So grateful for your video. I have been searching for ways to improve my lab environment to actually be able to do CCNP labs. Thank you so much for the great how-to, it worked flawlessly.
I spent 1 full day to look for a perfect walkthrough video to help me install the IOU, as I've been getting too much errors during installation. Finally I found this. Thank you so much 🥺🥳
Thank you very much my friend. Your tutorial is very beneficial and at last I am able to install the IOU in GNS VM. I have to figure out a few other thing as I don't have secure copy install in windows. I have to copy manually the license file from gns3 folder to /opt/images...Hopefully, I used to Linux and it was less of a problem to move around in the VM folder.
Tengo la versión VM 2.2.15 , estaba probando con tu video anterior y deje el iourc en la carpeta image y veo este video confirmando que estaba bien jejejejej gracias Christian, tus vídeos como siempre de gran ayuda, excelente calidad. ¿Por que en varios videos de switches usas vm maestro en vez de gns3 ?. Saludos
Thank you, vIOS-L2 is the development of Cisco VIRL PE and has gigabit interfaces and advanced features, IOU is a older version with ethernet interfaces that still works for practice. For VIRL PE you need to pay and IOU is free
thanks for sharing. i have noticed that when installing IOU L3 on gns3 there is no default SVI vlan 1 on it, what seem to be missing on configuration on GNS3-VM?
Hi Sir, hope you can answer my question. im new to gns3 and may i ask what is the difference Of IOU2 , IOU3 and IOSvl2, what should i use? I want to simulate a multilayer switch on my gns3
IOU L2 is a switch that can be used as L2 switch or L3 switch and has ethernet interfaces. IOU L3 is a layer 3 switch with ethernet interfaces. Finally IOSvL2 is a switch that can be used as L2 switch or L3 switch and has gigabit ethernet interfaces
Really helpfull thanks. But i have an issue, at the "Already copy to the file iourc.txt" i don't have it. I just have the licence and after the "You can disable the phone home ..."... How can i do to generate the iourc.txt ?
Is it possible that the switch module is missing from your device? I try to install arp inspection on cisco L2 switch but i constantly get this error message: ip arp inspection vlan 1 ( % invalid input detected at '^' marker. )
The VMware Tools power-on script did not run successfully in this virtual machine. If you have configured a custom power-on script in this virtual machine, make sure that it contains no errors. You can also submit a support request to report this issue. Should i be worried about this message?
Alguien que me ayude por favor, cuando arrastro los dispositivos, me quedan en este caso en DESKTOP-I7VQB9Q y no en GNS3 VM, por eso cuando corro (start) los dispositivos me sale que hostname incorrecto (Hostname DESKTOP-I7VQB9Q not found in), alguien sabe porque sera? Muchas Gracias. Ya que cuando los arrastran me quedan automáticamente en la maquina local, no en la maquina virtual de GNS3, cuando arrastro un HUB si me dice en que servidor quiere ejecutarlo, pero debe ser porque es un dispositivo pasivo, pero los Routers en general y Switch me lo envía de una al local.
So grateful for your video. I have been searching for ways to improve my lab environment to actually be able to do CCNP labs. Thank you so much for the great how-to, it worked flawlessly.
Glad it was helpful! Thank you for all your support my friend!
this is the best tutorial i found . adding configuring IOS L3 to gns3 .
Glad it helped, I appreciate it
I spent 1 full day to look for a perfect walkthrough video to help me install the IOU, as I've been getting too much errors during installation. Finally I found this. Thank you so much 🥺🥳
Glad I could help! Thank you for all your support
Thank you so much, I like to follow your tutorials . I feel very much comfortable with your explanation and experience.
Happy to hear that! Thank you
Thank you very much my friend. Your tutorial is very beneficial and at last I am able to install the IOU in GNS VM. I have to figure out a few other thing as I don't have secure copy install in windows. I have to copy manually the license file from gns3 folder to /opt/images...Hopefully, I used to Linux and it was less of a problem to move around in the VM folder.
You are welcome, thank you for your comments
what a guy!, very helpful my man you made my Sunday. Cant wait to have fun with it now!!!
Glad I could help! Thank you for all your support
Gracias por todo el gran contenido que compartes. Excelente canal. Saludos!
Gracias por todo tu apoyo, lo aprecio
Heavily helpful ! You're a king !
Glad to hear that! I appreciate your comment
Nuevamente gracias bro, instalado y corriendo.
gracias por seguir estos videos
Tengo la versión VM 2.2.15 , estaba probando con tu video anterior y deje el iourc en la carpeta image y veo este video confirmando que estaba bien jejejejej gracias Christian, tus vídeos como siempre de gran ayuda, excelente calidad. ¿Por que en varios videos de switches usas vm maestro en vez de gns3 ?. Saludos
es posible hacerlo en GNS3 porque la IOS L2 de GNS3 es la misma que IOSvL2 de VIRL PE, la diferencia que en VIRL PE usa Gigabit y en GNS3 Ethernet
thank you very much for such a great video
You're very welcome!
Thank you so much
De los mejores videos que he visto, Gracias por compartir, Tienes un video para el ASA ?
Este es el video, gracias por todo ruclips.net/video/ueA_zFyyS48/видео.html
Thanks my friend! Great help for me.
Glad to help! Thank you for all your support!!!!
lots of thanks for sure
Most welcome!
Gracias brother.
Gracias a ti
thanks sir, for this work
Most welcome. I appreciate it
thank u so much
You are most welcome
Thanks a lot
Thank you my friend!!!
Thanks a lottt you saved me!!! Can you please tell me the difference between vIOS and IOU ?
Thank you, vIOS-L2 is the development of Cisco VIRL PE and has gigabit interfaces and advanced features, IOU is a older version with ethernet interfaces that still works for practice. For VIRL PE you need to pay and IOU is free
thanks for sharing. i have noticed that when installing IOU L3 on gns3 there is no default SVI vlan 1 on it, what seem to be missing on configuration on GNS3-VM?
there is a VLAN 1 by default, thank you
Hi Sir, hope you can answer my question. im new to gns3 and may i ask what is the difference Of IOU2 , IOU3 and IOSvl2, what should i use? I want to simulate a multilayer switch on my gns3
IOU L2 is a switch that can be used as L2 switch or L3 switch and has ethernet interfaces. IOU L3 is a layer 3 switch with ethernet interfaces. Finally IOSvL2 is a switch that can be used as L2 switch or L3 switch and has gigabit ethernet interfaces
Really helpfull thanks. But i have an issue, at the "Already copy to the file iourc.txt" i don't have it. I just have the licence and after the "You can disable the phone home ..."... How can i do to generate the iourc.txt ?
OH, please if you can use this new image for Switches ruclips.net/video/dOs4o57pAmk/видео.html
Is it possible that the switch module is missing from your device? I try to install arp inspection on cisco L2 switch but i constantly get this error message:
ip arp inspection vlan 1 ( % invalid input detected at '^' marker. )
You can try in IOSLv2 image ruclips.net/video/dOs4o57pAmk/видео.html
I am not sure why when i try "sudo apt updaes" it failed on me all of the files ? any tip or idea why giving me that ?
please be sure you are connected to Internet, or install this image that is more powerful and easy ruclips.net/video/dOs4o57pAmk/видео.html
do you also have fortigate and ASA firewall images ?
Only for ASA ruclips.net/video/ueA_zFyyS48/видео.html
The VMware Tools power-on script did not run successfully in this virtual machine. If you have configured a custom power-on script in this virtual machine, make sure that it contains no errors. You can also submit a support request to report this issue. Should i be worried about this message?
please use social networks shown in 00:03 to send me screenshots and details
How can I make sure that I am not downloading viruses or trojans from your site? Do you have the MD5 values of the files published by Cisco?
please trust in me
@@romeroc24 Oh so you don't have MD5 values?
@@super-super- really not
I can't update (I dont get a connection to the internet) my gns3 machine. Do you have a solution for this ?
ruclips.net/video/X18WAOSp4YY/видео.html
ruclips.net/video/9Tx24R-o_4A/видео.html
Try those videos
Alguien que me ayude por favor, cuando arrastro los dispositivos, me quedan en este caso en DESKTOP-I7VQB9Q y no en GNS3 VM, por eso cuando corro (start) los dispositivos me sale que hostname incorrecto (Hostname DESKTOP-I7VQB9Q not found in), alguien sabe porque sera? Muchas Gracias. Ya que cuando los arrastran me quedan automáticamente en la maquina local, no en la maquina virtual de GNS3, cuando arrastro un HUB si me dice en que servidor quiere ejecutarlo, pero debe ser porque es un dispositivo pasivo, pero los Routers en general y Switch me lo envía de una al local.
Puedes intentar reinstalando GNS3 y GNS3 VM
I try this , but it can't start the L2 switch , licenses key have not use
I have use MacBook Pro 13
error code : This node must be started before a console can be opened
right click on the device, start device, wait a minute the open console with double click
is it possible to run this on ubtubtu without VMware
there is a version of GNS3 for Linux and GNS3 VM should be installed on a virtual machine on Linux
How can I do this on a MAC iOS?
You can use VMware Fusion to hold the GNS3 VM after that the steps are the same
What is that?
Switches on Layer 3, on GNS3
Thank you so much