Setting Bobbin Tension - Butterfly Embroidery machine training video (Ajuste de la bobina)

[@robynlindsey3]

Fantastic video. I am a beginner at using my machine and was nervous about correcting the bobbin tension. This video gives me the confidence to do it on my own. Thank you for such clear directions and helpful illustrations.

[@blessingthompson2547]

I was having problems with my bobbin tension and just ordered a gauge, I decided to see if RUclips had any videos on it and found this video and was able to fix the issue. Thanks for sharing! Now I wish I had check here before ordering the bobbin gauge. Haha.

[@__-hh3gt]

One of the best videos for checking bobbin tension, start from lose and tight little by little till reach the steady point. Dramatically fantastic. Thanks

[@soyborne.bornmadeandundone1342]

exactly. It does work. This video is great! Fuck my 50 dollar tension tester lol. That thing is apparently not as good as this method. That or my tester is broken...

[@soyborne.bornmadeandundone1342]

So I was yelling and acting like a huge jerk because of my tension problem.
This video solved my problem. I finally FINALLY have a good way of getting pretty accurate tension. Thank you sooo much.

[@meenufnow]

Very good tip on just tight enough to hold the bobbin without running. Thank You

[@tejendrapradhan2837]

Watching this video I learned a lot regarding thread tension.Thank you

[@joanmbergren]

Excellent. Clear and concise. Thank you.

[@ButterFlyEmb]

1. Make sure top tension matches bottom.
2. Make sure top tension is smooth when you pull it, not ragged feeling. Same with bottom.
3. Leave a few inches hanging from bobbin when you replace.
4. Make sure your needle is not backwards. Make sure it is all the way in. Make sure it faces forward, not at an angle. Make sure it is sharp, not mushroomed or burred.
5. Make sure you can pull yards of top thread without hitching.
6. If another color works, then check needle depth and hook timing.

[@egmegm8919]

I have not been able to do the drop test as my bobbin falls right out of the bobbin case when i release it. Tried to tighten the larger screw and now it won't lower at all :-( What could be the problem ?

[@suzanparrish3560]

Thanks so much for a very good tutorial!

[@annlysak3414]

thanks a million!!! you are soooooooooooooh helpful!!

[@Danofnj]

Great video....you helped me sooooooo much!!!!!!!!

[@RANA-zu1yj]

hi

[@shahlavahidian1912]

I have a sewing Machin , OMEGA 750 , the bobin is very full more than normal, it stocked in the machin, I opened and got all out , now the bobbin is stocked and comes not out of, do not know wat to do now

[@sewquaint]

Thanks so much 🙏🏽

[@fabiolaasencio6114]

megusta que suvieran los vídeos en español

[@shafikshafik9570]

nice