800 Watt 12/24 volt Small Wind turbine by B & C Wind, Newest Model, Huge Parts List below
HTML-код
- Опубликовано: 1 авг 2024
- FULL LIST BELOW - Model 800w 12/24 & 48v s.click.aliexpress.com/e/5dnnyP8k The great 1000 watt 24/48 bit.ly/33skFSo , BIG 2000 watt wind systems bit.ly/31bMm0v *UPDATED ⬇️ HS 500 watt REAL wind turbine s.click.aliexpress.com/e/BztCS7I0 3/5/6 blade 12/24/48 volt From B&C (LOW WIND MODEL s.click.aliexpress.com/e/bE1zQnPw ) LOW WIND 600watt is s.click.aliexpress.com/e/_99l1XF , It makes wind power for almost everyone. Full GE store options s.click.aliexpress.com/e/_AFDRgV
✨OTHER options - GE-500 watt High Output s.click.aliexpress.com/e/Igjt80g 3 or 5 blade, 12,24,48 volt
😍Full DIY OFF GRID WIND POWER PARTS LIST
SQL100 Rectifier ebay.us/C0L2j8 or BAO-Amico amzn.to/2DkP4q7
3/8" terminals for Rectifiers ebay.us/8mBdmY ,monitor watt power meters (2 options) ebay.us/lIoioF OR 200A amzn.to/3xBHKE0
3 phase Drop Wire "turbine down to rectifier" (2) 10/3 awg amzn.to/2FhbHy7 or 8/3 awg amzn.to/2XYUDEp Miscellaneous terminals to get for batteries amzn.to/2O9H0xy THERMAL FAN SWITCH 40C amzn.to/2C60UqV 3 pole double brake Switch amzn.to/2FrFOB5
*Diversion load resistors
12 volt 100 watt 2 to 6 ohm amzn.to/2ODJtTe
24 volt 100 watt 4 to 8 ohm amzn.to/2ovTkQo
48 volt 100 watt 6 to 12 ohm amzn.to/2ODr1tX
Wind and Sun Control OPC Module amzn.to/3zpO5E7
COMPLETE ALL IN ONE CONTROLLER FOR THIS TURBINE - (pick the Wind1500+Solar1500 12/24volt to get proper 750wind@12volt) s.click.aliexpress.com/e/_AsIplb
⬇️ Add the complete L.G. BRANDON SURVIVAL OFF GRID SOLAR POWER SYSTEM -- 100 Watt Panels (12) ebay.us/Zla5aq , Affordable durable solar controllers pick (2)60A ebay.us/pODwA7 ,Solar Connects amzn.to/2XJOa1M ,Battery cable USA made amzn.to/3h6dsim ,12/2 Above/Underground amzn.to/2XIJolg for safe DC wiring of lights and appliances.
Cheap Inverter with proven 5+ year record of quality - 3000 watt ebay.us/YEaTX9 for tool, high amp, fine electronics, uses Fairchild Semiconductors
My full personal OFF GRID PARTS LIST, a.co/dnSm8JX
🔥THERMAL IMAGINING Seek Camera for Phones amzn.to/3LSu63p Keeps you alert to intruders and Grubberment thugs hiding in the weeds.
SUNGOLD POWER Inverters a.co/dnSm8JX full list, SunGold Inc direct $50 off bit.ly/3ETweGr or Walmart option bit.ly/3v2Z57N they are REAL HEAVY & BIG, so you can have shipped to store to pick them up easier also get real warranty on them at WalMart.
REAL SOLAR BATTERIES - Get the DEKA SOLAR or Duracell B-903-L16 (freakin Monsters!!) that actually last a real 10 years. Made by East Penn, sold by Batteries+ as a Duracell for less. bit.ly/2wv1VXd Order online, for cheaper.
**Things used in other videos, amzn.to/2EaPFwx
**Highest quality 100 watt solar panels 5 bus bar 100W solar panels bit.ly/3hMWDZ0 or ebay.us/Zla5aq
On some Amazon Associate links I earn up to a percent point from qualifying purchases
⚡Green Energy DIY 800 watt REAL POWER Wind Generator s.click.aliexpress.com/e/_AeJFRx
***LOW WIND 600watt Turbine is s.click.aliexpress.com/e/_99l1XF , It makes wind power for almost everyone. Full wind power store options s.click.aliexpress.com/e/_AFDRgV
INE - Worlds Best Mig Welding Wire amzn.to/2DnaG51
Bernzomatic 8000 SUPER Torch amzn.to/2FvukN5
Option 3 for more 400W 550W 650W 800W 1000W Wind Turbine Generator 12-24V 3-6 Blades+Controller s.click.aliexpress.com/e/NNZ3Nj6
Wuxi Nai Er Wind Power Technology Development
SMALL WIND TURBINE VIDEOS • Chinese wind turbine t...
and see how we run them • Wind Turbine Brake & S...
*Joxн Даниел 2019 Production Idaho USA
*I.A.W. - PrepperMountain USA ForcePowerInstalls
**Perfect RV or Motorhome Turbine, does good with solar, the GE-300 - s.click.aliexpress.com/e/bNi4Kctw Get the 12 volt in good wind area, the 24 volt in low wind area. The best is 300 watt model, its all you'll need for 5 to 20+ amps of night and storm day charging. (Using 24 volt turbines on a 12 volt system is safe, proper, and what you use in low wind areas, it works just fine where a 12 volt will not go fast enough to charge batteries)
500W 3 BLADES HYBRID WIND TURBINE GENERATOR HYBRID CHARGER CONTROLLER HOME POWER
*RELATED VIDEOS
Blade Balancing - • Micro Wind Turbine Bla...
Blade Options - • Wind Turbine Generator...
Voltage Choices & Solar - • Solar Wind Hydro 12 VD... & • Solar Power NOW - for ...
Braking and controller videos - • Wind Turbine Brake & S...
Sad truth about wind power - bit.ly/3klcgIN
#PokyBuildsIt #MyBatteriesPlus #SunGoldPowerInverter 
Хобби
FULL LIST OF TURBINE LINKS BELOW VIDEO - Model 800w 12/24 & 48v s.click.aliexpress.com/e/5dnnyP8k Top performing 400/500 watt 12/24/48v ,The monster 1000 watt 24/48 And compact 200 to 400w too. Parts mentioned:150 Amp Rectifier (600 to 1400 watt) ebay.to/2nxu5g6 , 100 Amp Rectifier (200 to 700 watt) ebay.to/326b1F1
Mounting Flanges (check your MM size, I put link above) + Digital Diversion Load Controller ebay.to/30ZmIfe *Diversion resistors ( see defined use below - your voltage preferred options)
12 volt 100 watt 2 to 6 ohm amzn.to/2ODJtTe
24 volt 100 watt 4 to 8 ohm amzn.to/2ovTkQo
48 volt 100 watt 6 to 12 ohm amzn.to/2ODr1tX
LIVE WATT METERS amzn.to/2ODYJQk
SOOW 8/3 Wire ( safest to use ) ebay.to/2IFVnZb
*UPDATED SOURCING* - To get 100% full batteries from one & to divert over volt you need these: amzn.to/37HN2OR 100A SQL Rectifiers & amzn.to/2MTUjCU A All purpose long life Load controller and be sure to get up to and over 300 watts diversion resistors ( amzn.to/2QngFPq x 3 or 4) and one or more 60 amp SSR ( amzn.to/2QKEyj0 ) with heat sink ( amzn.to/2ZYtmna ) and be sure to use thermal past on it. ( Proper type - amzn.to/2QN2hir from Protronix) Consider your wind speed area to size it!
Hello John, I love your videos.
I have a question for a 800W or 1000W wind Turbine how long the pipe needs to be from the ground to the top, also can I use a aluminum light pole?
@@wagner1968 15 feet and higher depending on your install area. Ground disturbance clears up at 8 to 10 feet and is gone at 20 feet in 90% of the world so I would exceed 15 feet with no obstructions like trees or buildings within 75+ feet away when installing yours. And a (19+ foot on average) commercial light pole is a great type of pole to use.
Great video, I can't wait to see more about this!
Can I get and run a 24V windtur into a 12v system... do I need to convert it into 12v after it's generated?
Јоhn Daniel I thought you had to go from the rectifier to the charge controller to the battery? Or does it depend on what controller you have?
@@80Matthias80 Depends on the controller, if you have a braking controller which is sent with the turbine the system works but not well. On mine I run from turbine to rectifier to battery, then my OPC controller controls top charge rates with diversion loading. Its a much better design than the all in one controllers because you can get 100% battery charging, the others will only get it to 90% due to their design which applies braking to the turbine to prevent over charge. In my experience, braking is not good on turbines, loading them down is.
Another straight forward video I'm watching in 2023!
The best video I have seen from you. No negative stuff and the whiteboard diagram was very helpful.
You are providing a great service. I hope to have a place where I can get one of these one day and your videos shall be my teacher. Looking forward to the rest of them.
watching your other videos I was thinking the load controler and resistors were in series now I understand it better👍 thanks for the white board schematic🤘
Look's like a great wind turbine, can't wait to see the install and performance.
They started to use my 12 magnet design, S formed oval. and the output is good. Sad poor Bob ignored the info! China didn't. And its 25% more output with less heat.
I envy your family structure of all work, build and learn. It should be a requirement to parent now days.
just wanted to say yall are awesome. I wish the rest of RUclips had your standards and beliefs on the info or their lack of they share.
Hey Thanks as always for your great information that you have along with your experience that you give to us !
I like the white board idea. Have fun with your new turbine.
i finally got my 3000w turbine from this company. i am very impressed with the quality, much better than other turbines i have dealt with. it is a beast. going to get it up over the 4th.
How much you got iy
Tony, did you install your turbine? How is the performance? What elevation did you install at?
That is a great sit up. I wish that I could have one like that.
just found your channel. thanks for all you do. looking forward to learning about wind turbines.
Thanks John, This was very helpful.
Perfect 👌. Thank you for the lesson and upload.
Great video.Thanks!
Hi john, another great turbine video. You’re videos got me into wind turbines, thank you. I’m in Australia and I have two of the 500w 12v Chinese turbines like yours and the 2018 24v model before the one you’re showing in this video. Mine comfortably makes upto 1400w in 75 km/h winds. Don’t be amazed if you see some pretty big numbers. Keep up the great videos and thanks from down under.
Hi Marshall, I'm in Aussie also, how do we get in touch. Would be good to get a Australian forum going so we can bounce ideas and solutions back and forward. Check out my RUclips channel Simon Rayward and get in touch. Cheers
Salve, le scrivo dall'italia, sto per iniziare lo stesso progetto, mi può dire gentilmente quale regolatore di carica ha utilizzato, se mi manda un link dove ha comprato la componentistica per poter fare funzionare al meglio questo generatore per caricare le batterie. Grazie.
Hi, I am writing from Italy, I am about to start the same project, you can kindly tell me which charge regulator you have used, if you send me a link where you bought the components in order to make this generator work better to charge the batteries. Thank you.
It would be great if when you buy one it came with everything you need except the battery and the mounting pole. Great video!
They would most likely use the cheapest possible components that would either have features you don’t need, or not have features you need. Better to purchase exactly what you need for your system at the quality level you can live with. Did you end up installing a turbine?
Nice .very bad ass wind turbine John. I just finished my huge setup finally. I should add a huge turbine that's like 48v and use mppt controller like midnight solar classic 250
I was glad to see you show how low the output is on lower winds (10% of rated output at 9(?)mph). Do not get me wrong, I think wind turbines are great, IF you have the wind to support them. Most of the continental US just does not have enough wind for small turbines. I regularly run through the numbers to prove that for a most areas you are better off putting the money into solar panels. If you have 15Mph+ winds for eight hours a day you are right on the edge of being cost effective. Anything less, go with solar.
John Daniel you make the best videos . Where the hell have you been ? I haven't seen anything from you in months . You make all this electrical easy for a carpenter . You don't B/S and you don't take no S. either. I have been subscribed and bell clicked for about a year . I guess this damn you tube is messing with your channel like so many others I'm subscribed to . Anyway glad to see you again thanks for being old school and honest because I have seen well over 100 wind power videos and the majority of them are either liars trying to make a sell or just ignorant and learning giving bad info . Did you get finished with your RV project? Thanks again
That is the best turbine review I’ve ever seen.
Great...... very helpful
Thanks
LOOKS VERY COMPLICATED
If you think this is hard, then try getting up on the ladder.
Shout out from Europe here, your the go to channel to learn about wind turbines for sure, thanks for the great information, you really are educating people and your videos get straight to the point, its a real pleasure to watch you in action, thanks very much from over the pond!
Friend - Your getting harassed by a promoter or pal of Vietnamese made turbines sold as 100% made in America. Keep trucking, become independent of Big Utility.
Still a very competitive price. As always, great video.
Very nice 👍👍👍
Pam, Marsing, Idaho. Thank you for test, review and great demo.
Have you tested any of the Missouri Wind and Solar products?
With the world going nuts you better at least have a method of preserving food and making a little energy when you can. Won't be long now they will be rolling us over to socialism which means what ever you got - HIDE IT.
@@JOHNDANIEL1 Thank you, John. I'm on top of that, bc I'm old fashioned, but also the huge sharing type like my mom raised me, gotta can enough fruit to give away lots of pies :) I really appreciate men like you sharing so much knowledge. Sharing is caring and knowledge is the best. I like renewable energy, bc its a lot of fun.
Grate video John as always very informative I have been watching all your videos about wind turbines to figure out how to install mine I just got a 400 wat that I want to add to my 200 wat solar set up but I need to know what parts do I need to achieve that hopping you can help me thanks
Tx.gracias
Nice video ...
The drawing is great, now I have a idea how to put it together, thanks.
Except both wires go from rectifier directly to battery. That would overcharge battery because the charge controller is further down the line. I know it's just a quick, rough drawing, but charge controller is first before the battery. The charge controller is what switches off charge to the battery and sends it to the load. (resistors)
@@Tex_Prepper Incorrect. Your confusing active load management with the battery destroying dead locking fake 440 amp mega solenoid misssouri design stolen from micro hydro controllers first stolen by then from Coleman. Mine is not even related to such a abomination.
Јоhn Daniel
I'm not talking about any of those designs. Just talking about your diagram. So, according to your diagram, you can go to your battery from rectifier then on to the charge controller? So, your battery can automatically pass the charge on down the chain when its full?
@@Tex_Prepper The controller is a active controller, it not a bypass. So you get the ability to control voltage at the level you want by diversion only instead of bypassing it into a resistor bank. This process keeps your full charging rate you choose. The bypass design, AKA Missouri /Coleman thing dumps your entire system till the battery is almost dead then releases. (I'll use a 12 volt system as example) So if your wanting your solar at proper rates you set its controller to max charge of 14.0, then your turbines do the bulk & balancing charging by setting them at 14.65 vdc. Your solar will not be affected, only your wind turbines will. Each time your turbine hits 14.65 levels into the battery your at full charge and the OPC controller starts to pulse the SSR's to resistors, at first its 3 times a second, and as voltage goes up every 0.05 volts it doubles its SSR rate of contact pulses. Based on the diversion resistor load you designed for your unit it can maintain max charge at all times with that process. The hacked Missouri design dead locks a massive resistor load, drags your whole battery bank down to 12 volts and your solar controllers freak out, Your solar panels get the AMP shit knocked out of them, the controllers and inverters go into temp default and your likely to shorten your battery life by 50%.
Now you see why I have such disdain for such junk!
@@Tex_Prepper PS - A very accurate design using the OPC and SSR's will be drawn up with high detail soon, I just ran out of board space to be in depth.
How well do you think this would hold up in -50c? Wondering if the bearings could take that kind of cold. I live up in the prairies here in Manitoba and we get a lot of 30-90kmh wind here.
Question is there away to get the a/c from the wind turbine as you would an electrical box illuminating the battery
I'm building one myself including the alternator. It's fun to do this yourself, by recycling scrap materials you help the environment and a DIY alternator and windturbine saves a lot of money. It;s nice to see what I also need to make my turbines operational such as the powercontrol and inverter.
But why would you convert your DC back to AC again while moste devices run on DC?
Also is'nt there more energy getting lost if you convert it back to AC since a rectifier also already takes some energy away but this i needed.
Most things plug into a wall socket, not DC.
Europe is DC while The United States runs AC, hence your 220 we are 110.
@@fukyoindigoblossoming5087 europe is 220v but not dc
Hey, love the videos. Lots of good information! was wondering if you could do a video showing how to install a wind turbine from start to finish. I'm getting ready to move from Ohio to Maine and am wanting to go off grid. (I'm thinking that Im going to want at least 3 of these 800w turbines)
We have been dealing with so much like massive income cut, national insanity, and physical limits lately but are on track to install more soon.
Hi John,
Absolutely love your videos and your no nonsense approach to giving us great info with no BULLSHIT!
Going to get one of these Chinese turbines as you're the only person out there really that tells us they way it is!
Any way, I'm over here in the UK and am going to install a wind turbine as we are in Scotland on the side of a hill, it's always windy.
So we here in the UK don't usually have power outages and I am connected to the grid.
With the world going to shit lately our energy prices are about to rocket, I am looking to connect my Turbine to the grid to reduce my bills, with a battery back up system later on (there are rumours of power cuts this winter) I was wondering if you have had any experience with these Chinese Grid-tie-inverters for wind, do they do what they are supposed to?
Any ways thanks for all the info. and keep up the good work, LOVE IT!!
Ste
Thanks for the info on this turbine. I have had my turbine running since 2008, and some of that time was teaching and trade shows. This year I was pulling the unit for maintenance and broke one blade. I would like to replace the blades not the entire unit, so if anyone can help me get 3 blades for my 450 watt unit I would appreciate it.
Hi John my name is Joe and i am in the south of the UK. Firstly, thanks for the many tutorials you have posted they ultimately inspired me to put in a wind turbine ( a chinese wonder i may say) but on the cheaper side as i wanted to try things out first. I do however have an issue that any thoughts you may have would be greatly appreciated. My turbine keeps turning it tail to the wind and running backwards. It could only happen to me lol. Again thanks for the Vids they have proved invaluable and as i move forward look forward to learning more about the finer details and upgrading. Stay safe.
Sounds like your pole is not plumb. However you can add 4 to 5 cm of sheet metal to the tail if your air is so turbulent it causes so much spin out.
How is it holding up? Thank you and get well soon!
Hey John,ever try a vert axis machine?
That tape looks rare without dual metric. Best wishes from Northern Ireland. 🤣
It's a Malaysian made $3 tape from harbor freight, strangely more durable than the $30 Stanley tapes I have tossed after a few months.
looks like my I found my next turbine, assuming one of my others die some day, looking forward to seeing those amps hammering in the next video👍
ive dealt with B+C top company for after sales too 👍
Yes, they are quick to send out anything like bolts or even internal parts if you need them. I got one install in south Utah that had 5 - 1000 watt turbines, and they had it delivered before I got there to install straight from china, and that made the people happy.
@@JOHNDANIEL1 yup three days to ireland, they'll mark customs stuff low as well if you ask .
Yeah, sad to say they don't know how to VAT accurately LOL!
Great video i like the way you explain things 👏🏻... do you have a video I can watch to learn how to combine both solar power and wind turbine.
I will add one soon
Thanks a lot I’ll waiting for it. 👍🏻
john, i have the 500 watt model as shown in your previous video, can i simply insert 2 wires into the MPPT40Amp where the PV wires would go? Will this work? Will my battery still get charged? thank you for you reply.
I'm sorry Sir but I fail to see the link referring to the wind turbine so I can purchase that exact model. Great info your video and I look for ward to duplicating this exact system ty
Kitni achi tarah se samjhate ha aap plees hindi me dabid my hindi plees ser
John. I need some help if you please. I appreciate the videos you’re posting. I just purchased the Automaxx Windmill 1500W 24V 60A Wind Turbine Generator kit. However I can’t find a diagram online that tells me how to properly set up the electrical connections. You’re videos are the best I’ve seen to explain the process but they go into far more depth and design than anything else I’ve seen out there. I was wondering if you’d help me sketch out the diagram and supplies I need to purchase to put a system like yours in place.
Hi John, the load controllers listed are all for 12/24V. I have a 48V system and the 800W turbine you recommended. Which load controller would you recommend for my 48V system?
That is nice!can I connect wind turbine in series?If the answer is "yes" So,If you have 4 piece of that wind turbine, It's mean you have 3.2kw in series,enough for domestic installation. Big up to you.
Hi John,
Yet another wonderful video, thank you.
The wiring diagram is very insightful too.
Has B&C listed any of these turbines on ebay.co.uk?
No but if you need that method to get one you can contact them on Ali Express and request they make a listing for you.
Have you thought of reviewing a PMG from Missouri Wind and solar? Would be nice to know if there a good product
If they've changed what they build I might consider that.
Morning John frothe UK, our energy prices have been hiked up again so I've got to do something more to reduce my bills!! I have a small solar system, but being in Scotland sun isn't around much! Having been a huge fan of you guys for a few years was going to buy the 800w 12volt turbine you have recommended in this video. I'm thinking of using the mars rock 1500/1500 wind & solar controller that you've suggested... just for set up simplicity, because electrical circuits isn't a strong point of mine.... If you have any other suggestions on a set up with my battery bank that would be much appreciated, or if you think I should use different controller I'd appreciate your help... Thanks Ste
Please do a sound study. I'd be curious to see how mich noise it makes and at what speeds.
Also, is this setup going to be able to be used on a sailboat and resist the elements?
We did, and at 20 feet using a meter ( amzn.to/34sLKpk ) about a week ago, its info you need to do installs so I do record it when possible. 56.3 in 15 mph winds, seemed you only hear it good if your within 40 feet. You will hear it in 20 mph winds a bit louder but the wind itself is just as loud at that point. The 5 blade with sword style blades are a WHOLE different story, 69.5 db at 16 mph so I recommend the low wind version that uses blades like this 800 on it to make it quieter.
How can I purchase a complete 2000 w system ready to install wind and solar hybrid mentioned above
The three wires on my 2020 bc 24 volt are only 16 gage should I be concerned? It not in stalled yet.
Hi, Which tail design is better for a small turbine. Tail up or tail down?
Have you had a shot at getting one of these to work with MPPT? Surely you'll get a much better result if you can take any input voltage and squeeze out more wattage at the right voltage. (PWM just pulses the input voltage to try approximate the charge voltage but due to pulsing, you lose a fair bit of power).
They do sell a MPPT controller for them that cost $320 but then thats the price of another 500 watt 5 blade unit! Better to put up 4 turbines that are slightly inefficient than 2 with MPPT in my area. But if you do have low winds, a MPPT is a best option.
While we have already 3phase coming from turbine.What about a step up transformer to 230 v for south africa ?
And i want to use 3geyser elents as dumb load.Can it be done?Windy cape town
Definition of open voltage and the importance of it? Any recommendations for a RV setup and can you discuss how much the noise levels are on wind turbines? Noise is one of the biggest complaints.
The blades like on this 800 are extremely quiet, 55 db. But the blades on the 500 are much louder, like a 3500 watt generator at 50 feet away. You can get them all with that much quieter blade, just when you follow the link look over to the right side and theres many to use from them just stick with GE or B&C because they are the only 2 assemblers/sellers that actually order the right parts for these that I have found in 5 years.
hi good morning , i have a question , can we connect directly from wind turbine to converter without using battery or the battery is essential
Great Video John!! Very helpful. How exactly might you adjust this setup given the AliExpress MPPT you list on your links section? Where would the MPPT tie in? Thanks in advance!
Wind turbine to MPPT, MPPT output to battery. It converts the 3 phase from the turbine into DC voltage and uses a system to enhance charging results plus a diversion system to prevent over charge i high winds.
@@JOHNDANIEL1 Ok, got it. Thank you for your speedy reply. So, safe to assume this MPPT would remove the SQL 1000Amp rectifier from the configuration. Does this also remove the SSD relay as well? Or no? Again, thank you for all the info! You break it down nicely. Cheers
Would you help me?
I have a KT7 from thermodyne
It's 48v ac 1500w wind turbine.
It's going through a rectifier.
Im wanting to grid tie this system and looking for a good charge controller to charge batteries before going to a grid tie inverter.
What would you recommend for a charge controller?
I love your wind turbine videos. Question for you... Could you do a grid tie inverter with this? Have u seen the Chinese blue one that has the rectifier, controller and dump load in one? I just wonder what would happen when you're not home to monitor it and the winds pick up?
A quality grid tied inverter designed for wind will have diversion loading, settings, and materials also designed into the build. So home or gone it will work fine.
Dan look at the 2000w model of the blue Chinese sun inverter. (sun WAL-GT 2000) You will need to oversize the inverter to handle high wind output. it's what I'm using. It has never gone into load dump. Or you can series link 2 x 1000w models.
I think I would go for the slightly smaller version of this, say, the 500w. But I have noticed that B & C do a 400w vertical wind turbine and wondered if perhaps you have taken a look and these. I would certainly value any guidance you can give me as I have heard that vertical turbine technology has a way to go and that they sometimes don't live up to their promises.
I can check with Nina about them. Send me the item info.
John can I but one from you with all kit for a DIY install❓ I have little electrical knowledge, and based in New Zealand. Cheers.
They have all the parts you need from B&C, including controllers that do MPPT and internal diversion ( which you would need in NZ) On that link below the video to the 800, go to it, then look on the side of the page, a big 1000 watt controller for 24 to 48 volt is available, you just wire down to it, from it to the batteries or you can also get a grid tie from them with same options and ease of install.
Thanx for the clear and extensive video, man. Very interesting. I also saw your 500W wind generator video. I subscribed for more :-) One thing I'm wondering about, though, and that's why you don't put a regulator in between the rectifier and the battery. Our boat doesn't have a wind generator anymore (I think the previous owner got sick of it), but the solar/wind generator regulator is still there, and it's in between the wind generator and the battery bank. Is there a specific reason you do it different?
Happy greetingz, Wim
Oh, haha, I think you answered that question at the end :D Because you have several wind generators on the same system, right?
4 U To get 100% full batteries from one & to divert over volt you need these: amzn.to/37HN2OR 100A SQL Rectifiers & amzn.to/2MTUjCU A All purpose long life Load controller and be sure to get up to and over 300 watts diversion resistors (
amzn.to/2QngFPq x 3) and one or more 60 amp SSR ( amzn.to/2QKEyj0 ) with heat sink ( amzn.to/2ZYtmna ) and be sure to use thermal past on it. ( Proper type - amzn.to/2QN2hir from Protronix)
Hey awesome video so hey question for you as I'm trying to understand
So i have a zendure super base v 4600 unit
Do i need all them dodads or can i just get away with just the turbine and hook a 10 gadge to it and a xt80 connector and good ta go?
Turbines put out raw voltage, many power stations will reject or fail their BMS and charge controller. Using a Slave Battery in the middle will work though to send them power easily. I plan another video soon on that subject.
John,
What type of charge controller are you going to use if you use a rectifier. Will it be designed specifically for wind, or can it be a controller that can be used for both solar and wind, and is so what about the SSR and dump load.
Thanks.
Wind and Sun OPC diversion system, links for the parts are a ways down in the info below the videos
Dear John!
GE or BC which one is the best?
John,
Great video, though in major cities they do not allow this kind of wind turbine (safely of blades going flying) but vertical turbines are usually able to get approvals and are not a problem. Is there a vertical wind turbine that you think can work well and generate 800 - 1000W using a 12V system?
This 800 watt is very solid, and extremely quiet. A vertical turbine is much louder than this one, and would be a seriously big waste of money due to cost per REAL watt output for them.
John,
I was told at one point a few years ago (I am not familiar with the current legislative environment) that having a blade wind turbine in Las Vegas is illegal, but vertical turbines are not (it is a safety issue as far as I understand it). So, if you think a wind turbine that is vertical will give me no useful return then its best for me to eschew the entire idea of setting anything like that up. Solar here is way to expensive when you include the installation cost and the power company's having gotten the government to skew things (like selling power back to them) to make it a poor return on the investment.
Hi John, I am in Tanzania and I liked your video. Great stuff! I am a farmer and wonder if it is possible to use turbine to generate power that will run a 2horse power pump for avocado irrigation. Thanks
Yes, a wind turbine can produce usable power to do that depending on how you store the power and use it.
@@JOHNDANIEL1 Thanks
Јоhn Daniel
i have a question, those 3 wires when the turbine moves with the wind does the wires get twisted up
Thanks for this video. I have a question about the diagram at 0:08. Can I replace the load controller with a solar charge controller to protect the batteries?
You can use a Xantrex ebay.to/3i8nIX5 and just follow the instructions for it on how to run a turbine through it.
Can this be used to charge a Bluetti 2400 which requires 16v - 67v range and no more than 500 watts. Guess not.
Why is there no regulator to provide correct voltage to the batteries based on type of battery?
Lithium and LA for example need different charging profile.
"Junk from the Midwest" that was good and funny
If the generator is that hard to turn under load, how does a small set of blades turn it so fast? I would think that it would stop the blades.
I finally got my Chinese turbine up that you recommended. I have 9mph wind right now and it's not spinning at all.Brake is off.What mph wind does it need?
It will need some good 20+ mph gust to set the magnets and field in it. Then you'll see base watt power from 10 to 11 mph, very little, then progressive sharp increases as it gets past 12 mph to peak power ar 25 mph.
@@JOHNDANIEL1 Thank you.
why u will use the rectifier and not the controller u got from the wind turbine ??
Hello, I show on your videos turbines from B & C wind generator company and Green E Solution. I looking to purchase 500 Watt model.
Which brand do you recommend? Or they the same? And what design blades to choose? (if there are a choice)
Thank you
How about something like a grid tie inverter as a dump load i just hate wasting energy and I'm in texas so trying to use the heat is unlikely i guess you could do a water heater or something
As often as they may go into and out of divert modes that option is not very usable. People do it, but never recover a cent invested. However, in Texas your best bet is have it cycle on a attic exhaust fan system using a 80 to 120 watt 12 to 16" fan. It can handle the cycling on and off, and will remove that heat! ebay.to/2pnwB9x
* Data from nearest weather station: Claremorris (Mayo), Ireland (49.4 KM)
If you ever needed a wind turbine now is the time with the ESB charging 0.20cent per KW
I habe a question. How can i build wind turbine to place it on roof of car and charge elektric car. For example one faze Ford Kuga plug-in hybrid. What kind ofturbine, possible vire configuration, spare parts etc. Is it possible at all?
Solar wind or controller model will I need if I'm adding it in combination to my solar panels?
If you are running a small to mid grade system, get the all in one Wind1500+Solar1500 12/24volt to get proper 750wind@12/24volt) s.click.aliexpress.com/e/_AsIplb . You would add no more than 800 solar and a 800 watt turbine like this one s.click.aliexpress.com/e/5dnnyP8k and you won't need to controller that comes with them. Just order WITHOUT CONTROLLER and get that one above.
Anything like a inverter or controller normally rated for any amount you should never take to the limit. So a 1500/1500 watt is best left running at 50 to 60% max for longest and safest lifespan.
I have a crazy question. Is there a way of adapting one of these turbines to work on a moving vehicle to take advantage of the wind as you drive from point A to B?
You cannot create, nor destroy energy. Dumb idea.
John Zhangting, I love your videos, so much great info! I just got my 800W Turbine from China, It is an awesome unit, I got the 24V unit and I notice that the controller is smaller and the wires coming out of the flange are only 16 gauge? Is this correct? Everything else about the Turbine looks like yours and it weighs 35 pounds. I'm a bit disappointed with the very small wires and I understand that 24V can be smaller wire but 16 gauge? What do you recommend? Thanks sir
The length of the wire is not likely to cause you a issue as long as you go from drop to jump to 12 awg up to 22 feet or 10 AWG up to 68 feet from it to the battery area, I would expect them to have a China Gauge with thin high temp sheath that looks like 16 awg but is more like 14.7 awg actual due to Metric measure. It should be good for 45 amps @ 29 volts (1300 watt peaks) meaning each wire ( using the 3 phase 2.62 amperage loading math) capable of continuous 18.5 amps, peaks of 22 amps.
You tube deleted your comment for some reason but I saw it first. So your 24 volt may hit half the amps at 2x the voltage is the exact math. Possible 45 amps for sure but its short burst, and not past the wiring capacity. If you see a storm on the horizon that will be dangerous you engage the brakes as you should to keep it under 50 amps @24 volt so your OK. It can do that, I assure you!
Hi im enteristed that itimes
Links below the video in description
I just received my 500w wind turbine from b creation (b n c) and the shaft seems to have play I can push in like almost a quarter inch in? Is that normal seems Abita stiff too doesn't spin by hand easily. The packaging was beat up damn ups guys!
It should have about 3/8" play in it, that's centering travel. And it should require 7 to 8 lbs turning force so yours sounds very normal.
@Јоhn Daniel yes thanks I tested it with a drill on low speed and I got like 56 volts.
I have a goal zero 1500 yeti portable solar power unit. I have 400 watts feeding it from solar panels , Can you tell us what wind turbine is needed to feed the yeti and what is needed? thanks tee
Goal Zero power stations are not designed for or capable of handling wind turbines. But if you add a decent sized second battery to them you can likely use a turbine.
hi John - Question: 800W turbine (24V) - with the controller supplied - in a victron 150/70, parallel to solar modules- they are already there. is that an option? is a return flow from the modules be expected?
The Solar controllers Blocking diodes and relays won't allow back flow from other incoming power. But I recommend always buying wind and solar controllers you can set the parameters on.
Would that size of wind turbine be overkill for most small PV systems? Some of your previous videos have had smaller turbines with great output results. I'm just trying to imagine myself attempting to install one of these units. Pretty big.
If your running a 3000 watt inverter and 8 or so deep cycles your at the low end of needing a 800. More fit for a 500.
John - What size pre-made flange should be ordered for the 800 watt turbine? Is size "M" OK? de KP2CY
Scroll down on the links I put on there, once on Ali just look for the measurements and model on the flanges. it will be about 5-3/4" OD with a size rating 800 to 1500 turbines. 140 to 150 mm
If I’m in need of one turbine, what type of battery do I need to run in my house
I’m wanting the 6 blade 500w model.
when you go to the link look off to your right you will see the six blade 500 watt model but I suggest only going with the five blade low wind model the six blade is no better.
Can power from the OCP be diverted to another battery bank instead of the resistor load?
Yes. As long as you can use the power in a second bank so it don't end up being over charged from wind power. The easiest way to use 2 differing aged or style battery systems New with Older, is a isolator ( my video on it ruclips.net/video/4jqjsZHmEEU/видео.html ) and use the diversion control on the main newer bank of batteries.
John, I’m just starting to plan my own power system. From what I’ve seen, 48v is the preferred battery bank voltage. Is that true? If so, would you need a 48v capable turbine? Also, I plan on assembling my own LiFePO battery bank... seems to be the best option considering longevity, stability, and power density. Can you confirm? EDIT: Nevermind, just watched your “Why do I run 12v” video. I want to replace grid power in my home. Mainly lights, fridge, washer/dryer, hvac (we have 2 4ton systems), etc. I just saw your 5000w inverter... if I want to run my house 100% in case the grid goes down, am I going to need one monster inverter? I have room for as many panels as I need. You’ve convinced me to run 12v with lead acid. I plan to run solar and wind (using the hurricane turbine you reviewed - your discount code doesn’t work anymore). Is this even possible, or do I need to setup a smaller system and just choose what to run?
I prefer 12 volt, its not about efficiency of a volt or watt, its about total survivability of a system, actual total cost is lower and availability of parts as the world descends into chaos. You sound like your a Back woods hick when you say GO 12 VOLT, according to the sellers of 24 and 48, but isn't that what they would say. See my explanation video then you decide. ruclips.net/video/1SNqV7nMDHU/видео.html
Just watched your “Why do I run 12v” video. I want to replace grid power in my home. Mainly lights, fridge, washer/dryer, hvac (we have 2 4ton systems), etc. I just saw your 5000w inverter... if I want to run my house 100% (220 and 110v) in case the grid goes down, am I going to need one monster inverter? I have 200a breaker panels in both my house and shop. I have room for as many solar panels as I need. You’ve convinced me to run 12v with lead acid. I plan to run solar and wind (using the hurricane turbine you reviewed - your discount code doesn’t work anymore). Is this even possible, or do I need to setup a smaller system and just choose what to run?
Hi, great video, but unfortunately I don't understand English (I'm Italian), I understood the concept, I would kindly like you to tell me what those two tools are and what they are used for in a plastic box one attached to an aluminum rod , and if you can send me the link to the charge controller and all the rest. Thank you
That was better English than 90% of RUclips. Prego!
Is there any merit in putting an MPPT load on a wind turbine like this, given the wide range of potential output voltage ?
Yes, and they make a MPPT thats got numerous chokes, massive Mosfets and transformers just for these sized turbines. You just have to be careful your not getting a Vietnam knock off MPPT so study and investigate a lot before getting one.