Magnetic Swarf Collector DIY
HTML-код
- Опубликовано: 6 окт 2024
- Yes, I know ... I can go to the harbor freight and buy something similar, but where is the fun of making stuff? ;)
To implement this project I used:
The Copper tube 22 mm x 330 mm
-The Handlebar motorcycle
The M5 threaded rod 340mm
two plastic plugs
6 neodymium magnets 20mm x 3mm (You see eight on the video, but I removed two because there were too many of them.)
12 m10 washers
12 m5 washers
9 nuts m5
plastic m5 cap with the handle
I am convinced that if you do not have a lathe, you can also make such a magnetic collector for chips. All you need to do is find the washers with an outside diameter of about 20-21 mm.
Washers are needed for the collector to work properly. Thanks to them, all magnetic forces are transferred to their sides (like a welding magnet).
Yes, I have been drilling neodynamic magnets. I have no idea if you can do it or not, but they work properly and nothing bad happened to them (except two, because they crack during drilling: D)
When you will re-drill them, remember not to overheat them, because they will lose their properties.
The whole construction works really well and I can definitely recommend it.
I am sorry that recently I have been adding simple and uncomplicated projects, but I had a renovation of the workshop, beside I am working on a very interesting vehicle and I do not have too much time. You have to forgive me :)
--------------------------------------------------------------------------
My social media:
FB: Made in Poland
Insta: made_inpoland
--------------------------------------------------------------------------
These videos may also interest you:
• Change CIRCULAR SAW to... - Change CIRCULAR SAW to CHOP SAW
• DIY Belt Grinder 2x48"... - DIY Belt Grinder 2x48" [PLANS]
• Standing/Mobile Burnis... - Standing/Mobile Burnishing Machine
• Wood Stove from Car ri... - Wood Stove from Car rims DIY
• Making horizontal DRIL... - Making horizontal DRILL STAND
--------------------------------------------------------------------------
Music by Anno Domini Beats (youtube library)
Intentions
Stand
--------------------------------------------------------------------------
Business contact: darus627@gmail.com - Наука
Consider supporting us on RUclips by using the button "JOIN" or click on this link:
ruclips.net/channel/UC8KQ6_RNAvc7a3B5hZ980iQjoin
Jak zawsze zawodowo :)
W 5:45 poczułem się jak bym oglądał telezakupy mango. Zupełnie przypadkiem kopnąłeś wiadro i tak się złożyło że akuratnie miałeś magnetyczną pałę przy sobie która uratowała Cię z opresji :)
Nice work. Just because the projects are simple, doesn't mean they are not interesting! Loved the video.
Awesome dude!
Thank you very much!!! :)
two of my favourite channel here 👌
"Ma rozmach skurwysyn"
I've always said that the simplest concepts produce the best designs. It's the real world realisation of Einstein's famous saying: "Things should be as simple as possible, but no simpler!".
GREAT idea, can be modified slightly in multiple simple ways. Using plastic tubing, using electro magnet, making it really small for magnetically attractive parts, including many electronic components which often have magnetic leads (not all sadly). So many ideas now! Great job!
I am sorry that recently I have been adding simple and uncomplicated projects, but I had a renovation of the workshop, beside I am working on a very interesting vehicle and I do not have too much time. You have to forgive me :)
Made in Poland do you wanna do a workshop tour
Nothing to forgive, small but your projects are interesting as always! Good job. Greetings from Southern France.
Simple ideas are often the best.
If we have to forgive you genius projects like this than keep being busy! Greetings from Poland!
It,s nothing to forgife, your small projekts are beautyfull, i Love it.
Best Greets , Michl from South Germany Bavaria
That was very impressive (design, making & demonstration). Loved the "kick the bucket" at the end.
Great idea! J. An old mechanics trick for magnet clearing is to put your magnet inside a piece of plastic bag or a rag/paper towel and that helps clean the schmoo off
Mike O'Barr same way I do it. Skookum.
As frig! KYDIAV.
Mike O'Barr I love love that,channel
This is a great idea! Thanks for sharing! This gave me the idea to make one with electromagnetism than it can be turned off.
What a great idea!! Also, if you put a little piece of scrap wood or soft metal under the things you are drilling in your vice you wont keep drilling holes in your vice. Not a problem now while there are only a couple of holes but once it looks like swiss cheese you will find it hard to get things flat in the bottom of the vice. Great video, keep up the good work.
Najlepsza „yutubowa” złota rączka!!!
Oby tak dalej.
NEVER NEVER NEVER EVER! Clear chips with your hands, NEVER! Very cool project. Very cool.
I am always watching the video. Sense is also good, it will be a sample when making it!
You should consider making that as a patent for machinists who cant really bend down to sweep up all the metal fragments. Great idea!
Ive never seen one of these before, it would come in handy
Bravo... Bravo.... Bravo..... 👏👏👏👏👏..... I have become a graet fan of ur work. Great video
Great idea...thanks. Just ordered some 20x4mm magnets off ebay. They already have a 5mm hole, so I won't have to drill them. I'm planning to use some PVC electrical conduit rather than the copper pipe...hope that will still work okay. Thanks again...from Australia
I wish someday we can collect the dust like this ....
Good job dear
J'ai découvert ta chaine il y a peu... j'ai regardé beaucoup de tes vidéos, du super boulot !
I have the same tool by evolution and it's a very useful tool. Good job 👍
My DIY MASTER!
Молодец! Просто, удобно и технологично сделал все. И видео смонтировал приятно.
Every shop should have one!
nice idea bro. need to make something like that.
Love it mate, can’t believe how fast your channel has grown congratulations
That was a fun and usefull project!
We will be looking forward to see your vehicle project on your chanel!
Pomocne urządzenie robiłem coś takiego tylko z magnesem neodymowym w osłonie z aluminium.Gratuluje pomysłu.
...i zapanował porządek :)
Super pomysł, pozdrawiam ;)
brilliant! now make one for wood chips! xD
Already exists...called a vacuum cleaner...hahahaha
Looks like a very handy tool.
Your project is a good excuse to go out to the workshop!!
What a terrific idea.
Brawo jak zwykle super film 👏👏👏
my fitter/machinist teacher would give you an upper cut for leaving the chuck handle in the lathe like that.
Me - "oh sweet what a great idea, i'm going to do this"
*Metal lathe enters the chat.*
Me - 😑
That is awesome! Well done
Bardzo przydatny sprzęt. Dobra robota.
Awesome! I'm going to make one of these...
You deliberately kicked that bucket over :-) nice idea tho I like it!!!!!
Really good Idea and awesome Job👍
Genialne w swej prostocie! :)
Awesome little tool
a simple and functional idea...
Bardzo praktyczna rzecz. Można dostać magnesy z większymi otworami i wtedy odpada kłopotliwe wiercenie. Poza tym magnesy neodymowe są po to pokryte warstwą galwaniczną żeby nie ulegał utlenianiu bardzo aktywny neodym wchodzący w skład spieku, z którego są zrobione: pl.wikipedia.org/wiki/Magnes_neodymowy
very cool idea, well done !
Prawie jak EVOLUTION CYCLONE :))
Kiedyś chciałem zrobić na elektromagnes ze starej lampy 18v, ale kupiłem evo tylko że za granicą, bo w Polsce to są chore ceny niektórych narzędzi. Super pomysł. Pozdrawiam
5:43 jakie szczęście ze miałeś go akurat w ręce😉
O widzę, że potrafisz robić cuda z niczego. Gratuluję pomysłowości. Ciekawe czy byś potrafił zrobić piłę mieczową do cięcia pod kątem 60 stopni. (Żaden zagraniczny twórca jeszcze nie zrobił takiego czegoś) Super filmy. Powodzenia z kanałem:-D
You have wonderful ideias...
its simple, yes, but its also cool since i can do this with almost zero investments and it will be really nice to have since it saves time, vacuum filters and cutting fingers :)
Swarf :
Dear diary,
Today I learned a new english word from a Polish bloke.
Très bonne idée, bravo.
NeoDYMOwych, Darek. Teraz słabo tłumaczy na inne języki, gdy napisałeś "neoDYNAMOwych".
Urządzenie w prostocie - genialne!
chodziło mi po głowie coś podobnego w wersji pudełkowej, ale ten pomysł z miedzianą rurką jednak przebija wszystko :)
Éssa invenção fico top de mais parabéns amigo 👍👍👍
Great idea!
That’s pretty cool 👍
Super Darek twoje kolejne urządzenie. Pozdrawiam
czarownik Darek i jego czarodziejska różdżka :D
Prawie jak Harry Potter xD
Amazing, dude! I think I'm going to make something similar! 😀
Much easier to double bag a magnet. I used a speaker magnet for years. When its time to get rid of the chips just hold the first bag with one hand and pull the magnet out with the other.
Manick N That's true! 😊
Now I'm looking around the garage for parts to make one
Le agradesco por sus videos son de mucha utilidad saluso desde el salvador
Może piaskarka ? wiem że są już na YT, ale w pana wykonaniu proces powstawania jest genialnie dokumentowany. pozdrawiam
Great video
Cool idea
Very clever!
Very good!!! 👌👌👌
Great Job!
Good design
Nie głupi przyrząd ;D
Pozdrawiam.
Fajne :) wincyj filmikow, czekamy :D
I thought to do this project a few years ago, maybe someday. But, in my design, the end part is made from plastic instead of metal (copper?), I don't know yet if is a good idea, we'll see. Thanks for sharing !
👏👏👏👏 Parabéns, ideia muito boa!!!
Great stuff
I'm shocked that you didn't use a mains voltage electromagnet for this. Lol
random groan
He is the wrong Polarity ya goose !
How do you prevent the magnets from sticking to the tools (e.g. drill press, lathe) while cleaning them? I always have that problem.
to me the problems with magnets are that they induce magnetism to other metals and then they begin to attrac the metal dust
Muito bom, gostei da ideia!
I'm still waiting for the one that works for aluminum & brass.
1 flatlander :D
You need better magnets, or need to find a way to reduce the distance between the wand and the chips.
Bardzo sprytny patent! Pozdro! :)
what is your profession.? you are one of the very best
Proponuję zastosować jakiś pierścień w połowie rurki uniemożliwiający przesuwanie się opiłków (czy też innych przedmiotów) w górę wraz z magnesem ;)
fajne. Może kolejny projekt to filtr cyklonowy na bazie pachołka drogowego i np silnika z odkurzacza?
A na marginesie, może spróbujesz tworzyć projekty bez zaawansowanych narzędzi (np tokarka) ?
Wiem że efekt końcowy jest lepszy, jednak myślę że wielu subskrybentów ogląda Ciebie jako inspirację co może samemu zrobić w własnym warsztacie, a brak takich narzędzi zabija próby naśladowania Ciebie.
Ale generalnie gratulację bo kanał jest na coraz wyższym poziomie.
Podkładki na pręt, nakrętkami zabezpiecz po obu stronach, zamocuj na wiertarke i heja z papierem sciernym. Dla uzyskania lepszego efektu użyj mniejszej ilości podkładek i płaskiego pilnika. Myślę, że obejdzie się bez tokarki.
Complimenti idea geniale👌👏👏
Ja wykorzystalbym elektromagnes. Miałbym kontrolę nad mocą i momentem wyłączenia bez efektu lecenia opiłków w każdą stronę. Ciekawe jak by dział mechanizm składający się z takiej tuby i izolatora magnetycznego wewnątrz. Może by to lepiej działało.
mam nadzieję że w ramach rekompensaty ;) pokażesz warsztat po remoncie i ten tajemniczy pojazd? :d
Fuck!! , you are really good 🤔
You are the fucking artisan master of Poland .
GOOD JOB!!👍
Genialne ! 😀👍
Cool video, now where’s the one for aluminum?
I find it hard to believe that you just happened to have the wand in your hand when you kicked the bucket
That was staged, i don't believe that was coincidence
He's making a video, it's all staged.
cool idea
Очень круто!!!!
haces unos trabajos impresionantes un saludo compañero
Супер возьму на заметку
📍- Fuck...!
📍- I usually wrap the Magnet in paper 😂
the neodymium magnet dust is not so healthy product. And where you drilled it it will corrosion all time. but the idea is good
Very nice but how will you clean up the magnetic chips from the magnet off your lathe 😉
Ha ha...you are a genius!!!👍
Nice, but why not electomagneets?
Гениально! 👍