Soldering pro tip: File or wire brush your soldering iron tip. Then coat it with solder. You may have to do it a few times during a job but it will help get your wire hot quickly.
Put a dab of solder on your iron's tip first, it'll greatly improve the heat transfer. Clean your soldering iron tip and it'll work better, carbon isn't that good at cooperating. Just some things from experience. LEDs sure make lighting easier.
I have a question, I have an rmz450 which doesn’t have a battery but I don’t want to sell it and buy a new one with electric start and all that, just was wondering I’m not good at electrical stuff but Ive been wanting to set a battery with a regulator if anyone can help with that
You're gonna have to beef up your magneto to a higher wattage and then add a regulator/rectifier to turn the bike's AC voltage to DC. Then that output will go to your switch and from there to your light. You may get fluctuations of brightness in relation to the rpm The first time I tried doing this without all the correct pieces I fried the lights, didnt realize the power was in AC.
![Dirt Bike Lights Using Cordless Tool Battery [How To] Updated video!](http://i.ytimg.com/vi/ZyBoxAlFte8/mqdefault.jpg)
Soldering pro tip: File or wire brush your soldering iron tip. Then coat it with solder. You may have to do it a few times during a job but it will help get your wire hot quickly.
Came here from motor madness 😂 old man was crazy
Put a dab of solder on your iron's tip first, it'll greatly improve the heat transfer.
Clean your soldering iron tip and it'll work better, carbon isn't that good at cooperating. Just some things from experience.
LEDs sure make lighting easier.
If you use the tip of the soldering iron it will solder quicker
How long dose the battery last Without an alternator set up do you just want a battery and then recharge it when it gets low
This man helped me out
How well did those hold up? Trying to make a decision between these and just spending the money for Rigid/Baja.
did you put an inline fuse in it?
They will vibrate all over the place.You need to use both bolts on your clamps.👍
So would these make the bike street legal?
Could I use this headlight to get my bike stream legal?
Yea
No
The tires do you go off road with those cause if I did with those I would die
how was this for 20.00?
It was 20$ for him, for anybody else doing the same thing he did… it would be close to 200$ he clearly missed a 0 or clickbaited
The brake line looks like it's gonna hit the light when compressed.
What's the weigh per light? It's not in the details
I can see the weight of this light bouncing all over the place with the thickness of the bracket and the single mounting point...
I have a question, I have an rmz450 which doesn’t have a battery but I don’t want to sell it and buy a new one with electric start and all that, just was wondering I’m not good at electrical stuff but Ive been wanting to set a battery with a regulator if anyone can help with that
I have a similar situation going on😂
Same situation with XR250.
You're gonna have to beef up your magneto to a higher wattage and then add a regulator/rectifier to turn the bike's AC voltage to DC. Then that output will go to your switch and from there to your light. You may get fluctuations of brightness in relation to the rpm The first time I tried doing this without all the correct pieces I fried the lights, didnt realize the power was in AC.
BRUH MAKE MORE VIDS DAMMIT
Yessir!
LifeOfBike u better
Very good video thanks heeps
Dude...get a mic for better audio.
Rip. Heard evan died today
The guy who is in the vid?
@@seantalas2574 yup he is deceased
Dang, what happened?
@@brockclouser1500 whyd he post on Instagram a few weeks ago then
@@rhex8440 it’s his ghost