Dustin the levell of the harness i very dangerous for you, the holes in the seat need to be AT level with your shoulders or a bit higher, if u get into a crash like that the harness will compress you down, and compress your spine, its supossed to pull you back , not compress down, PLS for your safety investigate a bit more on them , i might be wrong, but i dont think i am, i want you to be safe man!!!! The problem is the seats, theyr too short in height for you.
You're absolutely correct. I just commented the same thing. Bride seats are made for smaller Japanese people, needs to look at other brands like Sparco which are designed with much taller backs.
@@eski2002 it's not about submarining. Glad he actually went with a 6 point not a 4. Its the shoulder straps being at the incorrect level/angle and pulling down/compressing on your spine.
When he says he gotta cut the chassis "a little bit" to put the backing plate on, I knew this was gonna get interesting. Cutting the chassis to get the backing plates in and installing the roll bars was the hardest work I've ever done on my s2k ever. I have the same hard dog 4-point
can't believe how far you've come! from just the WRX to having so many dope cars, you are one of my biggest inspiration on everything from following my passion with cars and fitness
Ayyy Dut if you want the airbag light off you can get a 2.2 Ohm 1/2 watt or 1/4 watt resistor off ebay and connect it to the airbag seat connector or solder it to the connector harness. It'll fool the ecu making it think the seat is in the car.
@@MrUltimatePCgamer he's done the full package at once which is good, only thing I'd do is disconnect the driver airbag until he puts his steering wheel on. Just needs to change the seat for something with a taller back like Sparco and he's good to go
Hey Dustin, I just gotta let you know. I own an 03 AP1. Your soft top isn't going down all of the way. There should be a bungy strap connecting two of the bars on the soft top to pull one back and allow the top to fold correctly. You can get upgraded replacement straps from a website ( modifry.com ) also as a resource check out is ( www.s2ki.com/forums/s2000-under-hood-22/%2A-%2A-%2A-faq-s-diys-maintenance-%2A-%2A-%2A-548714/ ) PS: DO WHAT TJ COULDN'T!
S2000 don't need them as they don't have struts. It's a double wishbone suspension set up. Also if you look in the engine bay there's a big cross brace between the shock towers connecting each frame rail. All that's needed :)
DUSTIN SHOULD PIN THIS FOR THE BOYS
YTB!!
I'm not a boy.
1-10, how loud is the exhaust? It sounds great, but is it obnoxiously loud to the point my neighbors will hate me?
“Just got a new air freshener, I can’t wait to see how the car feels now, let’s go take a rip” love ya brother
Kyle Souvenir just got new stickers, I can’t wait to see how the car feels now, let’s go take a rip
Lmao literally though
Dustin-“this is going to save lots of weight!”
Also Dustin- in full Bulk mode 💪🏻😂
Dustin the levell of the harness i very dangerous for you, the holes in the seat need to be AT level with your shoulders or a bit higher, if u get into a crash like that the harness will compress you down, and compress your spine, its supossed to pull you back , not compress down, PLS for your safety investigate a bit more on them , i might be wrong, but i dont think i am, i want you to be safe man!!!! The problem is the seats, theyr too short in height for you.
You're absolutely correct. I just commented the same thing.
Bride seats are made for smaller Japanese people, needs to look at other brands like Sparco which are designed with much taller backs.
the harnesses have an anti-submarine feature
@@eski2002 it's not about submarining. Glad he actually went with a 6 point not a 4.
Its the shoulder straps being at the incorrect level/angle and pulling down/compressing on your spine.
Went with Bride’s why because JDM.
Yup Dustin should listen to this guy
Red Bride sets would've been so sexy inside the car.
DatDudeCMitche bro I read that as “real” I was like what dut don’t use rep parts
Yeah, red seats would've looked so much better
DatDudeCMitche Red Recaro is nice too :)
Red Recaro Pole Positions.......something I couldn't afford when I had my S2K
Red carbon fiber
If you have that genuine smile like Dustin @13:09, you know you bought the right car. The S2000 will always be an awesome car...
Can't wait to see you on the track with it. Enjoy your S2K!
nobody:
Dustin: THE BRID SEATS
but yo I had no idea thats how they were pronounced, always heard it was bride 😅
The hardtop is gonna look amazing with that bride seat.
Man I love how you’re getting these videos out ASAP, one right after another! Keep the the great work Dustin!
That red carpet and red door panel is fire! 🔥❤👌🏿
stopped everything I was doing to watch the next part of the build 💪
me too
When he says he gotta cut the chassis "a little bit" to put the backing plate on, I knew this was gonna get interesting.
Cutting the chassis to get the backing plates in and installing the roll bars was the hardest work I've ever done on my s2k ever. I have the same hard dog 4-point
Is that seat safe for you? Isn't the harness hole supposed to be above your shoulder so your spine does not get compressed in the case of an accident?
S2k is getting in shape dustin. Good job
honestly the best car channel on youtube best content and awesome edits
My man 🙏🏼
s2000 boys 🔥
can't believe how far you've come! from just the WRX to having so many dope cars, you are one of my biggest inspiration on everything from following my passion with cars and fitness
Love the new s2k build series😍
Ayyy Dut if you want the airbag light off you can get a 2.2 Ohm 1/2 watt or 1/4 watt resistor off ebay and connect it to the airbag seat connector or solder it to the connector harness. It'll fool the ecu making it think the seat is in the car.
Seeing your videos have inspired me to build my cars to elite levels. I love watching your videos. Keep em coming, this s2k series I see will be sick.
That s2k is coming to life!
Absolutely love the direction that you are building the s2000! Would love to build an s2000 for the track one day!
they all end up show or street cars..
Already one of my favorite build on your channel. I miss my s2000 😭
This track project is going to be crazy, the decision to go by spoon is the best! definitely the R35 and s2k my favorite projects !!!
That soft top has GOT. TO. GO.
Honda gang baby!!!
DUSTIN MUST HAVE A MILLION SUBS!!
The s2000 is becoming more amazing. I want one.
Ken has the nicest CSX's ever! Hope you get him to help you with this build more.!
Notification gang! So hype for this build. S2000 is one of my favorite cars, and I can't wait to see what you do with yours Dut.
The s2k melts with the roll bar 🥰
im still sooo happy with this car on the channel! i can just sit down and eat and learn for what i can do for my s2k haah
Dustin back at it again w the elite taste
The S2000 “secret compartment” haha
This car is for keeps, I want one 😍
You just did it Dustin......you pissed me off 😂😂😂😂 call it bride as a wedding bride
Stiven Fuentes ffs i knowww
The S2K videos! 🔥👍🏼
That pull at the end. Eargasm 🤤
Ohhhh yes! Nice!
Yo that evo in the back looked sick also
The ending of the video was on point I love it ❤️
That VTEC sound..👌🏼💪🏼
Ken has some badass cars and creative ideas. I’m thinking about grabbing me a seat too!! Soon
This car would be a good candidate for a dash display!
No mucking about. Straight into it.
Track build beggins🔥
Hell yeah!!! S2k build!! I want to see some spoon stuff added to this car!!!
So excited to see this build!!
This is one of my favorite car. I wish I had one to build. Cant wait to see what else you do to this car.
Ken is a master at creating aero and just building cool shit
This s2k gonna be so epic
Dope, loving this build !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
hey bro all your car is so hella clean, hope more vlogs, jdm number one!!
Yessssssiiiiir! 💯 love the video man! Detailed as always!!! 🙌🏻💙
FULL SEND!🔥
Dustin keep up the amazing hard work!! You deserve it!! 👍🏼🔥
looks good bro. same roll bar i got.
that vtec crossover! @13:09
Hey Dustin, how were you able to register the car? Since the dmv has been closed
LOVE FROM MALAYSIA 🇲🇾❤️❤️❤️
Later Ken ayy Malaysian gang 🙌🏻🇲🇾
Ahaha dri sabah
Tommy the 4th aik sama🤣
Wait so are the zeta or vios 3’s? I’m looking for some for my WRX! You said both in these video 🤣
Bro i think I’m more excited for you to see your car on the track.. well can’t wait for you next video and next mods.
Killing it
so what exactly type of seat and rollbar is this? looks good for mine too
You're too tall for that seat with the harnesses and they're at a dangerous angle.
Hope you don't crash otherwise laters to your back/spine.
Ya this setup doesn't seem very safe :(. Not a fan of running harnesses unless there is a complete setup. Best of luck to Dustin.
you'd think art of attack would know and try to correct it
@@MrUltimatePCgamer he's done the full package at once which is good, only thing I'd do is disconnect the driver airbag until he puts his steering wheel on. Just needs to change the seat for something with a taller back like Sparco and he's good to go
@@eski2002 ehhh, they got their money.
TRUE JDM LEGEND🔥
nice a new video for dustin, but i'm waiting again dustin 😁
I have to watch this before going to sleep. Love from Philippines
i like ken hes chill
Hey Dustin, I just gotta let you know. I own an 03 AP1. Your soft top isn't going down all of the way. There should be a bungy strap connecting two of the bars on the soft top to pull one back and allow the top to fold correctly. You can get upgraded replacement straps from a website ( modifry.com ) also as a resource check out is
( www.s2ki.com/forums/s2000-under-hood-22/%2A-%2A-%2A-faq-s-diys-maintenance-%2A-%2A-%2A-548714/ )
PS: DO WHAT TJ COULDN'T!
Love the S2K contents bro!
This setup is my dream
Don't forget to get Hondata KPRO so you can do all the engine tuning you could want on this thing.
Love it dude! You should get a strut bar/brace to stiffen up the chassis!
S2000 don't need them as they don't have struts. It's a double wishbone suspension set up. Also if you look in the engine bay there's a big cross brace between the shock towers connecting each frame rail. All that's needed :)
Todd Higgins thanks a lot for telling me bro!
Here we go boyy
Lol hearing him say “brid” drives me crazy.. I know it might be the correct way to say it but I hate it lol
wait is it really read that way? damn been reading it wrong
If we’re going to be technical about it its suppose to be called bullet lol
Keep it up with the good vids!
Hey distin please do a Drive by video of the s2k please 🤙🏻
okay Dustin looks huuuuuuuuuuuuge
Would you recommend a 2002 RSX?
Anthony Romano hell yea k20 you can do power
Looks awesome 👏 👍
They and find a Spoon Sport Coupe hardtop for it! Will completely change the look and go with the race car vibes
Need to track the Evo and the s2k.
From malaysia love your work
I miss rolling around in my homies s2k, it’s like a go kart, or like a miata, but good.
It sounds so good
Gonna be a monster of a car
Dude if you’re gunna track your s2k you should definitely put a supercharger 👌🏽
Are you going to get some red carpet in the back to cover the bare floor?? I think would look cool to have it matching the rest of the floor
What volk racing wheels are you putting Dut?? What specs and when?! I can’t wait for you to put coilovers and wheels on this thing!!!
You should make an S2000 playlist ;)
this s2k is just beatuful
I love this guy angel!
I have a suggestion. How about you put in the cost of the parts you bought and perhaps a link to where you got them from.
Did you stop in Rancho Cucamonga? Next time you out here come for a drive in a supercharged Dodge Viper 🤙🏽
This is gonna be a nice little track car
This is going to be my second car I just dont k now what year looks best
Lowkey a full red interior would be dope
@Dustin Williams Are you gonna get a pop off racing steering wheel?
This would’ve been done in a year for other owners but Dustin does it in a week.