Unfortunately, I didn’t record that part. It really depends on the stock you’re using. You don’t need to modify the gun itself. In my case, I used a stock from LCT. I used a drill press to enlarge the hole slightly bigger than the pin on the Saiga 12. Be careful not to make it too big, or the stock won’t be stable. As you can see in the video, I also made a custom spacer to reduce any wobble in the stock. I hope this helps!
@@jeesulii_YT yes of course! It‘s sometimes hard to chrono it, because of it shooting three BBs at once, it gets false readings. But it is arround 0.6-1 Joule by 100-130psi on my HPA Regulator. If you use the stock Magazine you can adjust the Gasflow to get max. 1.1-1.2 Joule. 🙌🏼
@ Thanks for the quick reply, my friend! I'm desperately looking for answers and a solution to my problem. What brand is your HPA adapter? Mine is from Airtac, and I set it to 130 psi and I can't get it to go over 0.4-0.5 on my Saiga. Is this normal? What can I do to get more power?
@ Hey i also use the one from Airtac 1. It might be wrong chrono readings. If it has distance, the same it had with Green Gas I wouldn’t be to concerned. If the BBs get a nice hop and have distance I wouldn’t change anything (always make sure all 3 barrels have BBs loaded when using the chrono. 2. Sometimes HPA Adpaters are hard to get working, contact the support of Airtac, they will figure it out and might send you a new one. Maybey check if you installed everything correctly and the Valve sits right. 3. Some Saigas have problems after some cycles with their nozzles, especially when using HPA Adapters, because of the Springs of 3rd party mags dont have enough Force to accelerate the BBs fast enough. Try checking your nozzle for any Damage.
I listed all of the parts used, by name in the videodescription. Some i got off ebay others from different websites. The side-railmount (for example) is very common you should find it almost everywhere (amazon etc.). The Handguard i got from monstrumtactical.com. ✌🏻
@@franciscoperezsanchez6038 It sounds like there may be a bit of a language barrier here, so I just want to clarify: could you let me know which type of cylinder head you’re referring to? There are aftermarket options available, but generally, there’s no need to replace the original unless it starts having issues.
Just for info: for dismounting the stock pin you have to fold the stock (not all the way, midway it's fine) and never with the stock close.
GBBR ALWAYS ON !!!!!!!!!!!!!!!!!
GAS ON!!!!!!!!!!
BLOWBACK ON!!!!!!!!!!!
REALISTIC ON!!!!!!!!
AEF OFF !!!!!!!!!!!!!!!!!!!
Great video dude. Cool and relax 👍🏻
Thank you! ✌🏻
Can you show the process on how you drilled out the stock hole
@@Rostmeo1 ✌🏻
Unfortunately, I didn’t record that part. It really depends on the stock you’re using. You don’t need to modify the gun itself. In my case, I used a stock from LCT. I used a drill press to enlarge the hole slightly bigger than the pin on the Saiga 12. Be careful not to make it too big, or the stock won’t be stable. As you can see in the video, I also made a custom spacer to reduce any wobble in the stock. I hope this helps!
@@RCONAIRSOFT Thanks! I will definitely try it out
Hi, could I ask you how many joules does it show on the chrono? Thanks
@@jeesulii_YT yes of course! It‘s sometimes hard to chrono it, because of it shooting three BBs at once, it gets false readings. But it is arround 0.6-1 Joule by 100-130psi on my HPA Regulator. If you use the stock Magazine you can adjust the Gasflow to get max. 1.1-1.2 Joule. 🙌🏼
@ Thanks for the quick reply, my friend! I'm desperately looking for answers and a solution to my problem. What brand is your HPA adapter? Mine is from Airtac, and I set it to 130 psi and I can't get it to go over 0.4-0.5 on my Saiga. Is this normal? What can I do to get more power?
@ Hey i also use the one from Airtac 1. It might be wrong chrono readings. If it has distance, the same it had with Green Gas I wouldn’t be to concerned. If the BBs get a nice hop and have distance I wouldn’t change anything (always make sure all 3 barrels have BBs loaded when using the chrono. 2. Sometimes HPA Adpaters are hard to get working, contact the support of Airtac, they will figure it out and might send you a new one. Maybey check if you installed everything correctly and the Valve sits right. 3. Some Saigas have problems after some cycles with their nozzles, especially when using HPA Adapters, because of the Springs of 3rd party mags dont have enough Force to accelerate the BBs fast enough. Try checking your nozzle for any Damage.
@ Ok thank you very much, tomorrow I will review everything you have told me, greetings and thanks again
where can you buy these parts?
I listed all of the parts used, by name in the videodescription. Some i got off ebay others from different websites. The side-railmount (for example) is very common you should find it almost everywhere (amazon etc.). The Handguard i got from monstrumtactical.com. ✌🏻
Q tipo culata lleva???
It's the stock one.
@@RCONAIRSOFT q marca es la culata q pones a la saiga 12 k ?
@@franciscoperezsanchez6038 It sounds like there may be a bit of a language barrier here, so I just want to clarify: could you let me know which type of cylinder head you’re referring to? There are aftermarket options available, but generally, there’s no need to replace the original unless it starts having issues.
Handguard: Monstrum Tactial
Stock: LCT
Trace: 5KU Shotguntracer