Corrosion on pins is not caused by rain water! Check your coolant temperature sensor for corrosion causing coolant to capillary through wiring harness to ecu
Had a used ECU installed/ then was locked out from starting vehicle after attempt by tech PLEASE HELP...dealer wants me order entire dashboard cluster/keys/lockset & ECU, then re-program....isn't there a way to unlock it & re-set it through the software ODIS...I don't understand how the veh locks out both the original ECU now OR how the replacement will not work....veh starts/stops....repeatedly with the replacement that was purchased from a salvage yard. I need help. Originally, the Catalytic Convertor was stolen in Feb 2024, replaced, car ran fine, then check engine light came on, before inspection due end of June. Was informed by mechanic ECU was bad - needed replacement, then the aforementioned has since occurred. End result non functioning PASSAT. I NEED YOUR HELP BADLY
hi all i have a 2005 diesel model, i have moved my ecu to behind the left hand headlamp, very easy to do as the wiring is long enough already, one ground wire to move to a different ground point and thats it ,
hello, I want to ask you, if the ECU of the vw passat cc 1.8 has been cloned and the engine does not start, what should I do? please help me to understand 🙏
When you replace ECU with used one, ODIS asks you: "Which ECU is currently installed? NEW / OLD" ... If you use USED ECU, do you have to select "OLD"? Thanks.
i have the same problem p2015 in my Passat cc CBAB. Me i changed All this parts to New parts. * The intake manifold New. * The EGR valve New. * V157 New. All this parts but the code error P2015 still on . I delete it with VCDS but After 2km returns again !!!!! ;(( ;( What i Can Do in this case for P2015. Can you help me please . Thank you Regards
Corrosion on pins is not caused by rain water!
Check your coolant temperature sensor for corrosion causing coolant to capillary through wiring harness to ecu
Had a used ECU installed/ then was locked out from starting vehicle after attempt by tech PLEASE HELP...dealer wants me order entire dashboard cluster/keys/lockset & ECU, then re-program....isn't there a way to unlock it & re-set it through the software ODIS...I don't understand how the veh locks out both the original ECU now OR how the replacement will not work....veh starts/stops....repeatedly with the replacement that was purchased from a salvage yard. I need help. Originally, the Catalytic Convertor was stolen in Feb 2024, replaced, car ran fine, then check engine light came on, before inspection due end of June. Was informed by mechanic ECU was bad - needed replacement, then the aforementioned has since occurred. End result non functioning PASSAT. I NEED YOUR HELP BADLY
帕萨特B6 还是什么车？
hi all i have a 2005 diesel model, i have moved my ecu to behind the left hand headlamp, very easy to do as the wiring is long enough already, one ground wire to move to a different ground point and thats it ,
Are you using Odis s or Odis e?
hello, I want to ask you, if the ECU of the vw passat cc 1.8 has been cloned and the engine does not start, what should I do? please help me to understand 🙏
What program are you using to flash the ECU?
Odis
"Lets go ahead a do it!" :)
It is possible to adapt used ecu on any vw car?
When you replace ECU with used one, ODIS asks you: "Which ECU is currently installed? NEW / OLD" ... If you use USED ECU, do you have to select "OLD"? Thanks.
Hi, have you solve this issue? I have the same doubts. Thank you
hi
i replaced tcm on audi q5 with anothe used one. and i have odis engineering. but it's not accept it .
I have a 2014 jetta and am trying to program it with autel scanner you think I can program it with it?
I have 2020 e-golf can you re program
Ecu ?
I have odis but i don’t have online coding
I am having issues with my ECM with my Jetta TDI 2011. Any place where I can get a new one cheap?
hi sir.i have question.how can acces to online program.by using may autelmaxis mk908?thank you
how to put the vin number from the used ECU to get yours in it? and does odis take out the immobilizer active in the cluster
thanks
I have th same question
Čau. Kādu softu pielieto?
I have dame problems with my ECU. Thé car cannot be start because of corrosion water. My car is 2006 passat 2.0 FSI ENGINE
Hi I’m wondering how you know if an ECU can be cloned or have to use online coding?
As in is there a search you can do?
Hi, are you using AVDI?
You can clone with hextag factory mode, you can also dump ecu with k tag and edit immo data
And how do you upload it once you edit it ?
@@quickcutchase with KTag
how to program ed17cp44 ecu with car
i have the same problem p2015 in my Passat cc CBAB.
Me i changed All this parts to New parts.
* The intake manifold New.
* The EGR valve New.
* V157 New.
All this parts but the code error P2015 still on .
I delete it with VCDS but After 2km returns again !!!!! ;(( ;(
What i Can Do in this case for P2015.
Can you help me please .
Thank you
Regards
Hi can you come also in Danmark
How can I have the online access?
VAS6154 and ODID
@@modrix Thank you so much but how i didn't found the online access.
I hope you will answer did you adapt a used ecu?
yes
Can I ask what software you have used on your computer, as I have the same issue, and do not seem to be making much progress
ODIS
@@modrix Thank you for responding, very much appre4ciated.
What cable do youn recommend for connecting to the car??
Can adapt my car skoda Fabia
Hi, nice video and informative. How to get online account?
Thank you so much sir, what is the scan tool do you use ?
VAS6154 with ODIS
Yes ODIs
Going safe mode
Super
My opinion is better to clone the old one.
Great
Hallo sir please send me all car odometer pinout
Abrites or magicmotosport