Привет. Пытаемся подключиться через E-Sys к m5 f10, пишет "Connection check failed. Gateway/ECUs are not correctly connected or not responding. However Functions using the ODX-Data can be used. [G188]". Из-за чего может быть данная проблема? К остальным машина подключаюсь без проблем(которые не М).
”Error_ecu_subfunction_not_supported__invalid.id_format” any idea?😢 Got the short circuit on 0x00/fl_links Edit:After reading some more, it turns out that if you have an E87 2007 or newer, you must use the frm_70, not frm_87! Amazing tutorial, you just saved me over €1000!!!! Love you!
Владимир, наверняка были машины с ошибками по к-can. может как-нить выйдет видео по поиску и устранению?! понимаю, что это специфическая болячка и в большинстве случаях её причины возникновения разные, но хочется увидеть сам поиск проблемы.
На БМВ я делал сброс остановки двигателя регулировки руля, я не знаю на сколько ошибок он блокируется но хозяин говорил что ногой случаино задевал на кнопку, у БМВ такие прибамбаси очень много, я делал с помощью I COM
Hi Vladimir I have exactly the same problem just on facelift e61. I try to reset but jump out Error ecu subfunction not supported invalid format. Can you help me please? Thanks
Здравствуйте, Владимир, выражаю огромную благодарность! У меня е60, была проблема с левой лампой подсветки номера, перетерлись провода в багажнике, всё перепаял, а лампа всё равно не горела. Ломал себе голову, лез в сам блок LM, думал его менять и тут наткнулся на Ваше видео и всё поправил за 20 минут. Ещё раз большое спасибо, на просторах YT нет более компетентного канала по диагностике и кодировке BMW. Желаю роста аудитории!
Hi Vladimir, I have BMW F46 and I would like to change the turning lights bulbs with LED but I am sur that I'll have error msgs can we solve this issue buy coding ? if yes can you please prepare video about that ? thanks in advance.
Здравствуйте,была проблема с фарой,а именно сгорел блок розжига и адаптива (была влага в фаре) Заменил на новую фару,но светят только глазки,ставлю новую фару на другую сторону и она работает идеально Это же может быть связано с коротким замыканием и цикла из 50 раз? bmw e92
@@BimDoc Thank you for the replay. My rear tail light and break stop working after many warning messages, same as you described. The errors are 804864,80486E. my car is 740i 2016.
Здоровья тебе дружище! Можно ли какой прогой убрать из комплектации салонное зеркало, его у меня поменяли на левое, и выдает ошибки по воротам, затемнению. Также работала функция с датчиками в шинах, но как меняю колеса на летнюю резину и обратно машина их больше не видит.
Hi, i have the problem related to my licence plate led light. so every now and then the frm will block the connection. Is it possible to disable the short circuit check completly?
@Bimmerdoc Fair point. I almost downloaded and tried tool32 but was concerned that I’d mess something up considering your warnings so I checked my scan tool and was happy to see it as an option.
It’s buried deep in the menu. Follow these steps Automatically Search Next Ok System Selection Light Module Special Functions Extensions To identify the light with the fault, go to: Short CircuitStatus of the Output of All Connected Lamps Then go to: Turn Off Short Circuit Inhibit And enter the code of the faulty light
Hi! i think i have this probem to my G30. I am in the process to udate my back lamps to LCI. I have not find the coding solution yet, but meanwhile the brake lights stop working (error short circuit) i think because of the difrent order of pins on lamp contact. It is possible you solved such a problem?
Okay so why did the counter get to 50 on just that bulb, but not for any other bulb ? There must be a fault somewhere and after some time the same issue will come back. Yes or no ?
Of course. There is a physical short circuit in the wiring. That’s why it’s happening. Physical CS has to be fixed first. Other wise it will be blocked again in a short period of time.
About to try this this week. While doing this, you have the vehicle on ignition? Anything you need to do after you have performed the job and before you disconnect?
a video that, due to everything that is explained too much, must be seen more than once now that the subtitles are in more languages, the comprehension dimension is really useful, waiting for extensions of content related to the video, in addition to the subtitles of the video that is in Russian, thank you for your generosity in the breadth of explanations adjacent to the processes, best regards.
You are right. My videos are usually for those who like to think a bit and not searching just for entertainment. Subtitles are available in many languages. Enjoy!
Do other E60 modules have short circuit counters? I have a C519 connection head-unit to GPS aerial foot:short circuit to ground fault code. I also have a right break light error but the right break light works. My satellite radio channels are gone, my nav is inaccurate, and I don't have aux audio. I do have am/fm radio audio, CD changer audio, and chimes. Is there a way to reset such a short circuit? Would a short in the sharkfin cause aux audio and satellite issues after the blown radio fuse #34 has been replaced?
Hi, very good and helpful video! I try to do the same process with an F11, but the modules are different. After a looong attempt with many variables with Tool32, I found that the TMS module (the one of wich angel eyes and turn indicator that not works) don't communicate with Tool32 (error of communication). I think first I will remove the TMS and, after a first check, I will try with repair or a new one module. I guess that is an hardware problem. But I don't find any counter to reset (like your video, the 50 times of error checked). Maybe at F11 is not expected? Thank you for your thougs!
@@BimDoc yes, it was moisture in the left light... today I will check the TMS element and I will see if the water is the reason. Thank you! Keep in touch!
@@BimDoc Thanks! I reset the counter. Left rear brake light (0x0E), everything is reported OKAY, but counter value 60 comes right back. It seems there is actually a short in the wiring(or inside LM). There's continuity between earth and power when measured from bulb socket.
Hello! I am trying to reset circuit shorts on my 2012 e92 328i. My left headlight went out because of water damage, and I replaced all the parts and everything works perfectly, except for the adaptive headlight. I found the short circuits on Toolset32, but for some reason, I do not have a “Tabllen-info” tab showing part ID numbers. It does not show up on my screen when I open FRM_87 and I cannot figure out how to open it. Please let me know if you have any idea on how yo open/access that tab, as i need it to check for the ID’s in order to fix the issue. Thank you.
@@BimDoc I tried this with FRM_70 and same thing happened where everything opens, except Tabllen did not open. I even reinstalled all of the BMW Tools and nothing changed. However, I ran it in simulation mode and Tabllen actually shows up. But when i run it normally with administrator privileges, same thing as before. I am sure that the connection is fine, as I ran INPA and it shows a good connection. I am using the USB to K-DCAN, and I have the switch set to K mode. What version of Toolset32 are you running? Also, what version of Windows?
Excellent thank you! Managed to get it cleared reset counter! Now I would really like to, seat occupany disable passenger on E87, I know it’s MRS module… where is tht in toolset32? Thank you so much!
@@BimDoc lovely! NCSEXPERT is very sensitive 🥲 not working etc, quite difficult to get work, INPA, ISTA+ all working super, but not NCS :( the ECU option shown was CAS, FRM, NFRM. VIN faulty (possibly lack of files) but man I loved your toolset32 for lighting reset! :) link video please? Maybe INSTA+P or other software might do better job than NCS? Also, I have got 2003 E46 M3, I plugged it in, it doesn’t work even in INPA, nor ISTA… does it need to be switch left?) I have K+DCAN. Look forward to hear from you Doc!
@@BimDoc Hey! Right I’ve managed to get NCS expert working! It was communication, setting, NCS are really sensitive than INPA… How do i really know which to use ECU profile like CAS, FRM, NFRM before selecting modules? And I’m trying to understand how to back up ecu, before writing new coding? (Execute Job?) thank you!
Профи, видно сразу!!! Не могли бы Вы подсказать, как отшить блокировку руля на е90 и т.д Постоянно горит желтый руль, не хочется ставить эмуляторы. Ошибка A114 CAS:Line fault, EL, steering lock. Известная проблема БМВ. Заранее благодарен
How can I reset the counter on the REM? I found the status job but I am unable to reset the counter because the reset job is missing on the REM. FEM or FRM is no problem.
Владимер здраствуите , если можно один вопрос , у меня ф 30 328 икс драив , есть желание отключить x drive ,вся информация что нашол ето прога x delite, не ужели ето нельзя сделот e sysom ?
Владимир здравствуйте... вы как всегда на высоте красава нет слов.👍👍👍👍👍. если я правильно понимаю что это может быть слюбым блокам.и не важно ли это свет,или это одна из любой двери?или я неправ???за ранее спасибо..
Нет, такая функция защиты сделана не во всех модулях. От многого спасают самые обычные предохранители. Такая проблема встречается только в модулях отвечающих за освещение.
@@BimDoc i have a BMW 328i 2014 (F30), i use REM_20 and i see the status_shortcircuit job and i run it and i see which argument needs to be reset but there isn’t a reset job for on REM_20 for short circuit counter
Владимир, таки добрый день! Между нами мальчиками, скажи пожалуйста, планируешь ли ты на осень шабаш, хотел бы принять в нем участие и поучится, живу в молдовании но приехал бы с удовольствием!
Привет. Пытаемся подключиться через E-Sys к m5 f10, пишет "Connection check failed. Gateway/ECUs are not correctly connected or not responding. However Functions using the ODX-Data can be used. [G188]". Из-за чего может быть данная проблема? К остальным машина подключаюсь без проблем(которые не М).
Дал ответ в личку
Thank you for this video! Looking forward for the Tool32 tutorial video in English if possible in the future!
Did he ever post?
Did he ever post?
”Error_ecu_subfunction_not_supported__invalid.id_format” any idea?😢
Got the short circuit on 0x00/fl_links
Edit:After reading some more, it turns out that if you have an E87 2007 or newer, you must use the frm_70, not frm_87!
Amazing tutorial, you just saved me over €1000!!!! Love you!
You welcome 🤗
Наконец то правильная машина на видео
Е60 форева ))
Vladimir, please do the video on tool32. It will be good to see that in English. As always, very details and very educational.
We will see how it goes
Владимир, наверняка были машины с ошибками по к-can. может как-нить выйдет видео по поиску и устранению?! понимаю, что это специфическая болячка и в большинстве случаях её причины возникновения разные, но хочется увидеть сам поиск проблемы.
Самая распространённая ошибка это глюк в одном из модулей.
Но тема для видео хорошая!
На БМВ я делал сброс остановки двигателя регулировки руля, я не знаю на сколько ошибок он блокируется но хозяин говорил что ногой случаино задевал на кнопку, у БМВ такие прибамбаси очень много, я делал с помощью I COM
Дякую за урок,інколи заходжу на ваше відео. Дуже приємно. Привіт з Київа,ви вчитель від Бога👼🏻
Hi Vladimir I have exactly the same problem just on facelift e61. I try to reset but jump out Error ecu subfunction not supported invalid format. Can you help me please? Thanks
Shoot me an email or write in Instagram
Думаю надо снять видео ,как сделать сброс коротких замыканий в bmw explorer. It will be very interesting!
Здравствуйте, Владимир, выражаю огромную благодарность!
У меня е60, была проблема с левой лампой подсветки номера, перетерлись провода в багажнике, всё перепаял, а лампа всё равно не горела. Ломал себе голову, лез в сам блок LM, думал его менять и тут наткнулся на Ваше видео и всё поправил за 20 минут.
Ещё раз большое спасибо, на просторах YT нет более компетентного канала по диагностике и кодировке BMW.
Желаю роста аудитории!
Благодарю ☺️
For f10 with FRM how to check short circut status an how to reset ?
On F10 CS is reset after every startup of ecu.
So it’s not needed.
Hi Vladimir, I would like to watch the Tool32 tutorial in English, if it is possible please.
No promises. But maybe
English on tools32 would be awsome Thanks for all your help
Noted!
Yes one in English would be helpful.
Hi Vladimir, I have BMW F46 and I would like to change the turning lights bulbs with LED but I am sur that I'll have error msgs can we solve this issue buy coding ? if yes can you please prepare video about that ? thanks in advance.
You will need esys
My manuals esys for dummies will give you all needed information. Part 1 is enough. Just change right parameters.
Can you please tell me exactly which parameters I have to change ?@@BimDoc
Как с вами связаться ?
Instagram or Facebook
Здравствуйте,была проблема с фарой,а именно сгорел блок розжига и адаптива (была влага в фаре)
Заменил на новую фару,но светят только глазки,ставлю новую фару на другую сторону и она работает идеально
Это же может быть связано с коротким замыканием и цикла из 50 раз? bmw e92
Да может быть из-за этого.
Но для начала надо сделать диагностику и посмотреть в чем дело.
Спасибо
Добрый день, по другому нельзя никак это сделать?
Замена эбу тоже поможет
You said you have a detailed video of tool32 in russian. Where is it?
On the same RUclips channel
Is it possible that the module was also blocked due to a damaged lamp leveling motor???
I haven’t sent blocked motor coursing that.
But any short circuit can cause.
@@BimDoc One lamp performs a test after starting, the other unfortunately does not. There are no errors in the module.
Hi, i have a bmw g12 which EDIABASE ECU file i lunch ?
It depends what ECU you want to work with
@@BimDoc Thank you for the replay. My rear tail light and break stop working after many warning messages, same as you described. The errors are 804864,80486E. my car is 740i 2016.
is there a video on how to connect the car to the tool32?
Same procedure as connecting to E series via icom (use easy connect)
Excellent video, Can we use the same procedure on a Mini R55?
Yes, absolutely
@@BimDoc Thank you
У меня, похоже, такая же ситуация с лампочкой заднего хода :)
Cпасибо за видео!
Вот и пригодится информация
Здоровья тебе дружище! Можно ли какой прогой убрать из комплектации салонное зеркало, его у меня поменяли на левое, и выдает ошибки по воротам, затемнению. Также работала функция с датчиками в шинах, но как меняю колеса на летнюю резину и обратно машина их больше не видит.
Hi Vladimir, looking forward to an English version of Tool32
Hi, i have the problem related to my licence plate led light. so every now and then the frm will block the connection.
Is it possible to disable the short circuit check completly?
Not possible to disable completely.
You can code out hot and cold checks. Maybe it helps.
Спасибо 🙏
I recently did the same reset using the Launch Creader Elite and it was super easy to identify the fault and reset the counter. No need for tool 32.
Of course tool32 is only one tool that can do that, not only tool 😉
@Bimmerdoc
Fair point. I almost downloaded and tried tool32 but was concerned that I’d mess something up considering your warnings so I checked my scan tool and was happy to see it as an option.
Hello, how did you go about it? i have a Launch X431 Pro. Thanks
Same I want to know also
It’s buried deep in the menu. Follow these steps
Automatically Search
Next
Ok
System Selection
Light Module
Special Functions
Extensions
To identify the light with the fault, go to:
Short CircuitStatus of the Output of All Connected Lamps
Then go to: Turn Off Short Circuit Inhibit
And enter the code of the faulty light
How do these software communicate? Did you open FRM and did the soldering? or directly through OBD port?
No opening of FRM is needed for that procedure.
All through OBD
Hi! i think i have this probem to my G30. I am in the process to udate my back lamps to LCI. I have not find the coding solution yet, but meanwhile the brake lights stop working (error short circuit) i think because of the difrent order of pins on lamp contact. It is possible you solved such a problem?
Haven’t seen that on G30
But not telling it’s not possible
Will this work on the bmw F30 2013? I have fem front headlights short circuit, and need a counter reset
Yes it will
Okay so why did the counter get to 50 on just that bulb, but not for any other bulb ? There must be a fault somewhere and after some time the same issue will come back. Yes or no ?
Of course. There is a physical short circuit in the wiring. That’s why it’s happening.
Physical CS has to be fixed first. Other wise it will be blocked again in a short period of time.
Абрикос делает это всё в секунды
Абрикос хорош, но делает только те функции что там прописаны. Далеко не все тоже самое что сам тул32 может
About to try this this week.
While doing this, you have the vehicle on ignition? Anything you need to do after you have performed the job and before you disconnect?
Ignition or engine on, doesn’t matter
No special disconnect procedure
I just discovered your channel and subscribed. Yes please, do a video on Tool32 in English. That would be very helpful for a lot of people.
Thnx )
Thank you so much
You're most welcome
Thanks!
Thnx for supporting my channel. Highly appreciated!!!
Thanks again for a great video.
Please make the video about working with tool 32 in English.
Noted
As always all perfect :)
a video that, due to everything that is explained too much, must be seen more than once now that the subtitles are in more languages, the comprehension dimension is really useful, waiting for extensions of content related to the video, in addition to the subtitles of the video that is in Russian, thank you for your generosity in the breadth of explanations adjacent to the processes, best regards.
You are right. My videos are usually for those who like to think a bit and not searching just for entertainment.
Subtitles are available in many languages.
Enjoy!
Do other E60 modules have short circuit counters? I have a C519 connection head-unit to GPS aerial foot:short circuit to ground fault code. I also have a right break light error but the right break light works. My satellite radio channels are gone, my nav is inaccurate, and I don't have aux audio. I do have am/fm radio audio, CD changer audio, and chimes. Is there a way to reset such a short circuit? Would a short in the sharkfin cause aux audio and satellite issues after the blown radio fuse #34 has been replaced?
Not all consumers have short circuit counter
I’ve never seen GPS antenna being locked by such a counter for example.
@BimmerDoc so, basically just the light module/frm? And thank you for your reply and very informative videos.
Hi, very good and helpful video! I try to do the same process with an F11, but the modules are different. After a looong attempt with many variables with Tool32, I found that the TMS module (the one of wich angel eyes and turn indicator that not works) don't communicate with Tool32 (error of communication). I think first I will remove the TMS and, after a first check, I will try with repair or a new one module. I guess that is an hardware problem. But I don't find any counter to reset (like your video, the 50 times of error checked). Maybe at F11 is not expected? Thank you for your thougs!
Usually TMS go bad due to water… I don’t remember seeing CS in TMS ECUs
But not saying it’s not possible
@@BimDoc yes, it was moisture in the left light... today I will check the TMS element and I will see if the water is the reason. Thank you! Keep in touch!
Thank you very much for video and for great eplanation! :)
You welcome )
One in English will be great!!
What if the counter is not 50, but 60?
I’ve also seen 60 in tool32
Still the same 😉
@@BimDoc Thanks!
I reset the counter. Left rear brake light (0x0E), everything is reported OKAY, but counter value 60 comes right back. It seems there is actually a short in the wiring(or inside LM). There's continuity between earth and power when measured from bulb socket.
If the short circuit is present then of course tool32 will not solve the issue
tool32 can be used to reset egs on f series 8hp gearbox ?
I’m not aware of that possibility
Hello!
I am trying to reset circuit shorts on my 2012 e92 328i. My left headlight went out because of water damage, and I replaced all the parts and everything works perfectly, except for the adaptive headlight. I found the short circuits on Toolset32, but for some reason, I do not have a “Tabllen-info” tab showing part ID numbers. It does not show up on my screen when I open FRM_87 and I cannot figure out how to open it. Please let me know if you have any idea on how yo open/access that tab, as i need it to check for the ID’s in order to fix the issue. Thank you.
Try a wither PRG file
@@BimDoc I tried this with FRM_70 and same thing happened where everything opens, except Tabllen did not open. I even reinstalled all of the BMW Tools and nothing changed. However, I ran it in simulation mode and Tabllen actually shows up. But when i run it normally with administrator privileges, same thing as before. I am sure that the connection is fine, as I ran INPA and it shows a good connection. I am using the USB to K-DCAN, and I have the switch set to K mode. What version of Toolset32 are you running? Also, what version of Windows?
I figured it out. Had to reinstall a 3rd time and it ended up popping up when i ran it. Thanks for all the help! 🙏🏻
Do the low beams and eyebrows have fault counters?
I would tell that every bulb should have a counter
yes , i would like
Can I just reset the entire fem ? Or would I need to reprogram Everton the fem if I reset it?
You cannot always reset everything.
@@BimDoc thank you for replying
Excellent thank you! Managed to get it cleared reset counter!
Now I would really like to, seat occupany disable passenger on E87, I know it’s MRS module… where is tht in toolset32? Thank you so much!
There is nothing to do with tool32
But I have a video about how to fix your issue 😉
@@BimDoc lovely! NCSEXPERT is very sensitive 🥲 not working etc, quite difficult to get work, INPA, ISTA+ all working super, but not NCS :( the ECU option shown was CAS, FRM, NFRM. VIN faulty (possibly lack of files) but man I loved your toolset32 for lighting reset! :) link video please?
Maybe INSTA+P or other software might do better job than NCS?
Also, I have got 2003 E46 M3, I plugged it in, it doesn’t work even in INPA, nor ISTA… does it need to be switch left?) I have K+DCAN. Look forward to hear from you Doc!
See my software installation tutorial to solve those connection issues
@@BimDoc Hey! Right I’ve managed to get NCS expert working! It was communication, setting, NCS are really sensitive than INPA… How do i really know which to use ECU profile like CAS, FRM, NFRM before selecting modules? And I’m trying to understand how to back up ecu, before writing new coding? (Execute Job?) thank you!
Привет. Красава. Я давно тебя про ето спрашивал. Где ты подсказки нашол? Чет я у себя ненашол. Наделал шпаргалок и по ним работал )
Это есть в любом тул32. Надо только знать где искать 🔍)))
As usual, very informative and rich content, thanks 🙏🏻
You welcome
Взял на заметку, спасибо!
Профи, видно сразу!!! Не могли бы Вы подсказать, как отшить блокировку руля на е90 и т.д Постоянно горит желтый руль, не хочется ставить эмуляторы. Ошибка A114 CAS:Line fault, EL, steering lock. Известная проблема БМВ. Заранее благодарен
Вы так просто ее не отошьете.
Это прописано во влеш модуля CAS
@@BimDoc Понял, жаль. Проблема многих БМВ
It will work with short circuit on DMTL system on E90 ?
It will if ECU supports that function. I haven’t tested that.
@@BimDoc thanks
For e90?😢
The principle is the same
@@BimDoc ,I have only value 01,can I change?
How can I reset the counter on the REM? I found the status job but I am unable to reset the counter because the reset job is missing on the REM. FEM or FRM is no problem.
A bit more tool32 knowledge is needed
But still doable. Believe me 😉
@@BimDoc im sure just not the way you did it in the video
It is the same principle, just another job is needed
@@BimDoc which one?
@@BimDoc doesnt work on tool32 for F series but with ISTA+ its pretty easy
Карманным лаунчем не получится сбросить ошибку?
Не пробовал
Здравствуйте Владимир , можете удалить лямбди из эбу Siemens. MSS65. BMW E60 on line. и сколько стоит ?
Делается и по удаленке
@@BimDoc Сколько стоит и чем можно сделать ?
Как всегда, красиво!!! А самое главное понятно!!! Спасибо
А пожалуйста ☺️
От души! =)
Как всегда на высшем уровне.
Владимер здраствуите , если можно один вопрос , у меня ф 30 328 икс драив , есть желание отключить x drive ,вся информация что нашол ето прога x delite, не ужели ето нельзя сделот e sysom ?
Нет, через Esys не делается
@@BimDoc Получается кроме как x dellite , другого адекватного решения нету?
@@BimDoc А как так!? Каким образом xdelete тогда работает?
Hi;tool32 can be connect to F series ?
Yes it can. No problems with that
@@BimDoc
Thank you
Привет ,почему не на русском языке ?
Поддержка русского языка теперь в виде субтитров.
Владимир здравствуйте... вы как всегда на высоте красава нет слов.👍👍👍👍👍. если я правильно понимаю что это может быть слюбым блокам.и не важно ли это свет,или это одна из любой двери?или я неправ???за ранее спасибо..
Нет, такая функция защиты сделана не во всех модулях. От многого спасают самые обычные предохранители.
Такая проблема встречается только в модулях отвечающих за освещение.
Понел спасибо
@@BimDoc
Hi, can you make a tutorial on how to reset short circuit counter on F series ?
The same way. But for example on F10 counter reset is performed automatically during every car start. So no need.
@@BimDoc i have a BMW 328i 2014 (F30), i use REM_20 and i see the status_shortcircuit job and i run it and i see which argument needs to be reset but there isn’t a reset job for on REM_20 for short circuit counter
@@BimDoc I would really appreciate your help
On F30 doable via tool32
If you will not figure it out how to, then contact me. I’ll help you.
@@BimDoc how can i contact you, i will make sure to pay you if you can help me out !
А таки шалом! Вы как всегда на высоте, а таки даете приятные советы и уроки, не останавливайтесь, вы шикарно это делаете, шобы Вы были здоровы!
Благодарю
Владимир, таки добрый день! Между нами мальчиками, скажи пожалуйста, планируешь ли ты на осень шабаш, хотел бы принять в нем участие и поучится, живу в молдовании но приехал бы с удовольствием!
Курсы по бмв запланированы на июль
Следующие на русском не раньше 2023 года
Владимир, я благодарен вам, что вы начали выпускать видео на английском
Может на русском? Для всех твоих подписчиков?
На чувашском!
Завязывай
Hey bro can you reset my fault counter on my left DRL , i will pay you, this looks complicated
Contact me via Instagram or Facebook
Don’t forget to describe the problem and bmw chassis
@@BimDocCan i message you on instagram