How To Fix a Locked Seatbelt fully retracted On A BMW 2007 e90 e92 328i 335i 335 M3 Makes DIY
HTML-код
- Опубликовано: 22 авг 2024
- This video will show you how to unlock a locked seatbelt mechanism on a BMW or possibly other models and makes. Seatbelt wont pullout and locked in the retracted position.
Thank you! This video just saved me $901.89. That’s what the Hyundai dealership was going to charge me just to replace the seatbelt. My issue was a little different than what your video was about, because when I opened the mechanism I found that there was a string wrapped around things, which caused it to stay locked in place.
Almost went into debt over a piece of string.
same to my honda civic 2006, a hair type string messed a spring!
This video is very descriptive and educational. It get straight to the problem solving.
This VISUALLY helped me understand and get the belt out of a 1997 dodge ram van seat belt.(ball bearing style)
Removed the passenger seat to mount a security device and BAM, the re-tractor ate the whole belt and it was tight, no slack, not budging and I knew nothing about seat belts.
That bearing is sensitive and wants to be level when pulling on the belt. Half the other vids I watched showed guys yanking the belt like a hot dog which makes no sense.
1. Make sure the seatbelt box is level like it is originally mounted.Tip a few degrees here and there to find that sweet spot.
2.Real in slow till you hear a click.
3.Pull the belt out gently and slowly. There is another mechanism in the device that locks it up if you yank!
Finally a good explanation thanks!! Fixed my '99 CRV
This is the only good explanation I’ve found. Thank you!
Happy to hear it helped.
Thanks Friend, my car GM Chevy and I just removed for a general service, belt rolled in and stuck. Technically your video similar "iron ball" gyro meter technology is used and problem resolved. Cheers ;)
Life saver!! Just did this on a $25 eBay replacement belt for my 335i.
Worked for a B6 Audi S4 rear seatbelt. Many thanks.
Worked on mini Roadster, big thank you 👍
Thank you! Fixed my SxS seatbelt.
Thank you man, you just gave me the exact answer
Glad it helped you!
Unfortunately, although this covers the concepts very well and the video says e90, E92 (and e91), do not assume that this video applies to newer vehicles or the E93. The newer seatbelt mechanisms are considerably more complicated than this and the E93 convertible has a totally different mechanism. Great help overall but the newer retracters are different. Just a little heads-up.
Thank you so much I'm gonna give this a try on my Malibu
this helped with my 2014 buick verano, thanks!
Thank you. This video help me a lot. 👍👍👍
after watching many many, your video did the trick! thanks SO SO VERY MUCH.
You should show us if it worked properly after you installed it!
Thanks blood it help me with honda civic 👍👍
worked on my f90 m5
works on my honda civic 2006, a hair type string is in there. after remove it, the retractor works. thank you!
Unless I'm missing something, the whole concept of our safety (for this model of seatbelt) rests on the little white plastic tab that engages the teeth on the blue wheel.
That's all seatbelts that I know of lol
OUR LIVES ARE HOLDING ON PIECES OF PLASTIC 😄.... NO NO...Actually you ARE missing something,.as far as i understood that mecanism or white plastic as you described it is only responsible for locking the seat belt when the car is inclined, to hold you dearly and not let you fall from your seat, but when it's about safety, if there is a small accident for example or you suddenly stop , there is a second mecanism activated that locks the seat belt, it's not in plastic in that case don't worry, it's real steel and it's just below the blue plastic, in extreme cases if ALLAH forbid there is a serious accident that requires the popping of airbags, then the locking is terminal and irreversible, even if you try to repair the seatbelt after you won't be able to restore same way it was and it won't be as secure enough, that mecanism is bit more complicated and it's located on the other side that was not opened in this video, and it starts with a little explosion
It worked for my bmw 1 series.
Thank you so much sir!!
This is the kind of setup that the Honda 06 pilot have this help me out
Thanks it really helps...Godbless
thank you for great information
I have replaced my black belts with some red ones (genuine) and they seem to pull fine at a certain angle. When installed in the car 99% of the time i cannot pull the belt keeps getting stuck... even when it does work it keeps tightening up while driving.
Would this procedure work on a 2011 Mercedes w204?
EDIT: I have managed to fix the issue. The belts are very sensitive to the position they are held in. I straightened the location added a new bolt and the issue is now fixed and belts work perfectly.
I had the same problem. I could pull the belt only at a certain angle, what i did was that I bent the metal where the seatbelt it is attached in such angle that the belt worked. That fixed the problem.
how about when it's the side with the spring that's locked instead of the ball bearing?
CIREM3- If you remove the ball bearing and reinstall the belt, will the belt still lock up when you pull it, as in a wreck? It's been my experience that manufacturers seldom include non-functioning or useless parts in anything.
No, do not remove the bearing. That is what causes the lock to engage.
I have successfully unlocked one of my belts using your video and will do the other one tomorrow. It's so easy when you get accurate information to go on. Thanks a bunch!
So helpful
Wonder if E36 is made the same way? Guess I'll just have to find out... Thanks for the video!
Jacques Sucic it should be very similar. Good luck. This worked out to be a temporary fix until it was replaced just to be safe.
I ended up having to (re)wind the spring on the other side LMAO at that point someone else would have thrown it away then opened the proper side an sprayed some lube in and got it working but put a zip tie at the length I needed so it wouldn't retract to far just in case! Thanks man!
Hello thanks for the video, I have a 2015 GMC Sierra and both passenger and driver's seatbelts are locked, how do I know if the seatbelts bottom anchors need to be replaced? Hope this makes sense.
Not sure what you're referring to as anchors.
Cant pulled the webbing due to Is not in vehicle position...Is locking due to Ball Is out of position..
Why cause the ball to move out of center
Did you have to take off the seats and the parcel shelf in the back to get this out ? Was there anything else I need to remove to get to this ?
It's been a while, but I remember removing the seat bottom and slightly removing the seat back so that I could get the seat belt retractor out
@@CIREM3 thank you
Ooooseat belt in jeep grand cherokee
This is awesome, do you know if the E93 seat is also motion activated (ball bearing like this?)
It should be
@@CIREM3 thanks very much!!
Thanks for not being clear I opened wrong side spring came out.
The other side is much different to take off and more difficult.
I would watch the rest but I seen the Cowboy logo 🤮
Jk, 😂thanks for the vid😊
A Cowboy fan and a Marlboro Red smoker !!!! Must know what he is talking about!!!!!
It's going to lock on you again, i would just replace it if you are going to keep the car
hey man you cant be using that cowboys symbol as a work bench. Thats very disrespectful. lol
mike jackass lol
And go match on whoever is videoing...lol
L
You obviously don’t know what you’re doing. This video should be taken down - really bad job, dude.
what is your solution? this clip helped my issue.
okay girl you go fix it and come back and see if you could do it bye
Lame vid.
Key stuff is not on cam
U can calculate and fix it.
your life is lame