I don't know why, but it was very soothing to my eyes to watch him work so skillfully. The Cannon also looks like one of those things which you will immediately have the urge of owning.
I just love a brass item. The Cannon is just icing on the cake. Thank you for showing us the process using modern tooling one can purchase and use. Peace fella.
Делдахь Мовсар ма корт бу хьо ма говзалла йол хьоьгахь Дала дукх вах войл хьо :) далеко пойдешь ) Дала аьтто бойл с удовольствием смотрю твои видео ждем еще ))
Всегда есть варианты и один из - вставить маленькую свечу (вверху), зажечь и понимай, как можешь - то ли символ по погибшим в войнах, то ли "мы - мирные люди, но, наш бронепоезд стоит на запасном пути". Не ожидал, если честно, такого творчества. Трубы гнул, на бензопилах ездил, а тут - на тебе.
Haha, tellement vrai ! Enfin un compatriote dans les commentaires ! Pour ma part, j'ai un petit tour à métaux (un Holzmann ED300ECO) et j'ai réalisé une réplique en laiton du Canon Obusier de 12 livres, époque Napoléon 3. Mais je ne pense pas le rendre fonctionnel. Il faut encore que je fasse l'affût de Marine en bois (celui de campagne est trop compliqué), et je n'ai pas percé de trou pour la mèche.
I strongly recommend you use gloves and be gentle with the brushing when you use the bluing liquid. VERY dangerous chemicals. Not unique to that brand, they are all the same. Love the cannon!
And the next cannon, for there will be a next, would perhaps be a scaled down version of the legendary flak 88mm so you can hit bullseye ;-) As for ideas - anything involving firewood, wood chippers and woods/trees are always fun. And crazy ideas - I am fond of practical jokes and think the "jack in a box" is severly underrated these days.
For the drill that was stuck, Brass alloys can be pretty catchy when drilling with already existing holes. To avoid that, i just "unsharp" the drill bit by running its cutting blades with a sharpening stone. Works like a charm, just need to sharpen the drill bit again after.
I discovered that the hard way myself, though I'm reluctant to dull and re-sharpen my larger bits. So far, I've been able to straight drill brass without pre-piloting the holes, which eliminated the chatter, jamming and the awful noise!
Also, masonry drill bits are a good option for drilling softer metals. Only caveat is that the carbide bit (usually) has a larger diameter than the shank that _can_ cause deep holes to curve slightly. However, this can be solved by grinding the carbide insert down to the diameter of the spiral. I spent a Weekend years ago grinding a cheap drill bit set down to all the nominal dimensions. I did have to grind down the diameter of the spiram of a couple drills as they were slightly 'overzied'. Recently I got myself a much better diamond grounding kit and completely altered the geometry of the drilbits to be highly self centering. Because even after grinding the cutting bit down they could ween off ever so slightly... As a bonus they also work on hardened steel! But for regular cold rolled steel normal hss is still preferable due to the much higher cutting times..
I don't know why, but it was very soothing to my eyes to watch him work so skillfully. The Cannon also looks like one of those things which you will immediately have the urge of owning.
its a very goooooooooooooooooooood and nice work ,, continued
It’s good to see that there are still some old school machinists still around! Great video 👍🏼 👍🏼
W₹#4
すばらしい!私も作りたいけどあんなすごい機器もってない。
You've saved me so much money by convincing me I'm not up to the task of doing this kind of work. Much cheaper to watch you do it so dang well.
Its beautiful
旋盤工程の手際がイイね。完成近づくにつれてワクワクしてくる
Thanks From Bangladesh
In olden days they used to make real ones without MACHINES just imagine the effort they had to put in
i agree
Mind blowing sir...
Love from Bangladesh 🇧🇩
Don't forget about Gandalf's cannon!
Well done you managed to jump scare me and my nephew we thought the cannon test fire was a dud XD
Quiero uno!!!!!. Espectacular trabajo, como todo lo que hace. Saludos desde la República Dominicana.
keren sekali meriam nya
Looks like you're all set to forge heavy artillery. Love your work.
Imagine making like 40 of those , mounting them inside your car door and driveby broadsiding someone elses car in the middle of the road
I just love a brass item. The Cannon is just icing on the cake. Thank you for showing us the process using modern tooling one can purchase and use. Peace fella.
見出しが日本語だったからてっきり、「えっ、これ日本でやったらヤバいヤツだ。」と思っちゃった😂
同じくw
実質ほぼ単なる金属パイプでも、火薬先詰めして弾を入れて発火させれば殺傷力ありとか言われるもんな
Nice Cannon.
I'm amazed as to what people can do with metal and tools!
So beautiful sir good job thank you
やっぱ黄銅の被削性は高いですね
切削時の映像がなんとも快適
فعلا عمل رائع تستحق اللايك بجداره
日本だと銃刀法で動画のように使えませんが、香炉としてはいいな
I imagine that will be taken now with the unfortunate assassination of a decent leader.
It's great to witness the presence of traditional machinists who still adhere to old-school methods. The video was impressive! 👍🏼👍🏼
ma sha Allah baarakaLlah vasha,layk odnazna4no.
Nice shot
Делдахь Мовсар ма корт бу хьо ма говзалла йол хьоьгахь Дала дукх вах войл хьо :) далеко пойдешь ) Дала аьтто бойл с удовольствием смотрю твои видео ждем еще ))
Fascinating job.
工業高校だったので 実習の時間を懐かしく思い出す
3 Frippy 学年上がる事に違いますが、1年生の間は週一で実習がありますよ〜だいたい3時間くらい使って、機械科は旋盤とフライス、溶接に鍛造をやります
実習じゃなければ、工作や工業技術基礎、情報処理など専門的な知識を広く浅く勉強します
深く勉強したい場合は、資格勉強の際に教えて貰えます
It's awesome. Oh my god
hard work with effort, always gives good results, this is the art of a blast, !BOOM¡.
Really cool cannon
Funny ending. I thought his ass was going to be blown away, lol.
Even I thought the same
Jjjj
Kay bat he
Videos dekh ke sach much maja aa gay
Ассаламу 1алайкум брат. Хьо говза ву! Тенгахь lаьш ву хьо?... ала мегаш делахь... Аллахlа аьтто бойла хьа!
Ва1алайкум салам. Ризван со Бельгехь 1аш ву
@@meanwhileinthegarage 👍Хаза хета, ишта талант йолаш, вежарий хилча. Аллахlа гlо дойла хьуна, дика чунтlехь!
Дела реза хийла сан ваш
Love it...😃
Dagdar du dokx hum 😂 krasavchik Dal eto boyla ha ☝🏼
Лом-1ела,
Дела реза хийла сан ваш
Masso busalban hil Dela reza sa vash
superb... I watch your video from sri lanka congratulation...
And boom! Looks amazing
This chanel deserve more than100000 subscribers
Fantastico...complimenti!
Amezing sir
It always fascinated me how the metal get polished when rubbing with rough material.
+1
Qrio
good boss what a work
Всегда есть варианты и один из - вставить маленькую свечу (вверху), зажечь и понимай, как можешь - то ли символ по погибшим в войнах, то ли "мы - мирные люди, но, наш бронепоезд стоит на запасном пути".
Не ожидал, если честно, такого творчества. Трубы гнул, на бензопилах ездил, а тут - на тебе.
Спасибо Валера. Я сам не ожидал :-))
Да действительно, хорошая работа.
Senjata mini mematikan...karya spektakuler
Masha Allah, Dal eto boyl !
Little big weapon, good job.
すごく上手なんですね!
見ていてワクワクします❗️
これからずっと見させていただきます!
チャンネル登録しました!
これからも頑張ってください❗️👍😆
スゲェ~玉を打てるのか!
カッコいい!
Love From Bangladesh 🇧🇩🇧🇩🇧🇩🥰🥰🇧🇩🇧🇩🇧🇩❤️❤️🇧🇩🇧🇩🇧🇩🇧🇩
Woww amazing💕😍
Complimenti, nel suo piccolo spara potenti cannonate
What a legend mate , great vid especially liked the bit at 2.02 💪🏽 brass looks so good with a little polishing , great little project
ive been machining for 13 years and making a cannon never crossed my mind lol hats off to you sir
Excelente trabajo, felicitaciones!
So amazinggggggggggggggggg
めっちゃカッコいい😍
I like this 👍👍
GOOD JOB !!!
Si tu as des probleme avec les voisins tu sais quoi faire ;)
If you have problems with the neighbors you know what to do;)
Haha, tellement vrai !
Enfin un compatriote dans les commentaires !
Pour ma part, j'ai un petit tour à métaux (un Holzmann ED300ECO) et j'ai réalisé une réplique en laiton du Canon Obusier de 12 livres, époque Napoléon 3.
Mais je ne pense pas le rendre fonctionnel. Il faut encore que je fasse l'affût de Marine en bois (celui de campagne est trop compliqué), et je n'ai pas percé de trou pour la mèche.
Как всегда ...ВЕЛИКОЛЕПНО!
Just gotta love things that go boom!
tolle Arbeit!!!
Wow, that's beautiful.
Good idea man
想像以上にキャノンだった笑
Excellent use of the clamp.
Maybe one day I’ll have the skill and tools required
What a wonderful
с такого поджига можно лося завалить))
Can I buy one from you
Yes I have
Can u send me your website or direct me on how I can buy one from u , plse
Just go make one
@@kamranahmed8086 I want it what is price
Beautiful beautiful job
I strongly recommend you use gloves and be gentle with the brushing when you use the bluing liquid. VERY dangerous chemicals. Not unique to that brand, they are all the same. Love the cannon!
Thank you very much for not just passing by, but for worrying and giving good advice.
I will be careful
Superb
Круто сделанно 👍
Superb ...
Poxa.... Eu adoraria ter esse canhão, iria ficar lindo na minha mesa.
Good job
Wow. That "subscribe" and "like" were about as subtle as a ball bat in the nuts. LOL
Дал таьхье беркате йойл.
Хаз видеош йох ахь.
Амин, вай массер.
Lathe metal work with brass was my favourite at school, made model cannons too, not working though. I just found a rediscovery, thanks.
I wasn't as creative, I just made brass one hitters in high school shop class :-(
Im a big fan
So, this is what the ammo shortage has made me resort to! This was a fun watch. Thanks!
Keren pak dhe😍
かっけぇ! 欲しい!
しかしこう考えると、如何に工作機械や金型が他国に漏れるのが怖いかわかる…
I like the starting the milling with the putting on the safety glasses. That was awesome.
And the next cannon, for there will be a next, would perhaps be a scaled down version of the legendary flak 88mm so you can hit bullseye ;-)
As for ideas - anything involving firewood, wood chippers and woods/trees are always fun.
And crazy ideas - I am fond of practical jokes and think the "jack in a box" is severly underrated these days.
Золотые руки 👍👍‼️‼️
For the drill that was stuck, Brass alloys can be pretty catchy when drilling with already existing holes. To avoid that, i just "unsharp" the drill bit by running its cutting blades with a sharpening stone. Works like a charm, just need to sharpen the drill bit again after.
I discovered that the hard way myself, though I'm reluctant to dull and re-sharpen my larger bits.
So far, I've been able to straight drill brass without pre-piloting the holes, which eliminated the chatter, jamming and the awful noise!
Also, masonry drill bits are a good option for drilling softer metals. Only caveat is that the carbide bit (usually) has a larger diameter than the shank that _can_ cause deep holes to curve slightly. However, this can be solved by grinding the carbide insert down to the diameter of the spiral.
I spent a Weekend years ago grinding a cheap drill bit set down to all the nominal dimensions. I did have to grind down the diameter of the spiram of a couple drills as they were slightly 'overzied'.
Recently I got myself a much better diamond grounding kit and completely altered the geometry of the drilbits to be highly self centering. Because even after grinding the cutting bit down they could ween off ever so slightly...
As a bonus they also work on hardened steel!
But for regular cold rolled steel normal hss is still preferable due to the much higher cutting times..
Good effort job
Awesome job. Nice catch on the wheel proportions, I thought they looked a little beefy as well 👌
Nice job
Достойный экземпляр для подарка, мастеру респект)
в россии бы расскулились- огнястрельно оружье, запретить, отобрать, посадить итд))
@@vaaanmo Так оно и есть! На одного ютубера заявление в полицию накатали (сосед с.ка)
@@vaaanmo не только в России.
В Беларуси тоже самое.
Сразу срок впаяют за незаконное изготовление огнестрела.
It didnt take long for me to hate you. Ill never have that level of skill. Nice work.
Watching someone turn metal is oddly satisfying to me.
Very cool....
海外の人の家にはみんなこのような機械があるのか!?
very good your videos professional work a hug here from Brazil
This'll go great with my future mini Pirate ship.