Good stuff! You probably already know that you can also “triple tap” the clip with good audio to create a copy of the audio track from that video. That way you can have a completely separate audio track and mute all video tracks.
Please, please, please continue with the LumaFusion tutorials. I’ve watched many tutorials some of which I watched multiple times with little understanding of the content but I’m absorbing your info with ease!
Thanks for this tutorial! I went with my family to a parade. While I filmed from one side of the road, another family member filmed the B-roll from the other side. I then used some of the louder noises of the parade as clappers.
You do some of the best, if not the best explanations of this app. Thanks! I’d love to see how to plug in 6 video clips into the timeline and have them all show simultaneously...
How does this not not have a mil subs show him some love ,the tutorials are great and so informational ,this guy is a wonder he’s helped me with everything, thank you so much
If I have a 20 minute audio clip that has 3 5minute video clips that start a few minutes after the audio start, can I drop the video clips onto their sync points if the audio file is already loaded. Will the first video always snap to 0:00
How do you view the a track footage without cutting out the b track footage? I like looking at both views to find the best angle at the time. Very frustrating.
What you can do is just look for any wave form similarities in the audio. Even when we talk we get spikes and usually it’s enough to be able to line them up decently
What if videos do have a variable framrate (VFR) and audio is not synced over several clips? Then I will end up with non synced audio. I know that there is a workaround with handbrake on the Mac, but then I cannot use ipad standalone.
Is there a way to turn the behavior at 5:27 off? I want to re-align the video and control-listen at that second but whenever I release the pencil after dragging one of the video to the spot where I think they are in sync (clapping wasn‘t possible on this recording, it‘s a singer and then the same guy plays piano to it so it didn‘t happen at the same time, we needed it on two seperate tracks) it jumps back to the beginning of the video. In your video it wasn‘t as bad because your sync point was right at the start, but mine is 50 seconds in.
So would this process work if I recorded myself playing the drums and I had an audio track I would use for reference to sync with the clean audio coming from an audio recorder? Once I have everything in sync, would I be able to delete the reference track and keep the clean audio track for the final edit with this process you shared? With Final Cut Pro, I used a program called Pluraleyes to do all the syncing but I am using LumaFusion more and more these days. Thank you!
I just realized you never responded to my question and here I sit editing a drumming video and I’m having a time trying to sync the audio. Why can’t the audio clips move freely on the timeline and not have snapping turned on?
@@cre8tivity06 Yes, I would love LF to work like Adobe Rush here - no snapping. But LF snaps to the next frame. So I use at least 48 fps to make sure the snapping isn’t so much of an issue. I might use 60 going forward to be honest, the problem disappears at high frame rates. Maybe LF will address this in the next version.
I try to do that to line up audio but there's some kind of magnet action happening where it just jumps back instead of staying where I dragged it, any ideas?
I think that’s LumaFusion snapping to the next frame of your video. The only solution is to up the frame rate, I think. Try 48 or 60 and you will be able to adjust more precisely.
Awesome video, thanks! I’m loving the Luma Fusion tutorials. Very clear and easy to follow. I’m trying to go 100% iPad editing. Well done, from a fellow Canadian 🇨🇦. I have a question about the WD My Passport Wireless Pro drive. I recently bought one for the purpose of using it with Luma Fusion. I put a bunch of files on it from SD cards and the iPad with their app. Then when I plug the drive into my Windows computer it says the drive needs to be formatted before I can use it. Do you know anything about this? Thanks.
It would be nice if Lumatouch could include a function to just search for a short audio section on basis of the waveform and vertically align that, a sort of Shazam sequence. Then it would be 100% in sync and no need for this clapping. Until they do, this tip is helpful.
Hi sorry for the stupid question lol, but will this work for example if I’m recording gaming footage from my PS4 device and also have use my iPhone camera to record myself like a webcam?
Thanks for sharing these tutorials I find them so helpful if you could update with the latest version of Luma fusion would be fantastic would love to see a tutorial on making opening credits and closing scenes once again thanks for sharing your channel is awesome
Hello. Is it possible to capture HDV video from minidv camera with lumafusion and thunderbolt to firewire adapter on ipad pro 2017 ? If its not possible is there any other app that works ? Thanks !
Is there any way of nesting multiple video layers in lumafusion? Say I have a snow layer on top of a video and i want this layer to follow the transition i do on the clip underneath, do i have to apply the transition with copy paste effect on two clips every time or can you nest clips like in Premiere for example?
I understand. This didn't help me one bit. Hours and hours I am about to give up on lumafusion!! I have 3 different camera angles same video. How I go from one track to another to mix views is beyond me!!🥴
Apparently it is coming, Lumafusion is releasing a new update soon version 2.4 with many new features but the next update after that is supposed to include true multi cam editing. The way they explained how it’s going to work sounds like it’s gonna be pretty intuitive. I am looking forward to it
can you please tell me if there's a way tyo fully seperate audio from videos ? i just recorded a game on my xbox and for some reason the audio doesn't precisely line up with the video in lumafusion even though the spikes look to be on the same spots. i just need to seperate so that i can cut a bit off the video and line in up that way but lumafusion doesn't let me. i can do it with the audio but some reason not with the video, even though they are already seperated.
@@AirPhotography i know how to seperate the audio from the video, i just can't make it really loose from each other so that i can do what i want. i need to cut a bit from the video and line it up with the audio, but for some reason the audio track get's cut too no matter what i do.
I stack tracks on top of another when I edit but then it suddenly stopped stacking at the 7th video and It won’t let me stack anymore videos, any tips on how to fix this?
Something I have needed to do is move the audio a bit since it isn’t always synced with the image. Triple-tapping automatically separates the audio track, and then it can be adjusted as needed. Typically I have to move it 4-5 frames, otherwise it looks like a poor dub.
ahh so manually. I think my work follow will be da vinci resolve to sync it, then export my video to lumafusion to edit it! (One day, I'll learn Da Vinci... but it seems a bit complex and powerful!)
And here I was thinking Luma Fusion would do all this automatically for me. Yet another reason why iPad applications are no good. HOWEVER, worse is nothing. So if this is all you’ve got, by all means get creative and problem solve.
Good stuff! You probably already know that you can also “triple tap” the clip with good audio to create a copy of the audio track from that video. That way you can have a completely separate audio track and mute all video tracks.
very clear and step by step. Thanks
Please, please, please continue with the LumaFusion tutorials. I’ve watched many tutorials some of which I watched multiple times with little understanding of the content but I’m absorbing your info with ease!
There are many more tutorials I plan on making
Thanks for this tutorial! I went with my family to a parade. While I filmed from one side of the road, another family member filmed the B-roll from the other side. I then used some of the louder noises of the parade as clappers.
You do some of the best, if not the best explanations of this app. Thanks! I’d love to see how to plug in 6 video clips into the timeline and have them all show simultaneously...
Thank you I have more tutorials coming in the near future
You want a tutorial where you have six small videos playing all same time on the screen?
Air Photography exactly. It’s a much touted feature that folks are talking about, but no one is showing how to put that together. Thanks!
@@AirPhotography Did you ever make that video?
Thanks Nice video, please more about lumafusion🙏
How does this not not have a mil subs show him some love ,the tutorials are great and so informational ,this guy is a wonder he’s helped me with everything, thank you so much
Thank you very much for your kind words and I’m glad you enjoyed my video
Air Photography no problem you deserve it you awesome man
Enjoying the LumaFusion videos.
We really need more LumaFusion tutorials. Thanks for this one.
You have the best tutorials I’ve ever seen. Thank you!
Simple yet effective.
Thanks for sharing
Thanks for the info very helpful
Superb tutorial. Thank you
This tip is about to make the next episode of my show extraordinary and I'm excited for that! 😀
Appreciate your time doing this. Thank you.
This is really helpful. Thanks for your amazing vid. Subscribed immediately !!
You are a gifted teacher!
Thank you very much I’m glad you like my tutorials
You are still , a SAVIOR!!!
Once again ...That was enough simple and helpful video/
You teach so well please give more
If I have a 20 minute audio clip that has 3 5minute video clips that start a few minutes after the audio start, can I drop the video clips onto their sync points if the audio file is already loaded. Will the first video always snap to 0:00
Really clear and helpful
How do you view the a track footage without cutting out the b track footage? I like looking at both views to find the best angle at the time. Very frustrating.
Explanation is clear and easy, as usual. What if I did not clap, how can I sync my audio and video?
Thank you.
What you can do is just look for any wave form similarities in the audio. Even when we talk we get spikes and usually it’s enough to be able to line them up decently
Thanks man you are the best
Thank you I’m glad you enjoyed my video
What if videos do have a variable framrate (VFR) and audio is not synced over several clips? Then I will end up with non synced audio. I know that there is a workaround with handbrake on the Mac, but then I cannot use ipad standalone.
Is there a way to turn the behavior at 5:27 off? I want to re-align the video and control-listen at that second but whenever I release the pencil after dragging one of the video to the spot where I think they are in sync (clapping wasn‘t possible on this recording, it‘s a singer and then the same guy plays piano to it so it didn‘t happen at the same time, we needed it on two seperate tracks) it jumps back to the beginning of the video. In your video it wasn‘t as bad because your sync point was right at the start, but mine is 50 seconds in.
this was so good n easy to understand!
Being a LumaFusion user, can you tell me if the 32 bit wave audio files produced on the Zoom F3 are supported in LumaFusion?
This is awesome. Thank you
Thank you and thanks for watching
So would this process work if I recorded myself playing the drums and I had an audio track I would use for reference to sync with the clean audio coming from an audio recorder? Once I have everything in sync, would I be able to delete the reference track and keep the clean audio track for the final edit with this process you shared? With Final Cut Pro, I used a program called Pluraleyes to do all the syncing but I am using LumaFusion more and more these days. Thank you!
I just realized you never responded to my question and here I sit editing a drumming video and I’m having a time trying to sync the audio. Why can’t the audio clips move freely on the timeline and not have snapping turned on?
@@cre8tivity06 Yes, I would love LF to work like Adobe Rush here - no snapping. But LF snaps to the next frame. So I use at least 48 fps to make sure the snapping isn’t so much of an issue. I might use 60 going forward to be honest, the problem disappears at high frame rates. Maybe LF will address this in the next version.
@@bradsballads3041 Oh okay. Maybe I will try 60fps next time as well and see if I have better results! Thanks for the response.
Is there a way to pause screen recording until audios are synced with each other?
I try to do that to line up audio but there's some kind of magnet action happening where it just jumps back instead of staying where I dragged it, any ideas?
I think that’s LumaFusion snapping to the next frame of your video. The only solution is to up the frame rate, I think. Try 48 or 60 and you will be able to adjust more precisely.
Suppose I want to slide the b-roll footage to the beginning of the clip, is there a shortcut to do this rather than tediously dragging it?
Awesome video, thanks! I’m loving the Luma Fusion tutorials. Very clear and easy to follow. I’m trying to go 100% iPad editing. Well done, from a fellow Canadian 🇨🇦.
I have a question about the WD My Passport Wireless Pro drive. I recently bought one for the purpose of using it with Luma Fusion. I put a bunch of files on it from SD cards and the iPad with their app. Then when I plug the drive into my Windows computer it says the drive needs to be formatted before I can use it. Do you know anything about this? Thanks.
Audio sync no automatic like premiere pro ???
Not yet but I do believe it will be coming in a future update from what I have read
It would be nice if Lumatouch could include a function to just search for a short audio section on basis of the waveform and vertically align that, a sort of Shazam sequence. Then it would be 100% in sync and no need for this clapping.
Until they do, this tip is helpful.
Do they have that option by now?
Nice coaching man.
Thanks! Great info.
is lumafusion have autosync? or just manually?
Just manually at this point
Very simply and well explained, thanks
Thanks - excellent tutorial. New subscriber!
Hi sorry for the stupid question lol, but will this work for example if I’m recording gaming footage from my PS4 device and also have use my iPhone camera to record myself like a webcam?
Your a great teacher mate, thank you for the video, subscribed 👍
These are soooo helpful. Thank you. Keep up all of your great work.
Legend
Thanks for sharing these tutorials I find them so helpful if you could update with the latest version of Luma fusion would be fantastic would love to see a tutorial on making opening credits and closing scenes once again thanks for sharing your channel is awesome
Great tutorial. Keep them coming!!!
Thanks. Many more to come 👍
Hello. Is it possible to capture HDV video from minidv camera with lumafusion and thunderbolt to firewire adapter on ipad pro 2017 ? If its not possible is there any other app that works ? Thanks !
Very impressed with you!
Simple and effective! Thank you!
Does anyone know if Luma Fusion can edit 360 video?
Yes! You can find 360 exporting option just before rendering
thank you
Is there any way of nesting multiple video layers in lumafusion? Say I have a snow layer on top of a video and i want this layer to follow the transition i do on the clip underneath, do i have to apply the transition with copy paste effect on two clips every time or can you nest clips like in Premiere for example?
How did you link the tracks?? Please tell me! I beg of you! 🙏
I understand. This didn't help me one bit. Hours and hours I am about to give up on lumafusion!!
I have 3 different camera angles same video.
How I go from one track to another to mix views is beyond me!!🥴
This multi-angle sync and editing is the only reason I still use FCPX. It‘s so much easier and faster. I wish lumafusion would add this feature.
Apparently it is coming, Lumafusion is releasing a new update soon version 2.4 with many new features but the next update after that is supposed to include true multi cam editing. The way they explained how it’s going to work sounds like it’s gonna be pretty intuitive. I am looking forward to it
can you please tell me if there's a way tyo fully seperate audio from videos ?
i just recorded a game on my xbox and for some reason the audio doesn't precisely line up with the video in lumafusion even though the spikes look to be on the same spots.
i just need to seperate so that i can cut a bit off the video and line in up that way but lumafusion doesn't let me.
i can do it with the audio but some reason not with the video, even though they are already seperated.
Just triple tap on the video file and it will separate the audio onto its own audio track
@@AirPhotography i know how to seperate the audio from the video, i just can't make it really loose from each other so that i can do what i want.
i need to cut a bit from the video and line it up with the audio, but for some reason the audio track get's cut too no matter what i do.
@@AirPhotography oh i finally figured it out !
Where do you store your work footage and how do you get it into your iPad?
Excellent. Thank you.
can you make a tutorial on how to add sound effects on Lumafusion using epidemicsound and itunes on ipad pro.
I stack tracks on top of another when I edit but then it suddenly stopped stacking at the 7th video and It won’t let me stack anymore videos, any tips on how to fix this?
Is this possible on Luma fusion for iPhone?
Is it possible to loop a video in lumafusion? (Like an auto repeat)
-thx
Is it possible to have 3 videos in 1 frame with luma?
Yes you can
Excellent! Says the noo-B
Super useful, thank you! Looking forward to the next tutorial 🙏
Something I have needed to do is move the audio a bit since it isn’t always synced with the image. Triple-tapping automatically separates the audio track, and then it can be adjusted as needed. Typically I have to move it 4-5 frames, otherwise it looks like a poor dub.
How did you do that title sequence?
great video though !
ahh so manually. I think my work follow will be da vinci resolve to sync it, then export my video to lumafusion to edit it! (One day, I'll learn Da Vinci... but it seems a bit complex and powerful!)
Take a sip of your drink every time he says “go ahead”
Nice
How to select multiple clips?
Unfortunately, there’s no batch or multi select in the current version of LumaFusion, AFAIK.
5:35
🙌🏾
sorry for my lack of patience, but i think this vid will be better if you will go straight to the procedure and not.much of the fluff.
Almost first
Man! You have ham hog hands and forearms dude. LOL
And here I was thinking Luma Fusion would do all this automatically for me. Yet another reason why iPad applications are no good. HOWEVER, worse is nothing. So if this is all you’ve got, by all means get creative and problem solve.
Great job! Thank you.