😂 I’ll try and save some.. see you on the 19th, you can show us the hotspots and can take you on one of our other fields if you fancy a change of scenery😊👍 will make a good episode
Of course oldplucker I was running general 5 region all tones and lowering the first segment to quiet down the 1’s and 2’s Normal and simple profile Ferrous volume 3 Recovery 5 sometimes 4, in high iron spots 6 Upper ferrous limits 7 Lower limits 0 Sensitivity to suit your land but I’m happy on 28 Noise cancel and I don’t generally ground balance. No stabiliser or filter You will dig iron to start with and I’d recommend to just turn on the machine and go, start with a low sensitivity of around 22 to get the feel of the machine. When you get your ear in by calling the iron after you’ve dug loads of it you should click and be able to leave most stuff but deep targets can sound like iron but there will be enough info in the tones to make you dig. I’ve only just scratched the surface and it’s an interesting machine to learn! Happy hunting and good luck👍
Not sure, I’ve had this plenty of times with the D2 but first with the manticore. Only thing I havnt done is clean coil cover and it was a very wet field so something was going on.. a lot of big powerlines close by also
Lovely spot and cracking finds. Sorry for your loss ❤
Thank you🙏🏻
Nice finds. Thanks for sharing.
Thanks tnsharpshooter, keep up the good work
Nice finds mate, sorry for your loss
Thank you DMDC🙏🏻
Great finds mate and I know that pinpointer is good but it’s like listening to Sooty and Sweep lol 😂
😂😂
You will never listen to that pinpointer the same way again lol
@@Crypto_Sim_Racing 🤣🤣 B*^***d
Done well there… I think you have a purse bar fragment 👍🏻 we are coming down on the 19th of January if there’s anything left😜
😂 I’ll try and save some.. see you on the 19th, you can show us the hotspots and can take you on one of our other fields if you fancy a change of scenery😊👍 will make a good episode
And yes it was a purse bar fragment, I had it under the big tree your dad was in close to where we were chatting😊
Sounds good mate look forward to it 👍🏻
Great day. Can you put your settings up. I have just got my manticore? 👍
Of course oldplucker
I was running general
5 region all tones and lowering the first segment to quiet down the 1’s and 2’s
Normal and simple profile
Ferrous volume 3
Recovery 5 sometimes 4, in high iron spots 6
Upper ferrous limits 7
Lower limits 0
Sensitivity to suit your land but I’m happy on 28
Noise cancel and I don’t generally ground balance.
No stabiliser or filter
You will dig iron to start with and I’d recommend to just turn on the machine and go, start with a low sensitivity of around 22 to get the feel of the machine.
When you get your ear in by calling the iron after you’ve dug loads of it you should click and be able to leave most stuff but deep targets can sound like iron but there will be enough info in the tones to make you dig.
I’ve only just scratched the surface and it’s an interesting machine to learn!
Happy hunting and good luck👍
Thanks very much I will note those and give them a try. Only my third time out with the beast.,
👍
at 10:00 its dropped on edge inside the hole again ?
Not sure, I’ve had this plenty of times with the D2 but first with the manticore. Only thing I havnt done is clean coil cover and it was a very wet field so something was going on.. a lot of big powerlines close by also