Dude, you just saved me a crap ton on a mechanic. Thank you so much for the video, it was easy to follow, and very descriptive, which is what I needed.
This guy did an amazing job at showing this off, not too fast, not too slow. Multiple angles, real time motion and paused actions for context, and tips so you don’t have to redo something.
Excellent video! 2nd time I used it. 1st time to replace burnt out bulb and just now to replace both headlights to get rid of condensation in drivers side. They fit tight but with your clear instructions we got the job done. Thanks Chevy!
Thank you for your excellent demonstration. My low beam headlight went dead on my 2009 Chevy Cobalt and needed this video to show me how to put in new one. Now it's fixed and figured I'd drop a line expressing my appreciation..
Wow, I wish I could like, then unlike this video just so I can like it again! Superb demonstration. I really appreciated all the different camera angles and closeups. Really made each step very clear. Thanks also for your tips at different stages. I'm feeling confident for this DIY thanks to you.
You are a life saver. Thanks so much for the simple clear instructions. My first time pulling out the entire headlight and it went perfectly smooth and went right back in place without a hitch.
Thanks a lot for this video! I found it BEFORE changing the bulb on my 2007 Cobalt LT so I could have some idea of what I was getting into and I had a second look during the actual swap as I didn't remember what you said or showed about how to free the old bulb from its connector. You make the entire process easy to understand and predictable.
Thnk you SO much for this! As a woman, I am always reluctant to ask a mechanic to do minor repairs because I know many of them will try to take advantage of women. This video allowed me to easily change the headlight bulbs on my daughter's car this morning by myself and avoid the cost and frustration of going to a mechanic.
Im so happy to be a part of helping u replace ur daughter's headlight bulbs🙂 and great comments like these motivate me to keep doing what im doing cause i love helping others.
Just did it! You did a great step-by-step presentation. I only did one bulb today due to time constraints...I will get the other done tomorrow! Great post.
This is very well done. Clear and concise instructions, good clear video, and these instructions worked like a charm on my '09. Thanks! Also, thanks for mentioning popping the clips out of the black plastic for wiggle room and pushing down on the bumper a little bit to get the headlight out. I worry I might damage something when I work on my own car but that advice reassured me to apply just the right pressure to get it done.
Thats awesome..im so glad u were able to get it done..yea i always try to add any tips and tricks that may help..thank you for watching and the support🙂
I'm definitely not a "car guy," but this video made me feel like one. It definitely wasn't as easy as you made it look, but it wasn't nearly as difficult as I thought it would be. This video helped make the process quick and, relatively, easy.
Where was this video 10 years ago when we first had to change the bulb in my cobalt? I remember it being a huge pain then, but this video was so simple, step by step with explanations - took us longer to locate the proper tools in our toolbox than it did to actually get the old bulb out and the new in! Thank you!
Great instruction video, well done. You helped me get to a project I've been putting off for weeks! One thing I'd like to mention. The gaskets that came with my bulbs were just a tad too large to fit so I cleaned off the old ones and reused them. Worked like a charm.
Thank you sooo much! I am very grateful for your videos. I have no boyfriend/husband and my dad lives far away, so a mechanic was going to be my next choice until I stumbled upon your videos. If you have more videos like this I will definitely subscribe!
Thank you so much:) these comments mean so much to me, nothing makes me feel better than being able to help someone save themselves money and avoid a mechanic:)
Thanks for a great tutorial ! I just finished replacing the headlight bulb on my 2007 Cobalt. Even though I watched it several times before I started, I still hit snags. But all I had to do was to come back and start watching your tutorial again to find the answer. Good work !
This is the third time I've changed the light bulb on my 2006 Cobalt each time I have looked at a RUclips because it is just a good idea. This is the FIRST time I have seen someone remove those two clips to "give you more wiggle room" at the very beginning of the video. It made removing and re-installing the unit sooo much easier thank you! Now if only the parts book listed the proper bulb I'd already be finished hahaha
@@backyardchevy328 No,my first hint was when I took the white blinker light out and noticed the one I bought at the big box store was amber. The voltage was different too and it would not work so I'll just take it back with the old one in hand.
Thanks man, got the passenger side first, took me like ten minutes( I had some trouble with it) then went to the driver side, took me five minutes. Very clear
Thanks for the help. I just changed a headlight for my 2006 Cobalt. Normally a first time is difficult with a lot of unanticipated issues, but it went smoothly.
Hola. Thank you. I am a female that does not have a boyfriend yet and will try to do this on my own. Due to your super clear and the different camera angles. I think it will all be well. Girl Power.
Thanks this helped me out a lot! He didnt put in there is 3 things on the side of the bulb you need to make sure is lined up if your having problems getting the light bulb into the hole!
Same here. I couldn’t figure out if the rubber ring sat on top of the cylinder or was supposed to be pushed in. I changed both bulbs tonight I think actually one is in and one is on top. Both sides retailing clips went on though. Stupid rubber ring things were a huge pain. But helped once I saw the grooves to line up. This was a much better video than whatever one I watched last time I tried to change the bulbs. Getting those push pins out changed everything!
Great tutorial. One thing though, on my daughter's car the bolts that held the assembly in place could only be removed with a socket and not a phillips screw driver.
No idea why anyone would give a thumbs down. It was done very well with clear instructions. Thanks
Thank you that means a lot to me🙂
Probably mechanics getting butthurt about not being able to rip people off for a 15-minute maintenance/repair.
It's the internet...
because chevy made changing a bulb as difficult as possible
True that. I am an original owner of a 2005 and just used his video to replace other HL replacement videos 'cause it is the best imo.
The way you explained every thing and went in close with the camera was perfect. Thank you
Thank you🙂
Wow! Thank You very very much!! I was struggling with this and ready for the hammer to help remove, lol!! Thank God for you!!!!
Hola. I did it! I'm so proud of myself! No men involved at all! All on me. Girl power! Once again, thank you!
Hola🙂 thats awesome..im proud of you too🙂
You learned from a man🤣🤷🏽♂️
@@damianescobedo1701 tell your mother its not too late to raise a smarter son lmao
Pride
Dude, you just saved me a crap ton on a mechanic. Thank you so much for the video, it was easy to follow, and very descriptive, which is what I needed.
Thats awesome🙂...thank you so much🙂
This guy did an amazing job at showing this off, not too fast, not too slow. Multiple angles, real time motion and paused actions for context, and tips so you don’t have to redo something.
Thank you🙂
Excellent video! 2nd time I used it. 1st time to replace burnt out bulb and just now to replace both headlights to get rid of condensation in drivers side. They fit tight but with your clear instructions we got the job done. Thanks Chevy!
Thank you for your excellent demonstration. My low beam headlight went dead on my 2009 Chevy Cobalt and needed this video to show me how to put in new one. Now it's fixed and figured I'd drop a line expressing my appreciation..
Thank you🙂 im so glad to be able to help..and i really appreciate u taking the time to comment
Wow, I wish I could like, then unlike this video just so I can like it again! Superb demonstration. I really appreciated all the different camera angles and closeups. Really made each step very clear. Thanks also for your tips at different stages. I'm feeling confident for this DIY thanks to you.
Thank you, comments like these always make me feel good about the work i put into my videos🙂..thank you for this comment and for the support
You can unlike then like again
You are a life saver. Thanks so much for the simple clear instructions. My first time pulling out the entire headlight and it went perfectly smooth and went right back in place without a hitch.
Thats awesome! Great job🙂👍....thank you🙂
That was so detailed anyone could learn from you, great job...
Thanks a lot for this video! I found it BEFORE changing the bulb on my 2007 Cobalt LT so I could have some idea of what I was getting into and I had a second look during the actual swap as I didn't remember what you said or showed about how to free the old bulb from its connector. You make the entire process easy to understand and predictable.
So glad to be able to help🙂 thank you
thank you brother that helped me a lot greetings from 🇲🇽
Gracias amigo y saludos🙂👍
Many thanks for this video! Loved the pace at which you did the video at and how you explained everything. Many blessings to you. ❤😊
Thank you so much, really appreciate the comment:) Thank you and many blessings to u as well:)
Thnk you SO much for this! As a woman, I am always reluctant to ask a mechanic to do minor repairs because I know many of them will try to take advantage of women. This video allowed me to easily change the headlight bulbs on my daughter's car this morning by myself and avoid the cost and frustration of going to a mechanic.
Im so happy to be a part of helping u replace ur daughter's headlight bulbs🙂 and great comments like these motivate me to keep doing what im doing cause i love helping others.
This is much more professional than others I have seen that cover this same content. Nice work!
Thank you🙂
Just did it! You did a great step-by-step presentation. I only did one bulb today due to time constraints...I will get the other done tomorrow! Great post.
Thats awesome🙂...thank you, really appreciate the support...hope the other one goes just as smooth tomorrow.
This video saved me over a hundred dollars! Thank you for showing me how to do the repair with clear and easy directions
This is very well done. Clear and concise instructions, good clear video, and these instructions worked like a charm on my '09. Thanks! Also, thanks for mentioning popping the clips out of the black plastic for wiggle room and pushing down on the bumper a little bit to get the headlight out. I worry I might damage something when I work on my own car but that advice reassured me to apply just the right pressure to get it done.
Thats awesome..im so glad u were able to get it done..yea i always try to add any tips and tricks that may help..thank you for watching and the support🙂
I'm definitely not a "car guy," but this video made me feel like one. It definitely wasn't as easy as you made it look, but it wasn't nearly as difficult as I thought it would be. This video helped make the process quick and, relatively, easy.
Glad u were able to get it done..great job🙂
Where was this video 10 years ago when we first had to change the bulb in my cobalt? I remember it being a huge pain then, but this video was so simple, step by step with explanations - took us longer to locate the proper tools in our toolbox than it did to actually get the old bulb out and the new in! Thank you!
Well its here now🙂 probably that always elusive 10mm socket lol..thats great though that u got it replaced so fast
Thanks man! The guy at O'Reilly's gave up and said I'd need a mechanic to do it. But this video was perfect. I did it myself!
That's great! Glad u were able to get em done🙂👍
Great instruction video, well done. You helped me get to a project I've been putting off for weeks!
One thing I'd like to mention. The gaskets that came with my bulbs were just a tad too large to fit
so I cleaned off the old ones and reused them. Worked like a charm.
Thank you🙂 thats awesome glad u were able to get it done...yea sometimes things dont fit as good as the originals
Just did both lights, followed his instructions to the “T” and it took me all of 40 minutes! Thanks!!!!
Thats awesome..glad to hear u got em replaced so quickly🙂...thank you...really appreciate the support.
Fuck chevy, 40 minutes to change 2 bulbs... Bad, bad,bad design..
Thank you for the simple, easy to follow video! No nonsense, just useful information. I appreciate you!
This Person Did a Superb job of explaining things in a Clear and informative manner. Thank you for taking the time.
Thank you🙂
I never comment on things like these but thanks to you I learned how to do my headlights great video and it only took me 15 minutes to do!
Thats awesome! Great job🙂👍...thank you
Thank you sooo much! I am very grateful for your videos. I have no boyfriend/husband and my dad lives far away, so a mechanic was going to be my next choice until I stumbled upon your videos. If you have more videos like this I will definitely subscribe!
Thank you so much:) these comments mean so much to me, nothing makes me feel better than being able to help someone save themselves money and avoid a mechanic:)
Thank you for this video, just changed my headlights today and was so simple and easy to follow! Great video.
Thats awesome..great job🙂...thank you for the support
Simple. Clear, and effective video that helped me with my light swap. Thanks man🤙🏻
Thats great🙂 so glad it was helpful..thank you
Thanks for a great tutorial !
I just finished replacing the headlight bulb on my 2007 Cobalt. Even though I watched it several times before I started, I still hit snags. But all I had to do was to come back and start watching your tutorial again to find the answer. Good work !
Thank you so much🙂 makes me feel great to know that my video could help u with any parts u got stuck on and get it done, im sure u did a great job🙂
Thank you for your demonstrations. Very clear and easy to follow. Good work and much appreciated!
Thank you🙂
The was really easy to follow, and simple to change my head light bulb. Thanks for the clear instructions. Thumbs up!
Thank you im glad it was able to help🙂
Thanks, that would've been an hour job for me but only 25 minutes with your tutorial. You da man!
Thats awesome🙂 glad to be able to help u🙂
Excellent tutorial. This was easy to follow and very good detailed explanations.
Thank you🙂
Perfect, thank you. Was able to do this watching the video with sound off - extremely high quality demonstration
Thats great! Great job🙂👍
This is the third time I've changed the light bulb on my 2006 Cobalt each time I have looked at a RUclips because it is just a good idea. This is the FIRST time I have seen someone remove those two clips to "give you more wiggle room" at the very beginning of the video. It made removing and re-installing the unit sooo much easier thank you! Now if only the parts book listed the proper bulb I'd already be finished hahaha
Thats awesome🙂👍 glad to be able to help..lol its not listed properly?
@@backyardchevy328 No,my first hint was when I took the white blinker light out and noticed the one I bought at the big box store was amber. The voltage was different too and it would not work so I'll just take it back with the old one in hand.
@@SailingWindGypsy yea definitely the wrong ones
That was just great. Thanks for the lesson it's very well shown and very appreciated. 👍👍👍
Thank you it means a lot to me when my videos appreciated
Great video for sure detailed , out of the hundreds of total car tutorial videos I’ve watched, the best explained!
Thank you🙂
And now my headlights are changed. Thank you so much for this tutorial!
Thats awesome! Great job🙂👍
Thanks man, got the passenger side first, took me like ten minutes( I had some trouble with it) then went to the driver side, took me five minutes. Very clear
Thank you🙂 so glad to hear u were able to do em...great job🙂
Thanks for the help. I just changed a headlight for my 2006 Cobalt. Normally a first time is difficult with a lot of unanticipated issues, but it went smoothly.
Thats great🙂👍 glad to hear it
Wow!! Thank You very very much!!! I was really struggling with this and ready for the hammer to help remove, lol!! Thank God for you!!!
Super helpful, and the different angles made it easier to see what you're doing. Thanks for doing this.
Thank you🙂
Thanks for showing the positioning of all the various clips, awesome tutorial.
Thank you🙂
You sir helped a fellow car-ignorant guy! Thank you!
Thats awesome! Great job🙂👍
thanks! this was a great visual, and the instructions were very clear and informative! super thumbs up!!!
This video was so helpful! Very clear instructions and perfect video footage to go along with it.
Thank you so much🙂...these comments mean a lot to me🙂
Thanks about the rubber seal . I did the same thing, wouldn't go in at first. Great video
Thanks. I got it changed in less than 5 minutes after watching this video.
Thats awesome..very fast🙂
Hola. Thank you. I am a female that does not have a boyfriend yet and will try to do this on my own. Due to your super clear and the different camera angles. I think it will all be well. Girl Power.
Thank you🙂...So glad to hear that ur willing to replace ur headlight..i have faith in u getting it done...let me know how it turns out🙂 good luck.
Great video, way better then the 1A auto instructional video.
Thank you🙂 i really appreciate it
Nice I've already done this repair and I did it faster with your video and learned! Did it in 15 minutes!
Perfect instructions - worked like a charm. Thanks!
Thank you🙂
Very good tutorial. Just what I was looking for
Helped me pass safety test for plate stickers, thumbs up!
Thank you🙂 so glad to be able to help
Thanks for the help! Saved me $300 bucks
So glad to be able to help🙂
Thanks dude it was so hard to find a good video 🙏🏾
Glad it was helpful🙂 thank you
Awsome, informative, straight through video. Thank you so much. This will help alot
Thank you🙂
Quality of video is perfect, thank u :3
Awesome video. I used as reference.
Great help. Thank you.
Thank you very much for this!
Very well shown and explained🙏🖤
Thank you🙂
Sir, you are a deity! Thank you!!
Wow thank you!, all the mechanics said itd be around 80 dollars in labor because they would have to remove the whole bumper for one light.
Glad my video was able to help u avoid that:) Thank you so much for your support.
Thats exactly why im now watching this video.
Thank you for your steps. Made it super easy
So glad to be able to help🙂
Had to change out the other bulb, went straight to this video I have saved and followed your easy steps again
Thanks this helped me out a lot! He didnt put in there is 3 things on the side of the bulb you need to make sure is lined up if your having problems getting the light bulb into the hole!
Thank you🙂
Same here. I couldn’t figure out if the rubber ring sat on top of the cylinder or was supposed to be pushed in. I changed both bulbs tonight I think actually one is in and one is on top. Both sides retailing clips went on though. Stupid rubber ring things were a huge pain. But helped once I saw the grooves to line up. This was a much better video than whatever one I watched last time I tried to change the bulbs. Getting those push pins out changed everything!
Thanks for the video, I have to do this Saturday.
Holy crap this was so helpful as heck thank you :D!
Thanks so much. This channel is super helpful.
So glad to hear it🙂 thank you
Thank you for this video it helped me out and was able to do this for just $18 ! Very easy to do and video was great 😎👍🏼 thank you for each step too!
Thats so cool🙂...glad the video was able to help u out...thank you, and thank you for ur support🙂
Simple well explained guide, thanks so much! :)
Thank you🙂
Acabo de cambiar la luz del carro, ni puta idea tenia de como cambiarla muchas gracias 👍👍👍👍
Muy buen trabajo!..Gusto poder ayudar🙂
Wow very precise and clear thank you so much!
Thank you🙂
Nice! Thanks for making so easy!
I appreciate the camera angle on replugging it in
Glad to be able to help🙂 thank you
Thank you so much for this video. So helpful!
So glad it was🙂 thank you
Outstanding DIY video! Thank you.
Thank you🙂
This has been very helpful. Thank you.
Glad to hear it🙂 thank you
Helped me twice. Both my bulbs went out in a span of a month of each other 😅
Lol yea that does happen...glad to be able to help🙂👍
Thank you so much! You're a great teacher🤘
Glad to be able to help🙂 thank you
Thank you. This was very helpful, with the detailed explanation and camera angles!!
Exactly the video I was looking for
🙂 thank you
Thanks for the great video man, helped me out. :D
Always glad to help🙂 thank you for watching and for the support
Thanks this videos was detailed and professional great job👍
Thank you🙂
This video was a lifesaver 😊❤
So glad it was helpful🙂 thank you
Thank you so much! Easy to follow, made replacement a snap.
Glad my video could make it easier🙂..thank you so much...and thank you for ur support
Yes!!! Excellent, easy-to-follow video! Thank you!!!😁
Very good video. Thank you very much for this, it is very helpful and greatly appreciated. 👍👍👍
Thank you for watching and for ur support🙂 so glad my video was helpful🙂
Ditto
Very good instructions. 👍👍👍
Thank you🙂
Thanks for sharing! Great vid! 👍🏻👍🏻
Thank you🙂
Good shit bro, thank you!
Thank you:)
Thanks for saving me hundreds of dollars not going to a mechanic!! So much better to do it yourself.
Thats great! So glad to be able to help🙂
Great video…..thanks for sharing
Great job and thanks for the help!!!
Thank you🙂
Easy, good instructions!
Thank you🙂
Wonderful tutorial... only reason for people disliking is because this is one of the most cancer bulb changes ive ever seen in my life.
Thank you🙂 i really appreciate it
Very good and informative 📹 video. Thank you.
Thank you🙂 really appreciate the support🙂
Thanks man helped a lot
Glad to be able to help🙂 thank you
Great tutorial. One thing though, on my daughter's car the bolts that held the assembly in place could only be removed with a socket and not a phillips screw driver.
Just used your video man, thanks a lot 👍
Thank you for watching and the support🙂
Great video👍🏼👍🏼. It helped out a lot for me, thank you
Thank you:) Greatly appreciate the support:)
Thanks so much for this!
Glad to be able to help🙂 thank you for the support