Totally lost on the fuel tank wiring. I hate electrical, I'm swapping my 95 gst with parts from a 95 gsx. I got the tank and everything bolted on I just need to wire in the new tank to my existing harness so I can check for leaks and to see if my new walbro 450 is working. Do you splice the wires noted in that diagram and then just leave the harness connectors from the FWD harness unplugged?
Few things I would have done for electrical is solder and heat shrink connectotions instead of those crimps. I know the wiring wont move much but still just a fail safe. Also if running an old fuel pump test with some jumper wires incase tge fuel pump is siezed. Very good video nonetheless.
I'm thinking about making a build like yours or the eclipse from FaF 1 haha. I really can't decide. FaF 1 Eclipse would be sick....but I don't know man. ^^
I definitely wouldn't let lazy do the wiring... he just used butt connectors that aint a stereo bro.... you should have soldered and heat shrink it... save you from burning your whole car down
Notification Squad where you at!!!!!!!
Squad 🤟🏼
Suh dudes
it happens Miguel when doing change overs people forget to write it all down what they run into so your not prepared for those road bumps but now at least the tanks in pumps wired up and just a few odds and ends needed to finish it off so the rear end can go in next.
Yup! Subframe and diff on next video
Nice work! When you get everything connected just run a gallon of gas through the fuel tank and lines and drain into a container to clean the system out.
That’s what’s next 🤟🏼
I have a 97' 420a and this is probably the most awesome thing I've seen
Thanks!
You got some dope ass content bro! You got a Honda guy watching your channel now 💪💪💪
Also are u doin a write up some where so ppl can know what they need.
Nice work! I am now installing in my Eclipse fuel cell, too. 72 litres with foam :D
Sick bro! Fuel cell was my last resort.
I must place it in trunk, to that sink where spare tire is, because I have swapped subframes from RX-7 :D
Nice jobs guys having fun
6:11 lmfao. Exact words when you see your lady call just before you answer it 😂😂
Saludos, Miguel, el proyecto esta quedando genial, te felicito. Un equipo de trabajo con buen humor es lo mejor.
Asi es, muchas gracias amigo 🙌🏼
When this is done it will be one of the finest examples of what to do with the GS your car is one of my favorites. When are you going to fix the blemish on your driver side door?
Thank you man 🙌🏼
I saw some carbon fiber doors panels online that could be a good fit
That looks awesome what you are doing to your car my little brother has a car just like yours but his is a 1995 and his is bagged
Thats dope bro
How much longer till it’s done can’t wait for the finished product 🔥🔥🤘🏽
Hoping to have it done real soon!
takes time to get it right, the thing that always hangs up projects like this is you will end up needing a special tool or random part or two that isn't easy to source. I collapsed a hard line on my fuel pump hanger because I was changing the fuel pump and the line nuts were really in place had to take it to a welder that only added a week to a 2 hour job.
Bro that old fuel pump is nasty lol! Now i know what happens when your gas sits, gets all coked up haha. Great video man!
Hahaha Thanks man! 🙌🏼
@5:41 u shouldve been like "No stes de Nena wey!" 😁
Y si 😂
Just got down to cali in my eclipse! Let me know if you ever go to a meet. Would love to meet up.
Wow the dealer had the rear subframe bushings?
Yup! They’re were stupid expensive though 😤
Big thanks for your videos man! They will help me alot at my own swap.
What will be the hardest work on the swap? I have to be prepared ^^
Probably the wiring. Everything else isn’t too bad
Ok, I'm an electronics technician... Should be no problem ^^
I'm just scared of the transmission swap
Good job guys! #SaveTheEclipse
What parts do I have to buy to make a 420a 2g gs eclipse to awd
Totally lost on the fuel tank wiring. I hate electrical, I'm swapping my 95 gst with parts from a 95 gsx. I got the tank and everything bolted on I just need to wire in the new tank to my existing harness so I can check for leaks and to see if my new walbro 450 is working. Do you splice the wires noted in that diagram and then just leave the harness connectors from the FWD harness unplugged?
Few things I would have done for electrical is solder and heat shrink connectotions instead of those crimps. I know the wiring wont move much but still just a fail safe. Also if running an old fuel pump test with some jumper wires incase tge fuel pump is siezed. Very good video nonetheless.
Its coming along!!
Hay where did you get those save the eclipse stickers
Hit up @mistergsx on ig
What kind of coilovers u have
Megan ez streets
Good work, step by bro.
Thanks man 🙌🏼
A two door EVO.......take that SUBIE fanz!
Lol
I'm thinking about making a build like yours or the eclipse from FaF 1 haha. I really can't decide. FaF 1 Eclipse would be sick....but I don't know man. ^^
Do a modern day one
Damn wish I had motivation like this. I’m the most skillful one of my friends but yet the laziest. Haha.
With all that work...why not get a fuel cell to replace that fat gas tank?
I want to keep it as oem as possible
Dis gonna be sweet
😎
“Spit on it “🤣💀
bro does anyone...ANYONE know where to get a gs or gsx 95 eclipse stock for an okay amount of amount?
Getting there!
I can't wait. 👍💪🇵🇷
🙌🏼
When the wife calls lol
Ya valió shit 😂
Mitsubishi gang
Gang 🤟🏼
That has to be the reason they call him lazy
lol he said two guys one DSM.
😏😂
I definitely wouldn't let lazy do the wiring... he just used butt connectors that aint a stereo bro.... you should have soldered and heat shrink it... save you from burning your whole car down
😃👍
When the wife calls 🤦♂️
👍👍👍 like
🙌🏼