Hey I rarely ever drop comments, But I loved this video! Keep doing these reviews you go about them so differently , I love that you crash test and then tear it apart. No one else does this
That was very informative thank you! I want to get into FPV and I have been researching for a week now. The amount of information is crazy. I think I will start with such a kit and if I decide to move forward I want to be able to use the lenses and remote control from this drone which I understand is possible if I get a drone with the same communication protocols. I also liked that you have modified your Cetus-X, how hard it is to add an additional higher quality camera to record images. Because I would like to do something like this.
Thanks! Adding runcam thumb is not too hard, but I am not sure if Aquila is powerful enough to carry one. For Cetus it was difficult in some cases and Aquila is definitely less powerful
So auto search channel does not work? (Aquila might change channel by D switch toggle) If not - can you try disassemble and check if wire still connected to vtx, and if antenna (a small piece of wire) not broken?
@@petrokey_en no it connects to the drone the goggles connect to the drone and also i checked the antena its still connected also the fpv module is blinking blue light like not the drone only the camera part but the goggles just show a black screen with numbers above it like the signal that its on do you know i could contact beta fpv if it ends up not working do you think i could buy the co4 with vtx think and attach it to the drone or what should i do
@prohackerahmedzagabra5874 the numbers you are speaking about - is it a drine info like battary value or mode? If you have these OSD then the vtx itself is ok, but problem with camera. I am not sure about c04. I know that betaflight version (with 5 wires) will not work because of different proptiatory digital protocol used. But about c04 Cetus - needs clarify with Betafpv support
@@petrokey_en its not the osd its something else do you know how i could contact beta fpv support the thing that shows in the screen is the signal that its connected to
I've sent this question to betafpv. Waiting for responce (they have holidays). Anyway mail or 'ticket' form is available here support.betafpv.com/hc/en-us/articles/900004682543-Contact-US#:~:text=Please%20don't%20hesitate%20to,Email%3A%20support%40betafpv.com
I have one but mine won’t fly any more 😭i connected it to the pc to see the beta flight but after I was done the drone won’t fly the same no more like it just stays in the ground and it won’t go back up it dose connect to control and goggles but won’t fly up again and there is no video showing how to update the flight controller??? Pls help
Very useful video, thanks! :)
Hey I rarely ever drop comments, But I loved this video!
Keep doing these reviews you go about them so differently , I love that you crash test and then tear it apart. No one else does this
Thanks!!
The other connection on the camera/vtx is probably the OSD info being sent to the vtx. Yellow wire?
Yes, as I understood the osd is applied at vtx, so the 3th wire sends vtx controll info (like power and frequency) and osd data
That was very informative thank you! I want to get into FPV and I have been researching for a week now. The amount of information is crazy. I think I will start with such a kit and if I decide to move forward I want to be able to use the lenses and remote control from this drone which I understand is possible if I get a drone with the same communication protocols. I also liked that you have modified your Cetus-X, how hard it is to add an additional higher quality camera to record images. Because I would like to do something like this.
Thanks! Adding runcam thumb is not too hard, but I am not sure if Aquila is powerful enough to carry one. For Cetus it was difficult in some cases and Aquila is definitely less powerful
Very good video, i own a cetus x, i could buy only the drone? The remote controller 3 will work with aquila?
Yes. If you've bought cetus x long time ago then most likely you have elrs2. Then will need downgrade elrs version of aquila to 2 (see next video)
Hey I have a quetion, Is the motor fixed? Can I replace the motors?
Yes, you can
Thanks!
Hello could you help me with my issue my aquilla 16 after a crash it pairs to the headset but does not display it's just a black screen
So auto search channel does not work? (Aquila might change channel by D switch toggle)
If not - can you try disassemble and check if wire still connected to vtx, and if antenna (a small piece of wire) not broken?
@@petrokey_en no it connects to the drone the goggles connect to the drone and also i checked the antena its still connected also the fpv module is blinking blue light like not the drone only the camera part but the goggles just show a black screen with numbers above it like the signal that its on do you know i could contact beta fpv if it ends up not working do you think i could buy the co4 with vtx think and attach it to the drone or what should i do
@prohackerahmedzagabra5874 the numbers you are speaking about - is it a drine info like battary value or mode? If you have these OSD then the vtx itself is ok, but problem with camera.
I am not sure about c04. I know that betaflight version (with 5 wires) will not work because of different proptiatory digital protocol used. But about c04 Cetus - needs clarify with Betafpv support
@@petrokey_en its not the osd its something else do you know how i could contact beta fpv support the thing that shows in the screen is the signal that its connected to
I've sent this question to betafpv. Waiting for responce (they have holidays). Anyway mail or 'ticket' form is available here support.betafpv.com/hc/en-us/articles/900004682543-Contact-US#:~:text=Please%20don't%20hesitate%20to,Email%3A%20support%40betafpv.com
I have one but mine won’t fly any more 😭i connected it to the pc to see the beta flight but after I was done the drone won’t fly the same no more like it just stays in the ground and it won’t go back up it dose connect to control and goggles but won’t fly up again and there is no video showing how to update the flight controller??? Pls help
Aquila does not work with betaflight sw. You will need 'betafpv configurator' sw (it looks similar but it is another one
@@petrokey_en bettt bro thxs a lot