HOW TO: Linear-18 Elite install to Yaris GR

Поделиться
HTML-код
  • Опубликовано: 9 сен 2024
  • High performance auxiliary lighting for the Toyota Yaris GR never looked so good, or performed so well. In this video, Lazer Lamps Integration Specialist, Aaron Green, shows how to install a Linear-18 LED driving light to the Yaris GR, with the light fixed to the crash bar for a secure discreet install that really delivers come nightfall.

Комментарии • 21

  • @elliottbates62
    @elliottbates62 3 года назад +11

    Would have been nice to see the end result illuminated at night

    • @Lazerlamps
      @Lazerlamps  3 года назад +1

      Elliott we have separate videos showing lighting performance...here's the one for the Linear-18 Elite - ruclips.net/video/ITWHcvw1-YI/видео.html 👍

  • @bananamacaca
    @bananamacaca 3 года назад +3

    Can it be triggered by fog light? By using a wire to connect to one of front fog light. I think many people don't want to break their original cables.

  • @207GTBEE
    @207GTBEE Год назад

    Nice job Aron!

    • @Lazerlamps
      @Lazerlamps  Год назад

      Thank you buddy!

    • @207GTBEE
      @207GTBEE Год назад

      @@Lazerlamps I’m looking forward to doing that one I spoke to you about on the phone yesterday here at 4x4at.

  • @samfisher7242
    @samfisher7242 3 года назад +1

    Watched till the end then didn’t even turn it on? 😅🥺

  • @CaptainNetzkrank
    @CaptainNetzkrank 2 года назад

    I am about to order the LINEAR-18 ELITE WITH I-LBA for my GR Yaris. Does the installation vary in any way?

    • @Lazerlamps
      @Lazerlamps  2 года назад

      Good choice Jack. The light comes with the required wiring harness. Other than an extra switch to turn the i-LBA function on/off the wiring to the vehicle is exactly the same as if you were mounting the Linear-18 Elite in the video.

  • @danielzafir5749
    @danielzafir5749 3 года назад

    Why didn't you take Can High and Can Low also from the OBD2?

    • @Lazerlamps
      @Lazerlamps  3 года назад +1

      Hi Daniel, The OBD2 port does not show high beam activation on the Yaris, therefore the interface will not work there. It has to be taken from the back of the speedometer where the signal is given.

    • @Humppa800
      @Humppa800 Месяц назад

      Use swedish wireless Xbb odb dongle then...

  • @binskee677
    @binskee677 3 года назад

    Which lamp would you suggest for the scandinavian winter that can be fitted this way? And can you fit a separate switch/button for the lamp?

    • @Lazerlamps
      @Lazerlamps  3 года назад +1

      Hi Albin. Depends what you preference is in terms of size, beam pattern, budget...our most popular product is the Linear-18 Elite. Our wiring kits come with the option to connect directly to the high beam, and/or via a switch.

    • @binskee677
      @binskee677 3 года назад

      @@Lazerlamps perfect! thank you very much for the response

  • @benfisher9042
    @benfisher9042 2 года назад

    How does that installation affect the manufacturers warranty?

    • @Lazerlamps
      @Lazerlamps  2 года назад

      Hi Ben, we would suggest that you check with the garage you purchased the vehicle from as some are fine with it, whereas others are not. It is usually at the dealers discretion.

  • @STRampo500
    @STRampo500 2 года назад

    hi do you offer fully fitted prices on your items?

    • @Lazerlamps
      @Lazerlamps  2 года назад

      Hi. We can provide you a quote. Please drop an email to sales@lazerlamps.com. You would need to bring the vehicle to us though (Harlow, Essex), or we can recommend someone closer to you to do the install.

  • @davidholding5335
    @davidholding5335 2 года назад

    I’d love on if these but at 700 plus without installation it’s madness 😂😂

    • @Lazerlamps
      @Lazerlamps  2 года назад

      How are you getting on with your Linear 18?