This is great information, so thanks for that! Extremely helpful! One little quibble though, Waaaaay too fast with the mouse. Its not always easy to see what you are actually doing on the screen. Had to rewind about 20 times to make sense of parts of it.
Muchas gracias. Si quieres puedes ver este otro tutorial donde hago un edificio con forma de terreno y agradezco cualquier sugerencia! ruclips.net/video/bVBJc39oaN8/видео.html
Gracias a ti Ahorita me encuentro realizando mi proyecto final de carrera en un terreno con muchas curvas de nivel, tus tutoriales me han servido mucho
por donde te podría pasar una imagen para que me des tu opinión o solución con un problema, resulta que tengo una plataforma inclinada y curva pero cuando llega al enlace de las otras plataformas es imposible que este perfecto, llega desplazado de alguno de los extremos unos pocos centímetros
Sorry it won't work with Revit 2014 you'd have to use other techniques to do that like the one in the first part of this video: ruclips.net/video/bVBJc39oaN8/видео.html Export a DWG from the topo and bring it back. Then (the video doesn't show but you could do a kerb from the Roof slab with an edge or sweep...
VP BIM Channel am already doing on the kerb by using sweep method. the problem for creating path of sweep is in defferent workplane when creating the sweep method. another doubt, how to create center line of road by using on toposurface. (same error for creation of kerb stone)
Check if you picked the right Profile family (see minute 0:38). Then load it again into the project. Then check that you are picking the profile family from the right place the same as I did on minute 1:23 will do. IF you still can't do it let me know again and I will help See more videos at ruclips.net/channel/UCeRp1I0xoYMXCrKMRZKewjg
I am doing both things the same way you are, but I guess it must be something else because I was trying another way, creating a line based family from a generic family and when I try to load one into the other it doesnt shows up. Thanks for helping
I use a plugin - Kiwi Bonus Tools that makes the floor match the topo or a Dynamo script... if you don't have bonus tools and Dynamo is to complex anyway... I would probably just use the technique from the video in this link... You can divide the Topo surface; export to DWG; import back into a massing environment and create a roof by face and then use the edge tool. Or just use the cross (planting family) as I did but then create a sweep from a spline drawn by snapping to the cross families. Check the video an it will be clearer I hope... ruclips.net/video/bVBJc39oaN8/видео.html or this one ruclips.net/video/V4qZdlu-JpE/видео.html
I tried using doing the roof technique but I kept getting a warning that I could not create the roof because the topo mesh was too complex and I need to simplify it. I was not sure how to simply it since it was an imported model and simply took that model and converted it from import. I can try using the other two suggestion you made. Thanks
This is great information, so thanks for that! Extremely helpful!
One little quibble though, Waaaaay too fast with the mouse. Its not always easy to see what you are actually doing on the screen. Had to rewind about 20 times to make sense of parts of it.
Thanks a lot !!! This is the way you make Kerbs in Floors with specific slopes
thanks for shaing
Many thanks
simple and straight
Good suff! Thanks for sharing!
Thanks ! its help me a lot...
just great!!
best wishes
Thank you so so so much.
this is awesome
Excelent, thank you.
How can you pick lines that quick? Double/triple clicking over the part of line? Doesn’t work with mine.
YOU CAN PRESS TAB HAH
thank you
que ingenioso me encanta, me suscribo
Muchas gracias.
Si quieres puedes ver este otro tutorial donde hago un edificio con forma de terreno y agradezco cualquier sugerencia!
ruclips.net/video/bVBJc39oaN8/видео.html
Gracias a ti
Ahorita me encuentro realizando mi proyecto final de carrera en un terreno con muchas curvas de nivel, tus tutoriales me han servido mucho
por donde te podría pasar una imagen para que me des tu opinión o solución con un problema, resulta que tengo una plataforma inclinada y curva pero cuando llega al enlace de las otras plataformas es imposible que este perfecto, llega desplazado de alguno de los extremos unos pocos centímetros
Thank you very much for this tutorial. It helps me a lot
Finally!!!
You're right! and this is great not just to do kerbs, this is great to do fences and any railing and host it on the topo!
Good tutorial but poor video quality makes it harder to follow. Should be slower and clear.
genius
I can't create railing on top of 'toposurface'.., doesn't active "pick new host" when clicking railing.
And you are using Revit 2018?
Revit 2014
Sorry it won't work with Revit 2014 you'd have to use other techniques to do that like the one in the first part of this video:
ruclips.net/video/bVBJc39oaN8/видео.html
Export a DWG from the topo and bring it back. Then (the video doesn't show but you could do a kerb from the Roof slab with an edge or sweep...
VP BIM Channel
am already doing on the kerb by using sweep method. the problem for creating path of sweep is in defferent workplane when creating the sweep method. another doubt, how to create center line of road by using on toposurface. (same error for creation of kerb stone)
I cant do it, when i edit the railing it doesnt show me the profile I made so I cant change the circular handrail.
Check if you picked the right Profile family (see minute 0:38). Then load it again into the project. Then check that you are picking the profile family from the right place the same as I did on minute 1:23 will do. IF you still can't do it let me know again and I will help
See more videos at ruclips.net/channel/UCeRp1I0xoYMXCrKMRZKewjg
I am doing both things the same way you are, but I guess it must be something else because I was trying another way, creating a line based family from a generic family and when I try to load one into the other it doesnt shows up.
Thanks for helping
I'm happy to take a look at the file if you are able to send it to me. my email is sup.vpbim@gmail.com
free like a Hackerman :v
is this not available on 2015?
It's not available in 2015. In 2015 I would use the Floor 'slab edge' tool with a kerb profile
When I initially created the top it was created from an imported model. If I use the floor will it follow the contours of the topo?
I use a plugin - Kiwi Bonus Tools that makes the floor match the topo or a Dynamo script... if you don't have bonus tools and Dynamo is to complex anyway... I would probably just use the technique from the video in this link... You can divide the Topo surface; export to DWG; import back into a massing environment and create a roof by face and then use the edge tool. Or just use the cross (planting family) as I did but then create a sweep from a spline drawn by snapping to the cross families. Check the video an it will be clearer I hope...
ruclips.net/video/bVBJc39oaN8/видео.html
or this one
ruclips.net/video/V4qZdlu-JpE/видео.html
I tried using doing the roof technique but I kept getting a warning that I could not create the roof because the topo mesh was too complex and I need to simplify it. I was not sure how to simply it since it was an imported model and simply took that model and converted it from import. I can try using the other two suggestion you made. Thanks
By the way do you have any videos on creating custom geometric building shapes with precise angles/ slopes...
Kurds.