comes client, installed the D2s xenon, you have to change only the projector . if you set H1, then you need a new lamp and ballast. it is more expensive to change than just the projector .
Die Schrauben mit den roten Gummis dienen dazu, um den Xenonprojektor zum Reflektor vom Fernlicht auszurichten. Wenn man die einfach nur anzieht, stimmt die Einstellung vom Scheinwerfer überhaupt nicht mehr. man kann den Scheinwerfer zwar dann außen an den normalen Einstellschrauben wieder einstellen, das originale Fernlicht leuchtet dann aber überall hin, nur nicht auf die Straße. Will man es richtig machen, muss man das originale Fernlicht mittels Scheinwerfer Einstellgerät richtig ausrichten, und dann das Abblendlicht von hinten durch den Deckel mittels den Schrauben mit den roten Gummis passend auf die Linie im Einstellgerät mit dem Hell/Dunkel Verlauf und 15Grad Knick einstellen. Ist etwas fummelig, aber nur so stimmt es nachher wirklich. Ich werde bei meinem Umbau jetzt versuchen, das Maß an den Schrauben abzunehmen und genau so wieder einzustellen. Wird nicht 100% stimmen, aber deutlich besser als nur anzuziehen.
Has the video changed? In one video you have to cut the original screw posts off. And in this one you do not and use a plate and screw into the screw posts. Just brought the kit and was wondering which one I will have to do. Thank you
Thanks for the order and good question. We also have a video with a different projector, but that is much harder to install, this is the correct one. But we also upgraded the projector from the Mini H1 to the TR mini, so the projector you have received is a bit different, but the basics of the mounting etc. is the same. When you have questions, please contact us :-) retrofitlab.com/pages/contact
Hello, retrofit I have a Ford Mondeo mk3 with optical bi-focal, But No xenon andar no projector/lens. I want to get a projector with lens in my optical. I've been seeing on your site but do not know is the most suitable. will that help me? thank you!
comes client, installed the D2s xenon, you have to change only the projector .
if you set H1, then you need a new lamp and ballast. it is more expensive to change than just the projector .
can i add the lamp to an older halogen only headlamp?
Die Schrauben mit den roten Gummis dienen dazu, um den Xenonprojektor zum Reflektor vom Fernlicht auszurichten. Wenn man die einfach nur anzieht, stimmt die Einstellung vom Scheinwerfer überhaupt nicht mehr. man kann den Scheinwerfer zwar dann außen an den normalen Einstellschrauben wieder einstellen, das originale Fernlicht leuchtet dann aber überall hin, nur nicht auf die Straße. Will man es richtig machen, muss man das originale Fernlicht mittels Scheinwerfer Einstellgerät richtig ausrichten, und dann das Abblendlicht von hinten durch den Deckel mittels den Schrauben mit den roten Gummis passend auf die Linie im Einstellgerät mit dem Hell/Dunkel Verlauf und 15Grad Knick einstellen. Ist etwas fummelig, aber nur so stimmt es nachher wirklich. Ich werde bei meinem Umbau jetzt versuchen, das Maß an den Schrauben abzunehmen und genau so wieder einzustellen. Wird nicht 100% stimmen, aber deutlich besser als nur anzuziehen.
Has the video changed? In one video you have to cut the original screw posts off. And in this one you do not and use a plate and screw into the screw posts. Just brought the kit and was wondering which one I will have to do.
Thank you
Thanks for the order and good question. We also have a video with a different projector, but that is much harder to install, this is the correct one. But we also upgraded the projector from the Mini H1 to the TR mini, so the projector you have received is a bit different, but the basics of the mounting etc. is the same. When you have questions, please contact us :-) retrofitlab.com/pages/contact
Yes!!! I'm disappointed!!! and which would you advise for D2S???
Have you ever done a set of mk2 st225 projectors that already has xenon
Hello, retrofit
I have a Ford Mondeo mk3 with optical bi-focal, But No xenon andar no projector/lens. I want to get a projector with lens in my optical.
I've been seeing on your site but do not know is the most suitable. will that help me?
thank you!
+Retrofitlab Yes I have.
Excellent ... that's what I want! :-D
Also seems some steps missed
Which steps are missing for you?