there are 2 buzzers.. Remote annunciator is P400 main panel is P198 both are in level 4... However remote annunciator can be control in level 3 as well, just login -->manu--> Diagnostics-->remote sounder inhibit--> ON
Install mode is usually activated by fire alarm tech. The purpose is if you have many known troubles, instead of scralling through them, you combine them to 1 trouble call install mode.. RUI Trouble is wheather the remote annunciator not connected properly/ failed/ or main CPU board dont see the annunciator class A wirin..Trouble point you have to clerify better..
Excellent
Thanks
Pls explain about RIU , SPS' RPS' XPS' AMPLIFIER, ID NET CARD , PHON JACK CARD , etc....
What about troubleshooting if the printer cannot running auto (use epson lx310)
how many loops are available for sensors in the master bay?
Who can change smoke detector if have before other model for example before 4098-9717afte we want 4098-9717
Explain about flex trouble
How can we clear ID CARD ground fault
How can i automatically mute the buzzer while the troubles appears in the system?
status on P236
hold on P43 ?
Or somehow else?
status on
p236
track off
p43
there are 2 buzzers..
Remote annunciator is P400 main panel is P198 both are in level 4... However remote annunciator can be control in level 3 as well, just login -->manu--> Diagnostics-->remote sounder inhibit--> ON
one of these panels had over 600 faults.
had to rip the entire system out and put a better system in
please we have probleme in our building " semplex" if weather umid he beeping tou mush, what can i do?
BEN BELLA Press acknowledge
@@LasVegasEASPhoto8 :I press a knowledge boton, but after two minut cam back again!!!!! 🙏
BEN BELLA press trouble acknowledge
disable the detector
Make vedio on single single device disable
لو بالعربي تبقى خدمتني
THATS THE PANEL IN ROBLOX!
Pls tell me how to connect RAVEL fire alarm system
plz subcribe me if you want know about fire alarm system
good how to add new address for s detector
you must have a programmers dongle to add new detector
How to programme switches
You need the ES Programmer software to do that.
check my channel for all 4100ES programming
I am stayl 7 ?
Hi, pls explain the reason of the repeated test abnormal alarm in simplex 4100es
install mode active trouble point
abnormal
simplex 4100es fire alarm
simplex 4100es fire alarm
master class a rui trouble
trouble point
abnormal
Install mode is usually activated by fire alarm tech. The purpose is if you have many known troubles, instead of scralling through them, you combine them to 1 trouble call install mode.. RUI Trouble is wheather the remote annunciator not connected properly/ failed/ or main CPU board dont see the annunciator class A wirin..Trouble point you have to clerify better..
Мне нужен специалист по Simplex 4100es ? Кто-то если сможет настроить, пишите мне. Я заплачу.