BUILDING A RACE CAR OUT OF THE WORST CAMARO EVER!
HTML-код
- Опубликовано: 4 апр 2024
- #CASEYSCUSTOMS #HOTROD #RATROD#KUSTOM #RACECAR
Building a race car out of the worst Camaro on the planet, and we finally drive it!! It doesn’t go great…
⬇️CASEYSCUSTOMS MERCH⬇️
caseyscustoms.com
CHECK OUT THE 2ND CHANNEL FOR EXTRA VIDEOS! ⬇️⬇️
/ @caseyscustoms2
BECOME A CHANNEL MEMBER!⬇️⬇️
/ @caseyscustoms
ANTIGRAVITY BATTERYS!⬇️⬇️
(CC10 10% OFF!)
antigravitybatteries.com/ref/66/
HIT THAT SUBSCRIBE BUTTON!
I Finally got a P.0. Box! Send me mail, stickers, merch, anything! If enough shows up I will open it on camera! Thanks!!!
Caseyscustoms
P.O. Box 819
St.Joseph MO 64502
Stay tuned for more vids!
If you like this vid please like, share and subscribe!
It means a lot and helps the channel grow!
Also check me out on Facebook, Instagram and tiktok! 👇👇👇
/ caseyscustoms
caseys.customs?...
www.tiktok.com/@caseyscustoms... - Авто/Мото
Honestly what else would we expect from this freaking car?!? PLEASE LIKE THE VIDEO!
Hell yes get this p.o.s. on the road again!!! Even if you throw the driveshaft out 😅 oh well drift car baby!! They don't care abuse the fuck out of it.
Casey, how can I get a hold of you
@@bigheadedmartian shoot me an email caseyscustoms@yahoo.com
Hey did you put those c clips in the driveshaft last time I did that the bearings popped out from and and drive shaft went flying on the highway f up my mufflers bent the driveshaft an all that and my 90 ranger got less then 120 torque on her but ya probably threw them on off camera
My area the drive shaft was 450$ new and the junkyard shafts were all bent from 4cliff drivers so I just cut one up and got it welded it ain’t perfectly balanced tho😂😂
Also just joking about firing Richard, the damn cop is basically family now.
Keep Richard the videos are better with him
I too prefer Richard's style
jeez Casey you scared me. i love Richard 😂
get richard in the shop getting his hands dirty 💪💪
You should make that blue canary help you build something stupid/crazy (1000hp bumper car hint hint)
CASEY, I KNOW THAT THE CAMARO IS ROUGHER THAN YOU EXPECTED, BUT, I CAN SEE YOU HAVING LOTS OF FUN WITH IT NOW! Actually, how you fixed it is really a cool way to quickly salvage a unibody type car in a rush. Great job Casey! Anyway, thanks for the video 📸.
In today's episode, Casey welds his happy little ass off
⚡️⚡️ 😃 🫏
Richard the cop, is the best with his own inputs!
Both Editors are great! I can't pick sides! 😅
I saw a snap ring hanging out of the rear u joint.....
I'm not gonna lie when the driveshaft let loose i was lmfao ‼️🤣😂 💯
Me too at first then i thought it might hit me cus the car is such a piece of shit 🤣
AWESOME video!!! Love the comedy BUT miss Richard’s editing with his emojis and funny write ins!!!
I’ll be back on the next one!
He just had some cop stuff (donuts) to get to this week, he’ll be back.
Man that car kicked your butt lol
You aint wrong lol
I think the front and rear glass was 85% of the cars structural rigidity lol
I think you are 100% right lol
Cassey - top tip for when ever you cut yourself, use super glue. 👍 it stops the bleeding and seals the wound.
Rear diff - top tip. For drifting, weld the diff. So this will allow you too get the power too both rear wheels. 😄👍
Love your builds 😉
Please don't be mad at your Dad. He was just trying to help you
I’m never really mad at him, just busting his balls. We have a great relationship so we talk a lot of shit lol
From the look of Pole Barn's car you better hope it doesn't turn into a "rubbing is racing" event because he's got 60% more metal than you do lol.....
Most youtubers falsely claim to have bought "the worst" whatever. Now they are all holding Casey's beer keg.🍺
This fucker may not be the “worst” ever, but i bet it’s damn near the worse ever on the road lol. There’s literally nothing but my cage holding this bitch together now 🤣🤣
Paint it a bright orange
A 5 speed from a two wheel drive jeep Cherokee might fit pretty good. Also it should be cheap i imagine.
Love you vids Bro!!!! Keep it up
Now this is something u wanna turbo paint in an out
That would go hard
Yay a new video, I am so going to enjoy this ! THANKS
Idk if you've always had it never noticed I noticed until now. Killer sound during time laps. I was turning it up head bobbing. 👍🏾
Judging by the body, you wouldn't expect to have that much rust... amazing how bad it is
That’s a great tip on the brake line crush washer
I wanna see you weld the diff on this clapped out pos. Let that thing really eat around corners
I’m thinking the same
@@CaseysCustoms Isn't that against the rules ?
@@CaseysCustoms Can't wait to see it man! Keep that head up
Yes it is 🤣 😄 @@NoWr2Run
@Caseyscustoms Great music tracks on this one. Very cool stuff! Artist? Great build man!
Yeah, I'd like to know as well.
Great videos hope you keep up the interesting content. ❤
My first car was a 79 Camaro, always love to see those 2nd Gens!
My new favorite car on the internet. Please let us see you rip it on the track when its done. I need an episode of shitbox racers please.
It's only running on 6-7 cylinders maybe even 5 !!!!! Make it run good!!! And try and keep the parts on it !hahhaha😂😂😂 this was funny
Lol thanks for sharing ! Absolutely things happen !😂
Bro I really don’t think they would have let you put that car on a race track of any kind. That joint looks good but Lawd it’s pushing way past the cringe factor there. Be safe bro and keep them videos coming. Love your content.
HEY CASEY, THE MORE YOU WORK ON IT, THE MORE I LOVE 💕 THIS CAMARO! It's a perfect fun car! Just thrashing around town with it or to race off road with it, it's very versatile car to have some fun 😊 with. It's was cheap and will be a fun ride for you Casey. Anyway, thanks for the video 📸.
Let's go baby
Please do a custom spray job on the Camaro plz Casey. Love this channel.
Man, the giveaway stickers on this thing are gonna be like 56 cents a piece.
🤣🤣🤣 this made me spit my drink out lol
That thing is a death trap!
Keep doing what you do Casey!! Coolest builds ever!! I hate this car so much lol! It's like Def Leopard cool. There are a few things missing, it's got a generic sound and look, but it's still on the radio. I'm really stoned lol.
That "new " master may have been built 25 years ago, and has been sitting on a shelf ever since. I've seen this happen many times before with old stock like this. The seals get all dried out. Or it gets rust and crap in the piston bore. Just because something is labeled as "new" or "rebuilt" doesn't necessarily mean it's any good.
The prop valves like to slide over to all front bias, lock and not bleed when you have the rears unhooked or pressure loss somewhere.
Cool video. That 55 Chevy though...😮
Great editing, the best sounding music you've ever had. Great build
Hell yea Casey
Racecars have to have a firewall between the fuel cell and the driver along with the battery can't be sitting next to you man you did a lot of work I seen the video of the front end falling out awesome work melting back together
looks like rear end is back farther ..making drive shaft short? love the videos keep it up
Wire the alternator through the shut off switch
I couldn’t even tell it was a different editor. They both do a good job
Damn bro, it does seem as though the Camaro has grudge against you 😂
Please don't give up on it, I still think it would be cool drifter.👍🔥🔥
Two different piston depth on those type of master cylinder. New one might have been deep design. You're a hard worker enjoy watching your projects.
Nah unfortunately just bad, it came with the extension rod if you needed it, ours didn’t. After i swapped it i did an air test and it had a bubble leak, meaning the piston seal was either ripped or torn. Good times lol
Aww it’s entirely up to you but richard is just as good and funny. I did notice less humor and jokes, richard is hilarious!
Love your videos I have a 77 trans am runs great needs a little suspension work do you do help work
I just watched Dalton's video earlier. From the sounds of it, they will be racing again soon! Dalton wasn't very happy with how his wagon performed and now Kevin from Junk Yard Diggs wants to build and race a car! I'd love to see this thing on that dirt oval, I bet she'd grip shit and get!!
If you have no reverse, the transmission would eventually go out because reverse is the highest pressure to gear.
This build reminds me of Chris birdsongs super bee ter he just built. Rotten car, roll cage to restructure it. Have fun with it till it dies
😂 that’s the biggest POS you’ve worked on. Hope you have lots of fun tearing it up on the race course.
Top notch editing brother!! I expected the dramatic ending,you slung the shaft outta her!!
Did you ever change the rear leaf springs
Cant wait tell your back on the 50 chevy
I do everything one handed left hand amputation when 17 can still do everything
I like Richard's editing much better. He adds the sound and visual effects that make the videos more fun to watch. I think we all LOL at his selective censoring.
From the outside looking in... That thing just doesn't want to live
Other than some tweaking here and there, she is ready for a turbo LS swap!!
Fuckkkkkk that lol
The new Christian
Hope you finnish welding the roll cage well its your life and fixing the drive shaft that would be good to.
I've had more problems with new master cylinders than any other part.
This one seems like more work then the usual body/engine swap. I never liked that body style Camaro, but it's starting to grow on me after watching this build!
I like both edits.
I enjoy the choice in music more in this video but I do like Richards editing style though.
I read on a previous video that the owner should have paid you to take that POS and not the other way around. Oh boy, after today's video? That sure does sound about right!😂
I am moving from New York back to Colorado... hoping to team up with some other you tubers and do some races and shows. Going to be a little while till I get move done.
Clicks on RUclips app. First video that shows up not even thinking this video would be out today. Gives out a YESSS!💪💪 thank you for making such enjoyable content, you are much appreciated!
It took awhile to upload but we got her done! Thank you so much for watching
I know what happened to the drive shaft you forgot to put the little confused clip on caps
My vote is for Richard he brings a certain something to the videos
I’m in no place to say cause it’s your car, but if you plan on drifting it you should have modified the front end for more angle/camber etc… while you had it all apart.
Love the vids keep smashing out the content brother!
That’s coming!
Badass foo👍👍👍
Amazing you got that turd to drive under its own power and do a burn out. That trans is toast but still gets you down the road, they dont build them like that anymore.
That’s supposed to happen 😂
LOL , amazing video
This car wanna rest in peace under the tree.... but nooooo, heres it comes Caseys😅
She needs a welded diff and a 5 speed manual 😉 keep up the good work casey 🤙🏾
I think welded diffs. are illegal.
@@NoWr2Run what people don't know, won't hurt them! Definitely illegal here in aussie but it's never stopped me 🤷🏽♂️
It would have been the best lookng race car if it would have worked. Put a full tube frame in it. connect the whold subframe maybe thats why the drive shaft fell out??
Hey Casey, I have a 1988 Acura legend I'm thinking of body swapping with a dead 1953 Plymouth Cranbrook or an early 60s falcon. What are your thoughts on this? Be as brutal as you want and give your honest opinion.
I like the idea. The Only thing i would question is why a 1988 (i know you have it already but i mean in general) an 88 Japanese car isn’t powerful, doesn’t have stylish interior and isn’t very strong. It’s definitely still doable, just a lot of work for a “meh” chassis swap. If it was a 2008 Acura i wouldn’t question it one bit
I like the new video but I miss all the extra shit Richard puts in like the little clips but I also love / hate that Camaro haha makes for a good watch thou keep doing it up Casey I always look forward to you videos man one of these day I need to order some Merch and get something to hang up in my shop
Everyone already knew casey was mad but this entire project just drives the nail in...
Cragars......approved! 👌
Good idea the old knee pads!
Hey what up with the 55 Chevy?
To me the old slotmags looks better on the car. I think the slotmags needs to Come back on front,and buy some 10 inch wide cromspoke steelies for the back. And ad some patina'd 80's hockey stick stripes on the sides
12:49 whys the wheel look so far back in the wheel well. Im posting mid video so maybe you address it but im impatient
This needs to get painted yellow with black stripes
On the editing question, I wear head phones and the music is a little to loud, or your voice is to quiet. lol
That’s an editing mistake, i kinda noticed that too lol
In another life and another build you could have probably pro streeted it, tubs etc . There was f all to cut away lol
did you bench bleed the master cylinder first?
Awesome. ThAwesome.
Inside clips missing on the ujoint caps...
Gonna be a fun car when it´s done. You should have a headphone warning when the music comes on. Damn that was loud compared to when you speak.
This car may be a POS but you seem to have fun turning it into a beater race car. Rock on!
I never liked the 1970's Cameros! The only thing good on them were the titanium bumbers.
The Shitte Box 2nd Gen
He should paint it dark brown.
Id take that car in a heartbeat !! AND daily it ! love it- had a 79 z28 same color. 😃👍👍👍👍👍👍👍👍
I could tell Richard didn't do the editing no funny pop ups or jokes it was different and it was ok but it wasn't a Casey's custom original in my book
You cant can that damn cop he is funny and dose great edits 😂😂😊
Keep working on it