Thanks for sharing the extended draw screw post removal that's smart. I believe the Saturnus Chrony if it's calibrated. Have you done the calibration to balance the sense distance. It's adjusting the potentiometers so the sensors read at the same distance.
Nice, going to try copy the extended draw mate, but to fire stefan darts with a 12.5kg, then try adding another 10kg outer spring to see what it hits, but I'm going to wait for my metal hammer and trigger to arrive from China first.
1.5mm spacer to 2mm. 2mm is really pushing it. I didn't go bigger than 1.5 since I wanted to overprime a little bit so the forward tiny push would set the gasket against the cylinder.
I put 2 stock springs in my hammershot after I modded one for my buddy. With the ar removed and the gavinfuzzy cylinder, it's hitting about 80-85 which is good enough for me. Great job on this!
@Tripp Miller I look forward to it. I really like hammer action blasters, but they usually don't hit hard and I'm a noob at modding. But at the same time, I want someone to stick it to Walcom. (I like his stuff, but...he's too bias on the Hammershot)
Deadspace removal is always worth it to me. Even if it only nets a couple fps. It's another thing to do and get good at. Plus it glued the cap on. Lol and yeah, the gasket I saw a scrap piece of the rubber, and thought "hm" and it worked out perfectly. Foam made the readings all over the place.
@@Boomtendo4tw actually, only about half as much, and it puts alot of stress on the front of the blaster, since it's smashing the front of the plunger into the back of the cylinder
Optimizing stock plunger tube capabilities is viable, too. Cartaya's Ultra Match Series and his 194 fps Prophecy proves that. If you got a 130 fps on your stock PT, then maxing out a SledgeHammer would be scary. I can agree that XPT's are kinda an easier way, because of more peace of mind, albeit more shell cutting. Stock tubes persuade modders more into thinking outside the box to squeeze performance out of their blasters, like efficient plunger systems, lighter pistons, effective barreling and extending draw length. You must have Herculean strength, priming a 20kg hammer is ridiculous.
@@rickcupola6262 it's just my thumb. I can't do it for long. I used to not be able to to it at all, but I spent like a month with those hand press things, and it worked. If I go massive plunger, I'm gonna do some crazy stuff to it.
@@radioactivesdesigns3554 you mentioned you wanted something that was easyer to prime than that 20kg set up but more poke than the other spring you had. I believe the Turf one (at least the ozzy one was) is 9kg, but turf springs are notorious for giving more power than the draw weight would suggest 😉 So in theory you should get a lighter prime with a bit more output
@@akagainesy ah! Ok, I see what you're getting at. Would be interesting to see a middle of the road version. Something higher than 8 but lower than 20.. I mean there was only a 15fps difference. Or. Maybe i should go higher
@@radioactivesdesigns3554 yeah the difference is minimal. Like you say would be good to try something more than an 8 to see what you get. Would be too suprize if you not utilizing all the potential of the 20
lol if u gave ur chronograph meth probably, and honestly is it rlly worth that much work for that performance, especially considering its more of a secondary?
In another video I compared it to a stock boomco m6. That was also on half darts, and I got 154 in the video, and further modification brought it up to 165.
![[REVIEW] - Buzzbee Air Warriors Tek - 3 - Buzzbee Crap](/img/1.gif)
Definitely can't wait to see what this does on Elites with a brassed cylinder...
I'm hoping to not be able to use it in a superstock game when I'm done with it!
@@radioactivesdesigns3554 What's your SS limit? Ours here in the SDNC are (I believe) 200 or 250fps...
@@MishraArtificer superstock around here is 150. Anything higher is a mix of ultra stock and insanity. We have 250fps adult games.
Thanks for sharing the extended draw screw post removal that's smart. I believe the Saturnus Chrony if it's calibrated. Have you done the calibration to balance the sense distance. It's adjusting the potentiometers so the sensors read at the same distance.
I haven't changed anything since the day I got it. I'm not too savvy with stuff like that and I don't want to mess it up.
Nice, going to try copy the extended draw mate, but to fire stefan darts with a 12.5kg, then try adding another 10kg outer spring to see what it hits, but I'm going to wait for my metal hammer and trigger to arrive from China first.
1.5mm spacer to 2mm. 2mm is really pushing it. I didn't go bigger than 1.5 since I wanted to overprime a little bit so the forward tiny push would set the gasket against the cylinder.
I put 2 stock springs in my hammershot after I modded one for my buddy. With the ar removed and the gavinfuzzy cylinder, it's hitting about 80-85 which is good enough for me. Great job on this!
Well, I know who I'm not gonna thumb wrestle.
It's not just about strength. It requires tactical thinking, agility, coordination, flexibility. But strength helps. Lol
@@radioactivesdesigns3554 Btw, check out LUCHATHOR13's hammershot. He slapped a sledgefire plunger tube in his. Don't remember what fps he got.
@@captsomeguy1 I've seen it. Was gonna do that with something, but I'm gonna try something really crazy eventually
@Tripp Miller I look forward to it. I really like hammer action blasters, but they usually don't hit hard and I'm a noob at modding. But at the same time, I want someone to stick it to Walcom. (I like his stuff, but...he's too bias on the Hammershot)
@@captsomeguy1 well I definitely stuck it to him. 131fps. Not even endwar legal.
cool gasket. i like the dead space remove too. I just been too lazy to do that. i tried hot glue for dead space but didn’t seem to make a difference
Deadspace removal is always worth it to me. Even if it only nets a couple fps. It's another thing to do and get good at. Plus it glued the cap on. Lol and yeah, the gasket I saw a scrap piece of the rubber, and thought "hm" and it worked out perfectly. Foam made the readings all over the place.
Tripp Miller moving the draw forward probably makes the biggest difference I would guess
@@Boomtendo4tw actually, only about half as much, and it puts alot of stress on the front of the blaster, since it's smashing the front of the plunger into the back of the cylinder
wish Walcom would see this
Enough of y'all send it to him and he just might. Lol
Matt wish walcom would die;)
SledgeHammer XPT mod? It maybe could further increase the FPS in this one.
I thought about it. But it feels like a shortcut. Wanted to get the most out of the stock stuff.
Optimizing stock plunger tube capabilities is viable, too. Cartaya's Ultra Match Series and his 194 fps Prophecy proves that. If you got a 130 fps on your stock PT, then maxing out a SledgeHammer would be scary. I can agree that XPT's are kinda an easier way, because of more peace of mind, albeit more shell cutting. Stock tubes persuade modders more into thinking outside the box to squeeze performance out of their blasters, like efficient plunger systems, lighter pistons, effective barreling and extending draw length.
You must have Herculean strength, priming a 20kg hammer is ridiculous.
@@rickcupola6262 it's just my thumb. I can't do it for long. I used to not be able to to it at all, but I spent like a month with those hand press things, and it worked. If I go massive plunger, I'm gonna do some crazy stuff to it.
Have you tried an rival cylinders? I’m glad you’ve gotten some great results out of the mod. It finally has some real kick!
I do have a Rival cylinder. It performs below my expectations.
Magnificent
Just recently bought a bunch of hammershots and the Fortnite 6sh and am looking into upgrading the springs. Has the 20kg Hammershot lasted?
I've lowered the spring and increased the efficiency. It does 130 on stock spring now
How did you put on the plastic
How thick is the added piece of plastic on the hammer?
1.5mm, but this setup is outdated.
@@radioactivesdesigns3554 yeah man, I just saw the intermediate upgrade video. I think that's what I'll go for instead.
what is it getting with elites?
Haven't made a cylinder for that yet. It's on the to do list.
Tripp Miller try my boomco cylinder
@@Boomtendo4tw I'm definitely gonna try something with boomco darts.
See if you can get hold of the Turf hammershot spring 😉
Why? It ultra powerful or something
@@radioactivesdesigns3554 you mentioned you wanted something that was easyer to prime than that 20kg set up but more poke than the other spring you had. I believe the Turf one (at least the ozzy one was) is 9kg, but turf springs are notorious for giving more power than the draw weight would suggest 😉 So in theory you should get a lighter prime with a bit more output
@@akagainesy ah! Ok, I see what you're getting at. Would be interesting to see a middle of the road version. Something higher than 8 but lower than 20.. I mean there was only a 15fps difference. Or. Maybe i should go higher
@@radioactivesdesigns3554 yeah the difference is minimal. Like you say would be good to try something more than an 8 to see what you get. Would be too suprize if you not utilizing all the potential of the 20
@@akagainesy it might have something to do with the ultra darts themselves, or the 3d printed barrel. That's might be way I was hitting a plateau
lol if u gave ur chronograph meth probably, and honestly is it rlly worth that much work for that performance, especially considering its more of a secondary?
In another video I compared it to a stock boomco m6. That was also on half darts, and I got 154 in the video, and further modification brought it up to 165.
Tripp Miller unless u have like a 6 pack, the spring load may not be worth it, that’s probably the highest ive seen a hammershot go tho
A 6 pack on my thumb?
Tripp Miller lol ye i suppose, tbh idk y i started this, im just upset about being a dumbass and breaking the cylinder retention on my hammershot lol