Many thanks Md Anwar Hossan. After a long search to get GNS3 working, this video have helped me in getting GNS3 up and running with both L2 and L3 IOU working perfectly.
অসংখ্য ধন্যবাদ। অনেক দিন পর ফেলাম এমন একটা টিউটোরিয়াল । ডাউনলোড করা সিসকো আইওস ফাইল দেখি GNS3A extension . bin ফাইল এর জন্য আপলোড করতে পারছি না। কি করবো এখন ?
Step 01: upload Cisco l2 and l3 switch image to gns3 client (Click edit> IOS on UNIX> IOU> Click New> Select "Run the IOU device on the GNS3" then click next> Name it and select and click browse and select the image file. Step 02: Open winscp Input hostname gns3 vm IP Port: 22 Username: gns3 Password: gns3 Then click login After login you need to upload CiscoIOUKeygn3f.py file to /opt/gns3/images/IOU Step 03: Go to gns3 vm and select Shell Run following command > cd /opt/gns3/images/IOU/ > sudo python3 CiscoIOUKeygen3f.py After run python script go back to winscp And click refresh in gns3 vm end Then you will see iourc Drug this iourc file and drop to your local drive. After all again go back to gns3 client Click edit > Preference> IOS on UNIX > Click browse and open the iourc.txt file Follow this steps carefully also follow the video 1st to last.
Step 01: upload Cisco l2 and l3 switch image to gns3 client (Click edit> IOS on UNIX> IOU> Click New> Select "Run the IOU device on the GNS3" then click next> Name it and select and click browse and select the image file. Step 02: Open winscp Input hostname gns3 vm IP Port: 22 Username: gns3 Password: gns3 Then click login After login you need to upload CiscoIOUKeygn3f.py file to /opt/gns3/images/IOU Step 03: Go to gns3 vm and select Shell Run following command > cd /opt/gns3/images/IOU/ > sudo python3 CiscoIOUKeygen3f.py After run python script go back to winscp And click refresh in gns3 vm end Then you will see iourc Drug this iourc file and drop to your local drive. After all again go back to gns3 client Click edit > Preference> IOS on UNIX > Click browse and open the iourc.txt file Follow this steps carefully also follow the video 1st to last.
Thanks for your training videos. my GNS3 show below. " Could not start IOU: [Errno 2] No such file or directory: '/opt/gns3/images/IOU/i86bi-linux-l3-adventerprisek9-15.4.1T.bin': 32-bit binary support is probably not installed" What's that meaning ? Could you please help
Many thanks Md Anwar Hossan. After a long search to get GNS3 working, this video have helped me in getting GNS3 up and running with both L2 and L3 IOU working perfectly.
you are a life saver been on youtube for the past 13 hours trying to figure this out. thank you.
Bro..you saved my course... i have searched whole internet and then yours only worked. thank you!!
Thanks for this quick and exact guidance
i didn’t see any kind of video like this, hats off to you brother, its very nice
Thank you so much 😀
WOW...Thanks a lot, bro. At last, fixed my problem with your amazing video.
Superb bro...
Your video saved me sir. Thank you very much.
Thank you very much sir. Your video was really helpful.
vc é o cara man, obrigado!!
Awesome you save me a lot of time. Thanks a lot!!
thank you bro ....its work i am very happy
All I can say is thank you!!!
Thank you! You saved me
very nice your tutorial! thanks
This is the solution to my problems; thanks a lot.
damn bro it works
You are amazing
thank you broo..it was very useful..
thank you man great video
Awesome 👍
Thank you! Cheers!
superb bro
thanks
que pro, perfect and thank you
wow well done bro
thank so much.....
Great video!
Thanks
My pleasure
😭😭😭thank you sir......
অসংখ্য ধন্যবাদ। অনেক দিন পর ফেলাম এমন একটা টিউটোরিয়াল ।
ডাউনলোড করা সিসকো আইওস ফাইল দেখি GNS3A extension . bin ফাইল এর জন্য আপলোড করতে পারছি না। কি করবো এখন ?
Yes this is the correct extension
Step 01: upload Cisco l2 and l3 switch image to gns3 client (Click edit> IOS on UNIX> IOU> Click New> Select "Run the IOU device on the GNS3" then click next> Name it and select and click browse and select the image file.
Step 02: Open winscp
Input hostname gns3 vm IP
Port: 22
Username: gns3
Password: gns3
Then click login
After login you need to upload CiscoIOUKeygn3f.py file to /opt/gns3/images/IOU
Step 03: Go to gns3 vm and select Shell
Run following command
> cd /opt/gns3/images/IOU/
> sudo python3 CiscoIOUKeygen3f.py
After run python script go back to winscp
And click refresh in gns3 vm end
Then you will see iourc
Drug this iourc file and drop to your local drive.
After all again go back to gns3 client Click edit > Preference> IOS on UNIX > Click browse and open the iourc.txt file
Follow this steps carefully also follow the video 1st to last.
Thank you for your videos. please can i use gns3 2.2.25 version with this same steps?
Error
No such file or directory
Or
32bit binary not installed
Why
unable to see /opt in root
how to do this with web client
I have downloaded the Cisco IOS but its opening in GNS file extension . While uploading from GNS3 .bin file is not showing. Pls Help
did you run python script ?
@@MdAnwarHossain Not Yet
Step 01: upload Cisco l2 and l3 switch image to gns3 client (Click edit> IOS on UNIX> IOU> Click New> Select "Run the IOU device on the GNS3" then click next> Name it and select and click browse and select the image file.
Step 02: Open winscp
Input hostname gns3 vm IP
Port: 22
Username: gns3
Password: gns3
Then click login
After login you need to upload CiscoIOUKeygn3f.py file to /opt/gns3/images/IOU
Step 03: Go to gns3 vm and select Shell
Run following command
> cd /opt/gns3/images/IOU/
> sudo python3 CiscoIOUKeygen3f.py
After run python script go back to winscp
And click refresh in gns3 vm end
Then you will see iourc
Drug this iourc file and drop to your local drive.
After all again go back to gns3 client Click edit > Preference> IOS on UNIX > Click browse and open the iourc.txt file
Follow this steps carefully also follow the video 1st to last.
After all if you fail let me know I will help you remotely run anydesk and give me anydesk I'd to my email. anwar8048@gmail.com
thanks! share the image please 😉
In video description it is there
drive.google.com/drive/mobile/folders/1HYyaJ0kXB3XuMLoRFMyl20mo79omXv8n?usp=drive_open
Hello , thank your share,i have a question can you help me? the L3 image no switch port command . it is correct image?
same issue! seems its a ROUTER IMAGE and not a L3 switch os !
Found the answer : ruclips.net/video/HwDcTzFPm1k/видео.html
Thanks for your training videos. my GNS3 show below. " Could not start IOU: [Errno 2] No such file or directory: '/opt/gns3/images/IOU/i86bi-linux-l3-adventerprisek9-15.4.1T.bin': 32-bit binary support is probably not installed" What's that meaning ? Could you please help
Thanks a lot