Awesome video! Just wanted to add something: I really like compact ship and base builds, so while the basic refinery isn't power efficient, I'd never say its useless, since its way smaller, thus, lets you build small vessels while still having the capacity to refine some ores :).
when not using Isy i usally like 2-4 refiners. 1. Stone and scrap 2. low tiers metals 3. Hi tier 4. CO gets its own . Sorter in> cargo buffer > refinery > sorter Out Ingot> Cargo Buffer > Assembler..
On my large space station I’ve added a rout for stone to go through to a decent amount of basic refineries solely for stone And the last ones pretty cool and fun, it’s like a “focus mode”!!
I like your 4 refinery setup, only thing id change is to add like 4 basic refinerys down the open middle of them with sorters on both ends to force only stone through them. Tbh though I usually just use Isy's Inventory Manager script.
So I've actually run the four with isy's manager. It works fairly well, and since it balances and cycles through the ore, it makes this system way more efficient.
Ive discovered i like a dual refinery setup, with sorters in and out on both, one refinery has all speed modules and the sorters only allow fe si ni co and stone, the other has all yield and refines all the higher value ore, i usually just eat the power cost, i love those speed and yields too much
i still have very old save where i build my base into asteroid; i first had refinnery for every ore; all connected intput and output filters, all connected to main logistic system and storages. later i added had 8 refinneries for every ore; all controlled by similar filters. only issue was that ore was distributed very unevenly in expanded version., but everything was done. with that many refinneries i just went with yield modules, speed was just concern of adding more refinneries.
Buttons and Timers for Control: Button Restore Default: Resets the system by triggering the “Timer Block: Default.” Timer Block: Default - With a 60-minute delay, it reactivates the default sorter to allow all ores except the prioritized resource (e.g., iron) to flow, disabling the iron sorter. Button Iron: Initiates iron processing by triggering the "Timer Block: Iron." Timer Block: Iron - Activates the iron sorter, deactivates the default sorter, and starts a countdown to revert to the default configuration. Ore Intake and Sorting: Ore Intake: Ores enter via a connector and are directed to Ore Storage. Sorters: Sorter Default - Allows all ores except the prioritized resource to flow to the refineries when active. Sorter Iron - Whitelists only iron ore, allowing it to pass when activated. Sorter Ingots - Set to whitelist only ingots, ensuring refined materials are directed to Ingot Storage. Clean Out Function: Button Clean Out: Triggers the “Timer: Clean Out on,” initiating the clean-out process. Timer: Clean Out on - Activates the Sorter: Clean Out to remove all ores from Ore Storage, draining them when necessary. It also starts a secondary timer to turn off the clean-out process after 30 seconds. Timer Clean Out Off - After a 30-second delay, deactivates the clean-out sorter, returning the system to its normal sorting configuration. Sorter Clean Out - Configured to drain all ores when active, helping to empty ore storage during a clean-out. Ore Processing: Ore Storage directs ores to the Refineries based on the active sorter: Prioritized Resource (e.g., Iron) flows to the refineries when its sorter is active. Other ores flow through the refineries when the default sorter is active. Ingot Storage: Refined materials are stored in Ingot Storage after processing in the Refineries, with only ingots allowed to pass via the Sorter Ingots. This system’s modular design allows for adding similar sorters and timers for additional resources. Replace "Iron" with the desired material, and the system can process each type of ore independently. The "Clean Out" function is a flexible addition that can quickly clear out storage when needed. I hope this helps.
I like the more simple setup for finery you've got with the four refineries. The bigger ones it's like that would be a nice to have somewhere but it's almost too garish.
Yeah, that is my go, too set up. The switching one is novel, and it may work with ores that you need to prioritize (such as one for magnesium and uranium). You could add that into an existing system.
Hi, I am highly interested in your last method, I build VERY large motherships and I want to streamline the process (by choice) I don't do event controllers but if you can do one for a specific ore and one for cleaning it (next to the L cargo container) I can set up the rest. I could then make a video showing your set-up on my ship. Thanks.
@@oscargaming7582 sorters. I set my refineries up so a sorter pulls ore into the refineries, isolates the refineries so only certain ores go in each refinery, and then other sorters pull the ingots out to the assemblers. It takes a bit to set up but keeps you from having to manually shuffle if cobalt or something is blocking iron. It's also slightly more spacious, but I don't think that's a huge issue for most people.
Another thing that I have been having trouble with it the speed of the ore feeding into the refinery, with all speed modules, sometimes the intake of OREs is not fast enough. Is there a limit in wich the sorter can "push" ores into the refinery? I use some module mods where each speed module is x16. Where I don't have that issue is with the assemblers, they love speed modules.
Interesting problem, perhaps use a Small Cargo Container as a buffer point? If the sorters are limiting it that will show you right away I'd think. Perhaps some creative testing may be necessary. Edit: further research and testing says it is the sorter that will be your problem, they are limited - use more sorters to solve the issue is the easy fix.
@@strixfiremind Thanks, yes, I agree, the sorters are the problem in SE, I am looking for a large capacity sorter mod. I think multisorters for a single input or output are a bit cumbersome.
@@oscargaming7582 I've only seen one called "Fast Conveyor Sorter," but have not tried it. My sorters are super fast since I set all the inventory sizes to max in advanced configuration settings for my save. Make sure they're on and "Drain All" is on as well.
Honestly? I put refineries in all my mining stations that specifically deal with the stone and ore on site. the material you get from it is generally worth the effort, but actually transporting it anywhere is pointless. Why would you waste valuable cargo space on fricken rocks instead of the actual ingots your after and an occasional mixed ingot shipment? in fact, pretty much the only thing i'm willing to ship in it's just pulled out of the drill form is ice.
Once youre up to the refinery basic refinery is useless. Never use power efficiency mods total junk. Yeild mods are a trap and will slow your rate of production down from 500% to 180% per min. Speed mods are the only one worth using and are a must. Dedicated refinery per ore is a trap just like high vs low sorting. Use a 3 sorter node system and include an overflow. Ie have one that prevents cobalt, one that only allows iron, 1 only stone, etc as needed but use the third sorter to allow everything in if its dedicated ore isnt present. If youre having power issues use large reactor and no chance youre running low on power for an industrial complex. That timer block system seems like you have a bunch if mistakes in your logistics prior to this step.
![Lil Uzi Vert - We Good [Official Audio]](http://i.ytimg.com/vi/DrSfBULAsek/mqdefault.jpg)
Awesome video! Just wanted to add something: I really like compact ship and base builds, so while the basic refinery isn't power efficient, I'd never say its useless, since its way smaller, thus, lets you build small vessels while still having the capacity to refine some ores :).
Just what I was looking for. Great video!
Awesome!
the last one is a cool idea, could feel more immersive, for people who care about that.
Add an event controller to it as well, monitoring the refineries storage. Open all valves (so to speak) if they go empty.
when not using Isy i usally like 2-4 refiners. 1. Stone and scrap 2. low tiers metals 3. Hi tier 4. CO gets its own . Sorter in> cargo buffer > refinery > sorter Out Ingot> Cargo Buffer > Assembler..
Yes, Co definitely needs its own refinery. Thanks for sharing your set up
Honestly I'm happy with the first one.. But you've given me Ideas for sure
On my large space station I’ve added a rout for stone to go through to a decent amount of basic refineries solely for stone
And the last ones pretty cool and fun, it’s like a “focus mode”!!
Basic take forever a lot of pcu and space compared to a reg refinery with 4 speed mods which will process 100s of ks of stone in minutes.
I like your 4 refinery setup, only thing id change is to add like 4 basic refinerys down the open middle of them with sorters on both ends to force only stone through them. Tbh though I usually just use Isy's Inventory Manager script.
So I've actually run the four with isy's manager. It works fairly well, and since it balances and cycles through the ore, it makes this system way more efficient.
yield module is the only module
Ive discovered i like a dual refinery setup, with sorters in and out on both, one refinery has all speed modules and the sorters only allow fe si ni co and stone, the other has all yield and refines all the higher value ore, i usually just eat the power cost, i love those speed and yields too much
i still have very old save where i build my base into asteroid; i first had refinnery for every ore; all connected intput and output filters, all connected to main logistic system and storages. later i added had 8 refinneries for every ore; all controlled by similar filters.
only issue was that ore was distributed very unevenly in expanded version., but everything was done. with that many refinneries i just went with yield modules, speed was just concern of adding more refinneries.
Hi I'm not great with the automation. I was wondering if you could explain how you set up the Last set up with the timer blocks and buttons
Buttons and Timers for Control:
Button Restore Default: Resets the system by triggering the “Timer Block: Default.”
Timer Block: Default - With a 60-minute delay, it reactivates the default sorter to allow all ores except the prioritized resource (e.g., iron) to flow, disabling the iron sorter.
Button Iron: Initiates iron processing by triggering the "Timer Block: Iron."
Timer Block: Iron - Activates the iron sorter, deactivates the default sorter, and starts a countdown to revert to the default configuration.
Ore Intake and Sorting:
Ore Intake: Ores enter via a connector and are directed to Ore Storage.
Sorters:
Sorter Default - Allows all ores except the prioritized resource to flow to the refineries when active.
Sorter Iron - Whitelists only iron ore, allowing it to pass when activated.
Sorter Ingots - Set to whitelist only ingots, ensuring refined materials are directed to Ingot Storage.
Clean Out Function:
Button Clean Out: Triggers the “Timer: Clean Out on,” initiating the clean-out process.
Timer: Clean Out on - Activates the Sorter: Clean Out to remove all ores from Ore Storage, draining them when necessary. It also starts a secondary timer to turn off the clean-out process after 30 seconds.
Timer Clean Out Off - After a 30-second delay, deactivates the clean-out sorter, returning the system to its normal sorting configuration.
Sorter Clean Out - Configured to drain all ores when active, helping to empty ore storage during a clean-out.
Ore Processing:
Ore Storage directs ores to the Refineries based on the active sorter:
Prioritized Resource (e.g., Iron) flows to the refineries when its sorter is active.
Other ores flow through the refineries when the default sorter is active.
Ingot Storage:
Refined materials are stored in Ingot Storage after processing in the Refineries, with only ingots allowed to pass via the Sorter Ingots.
This system’s modular design allows for adding similar sorters and timers for additional resources. Replace "Iron" with the desired material, and the system can process each type of ore independently. The "Clean Out" function is a flexible addition that can quickly clear out storage when needed.
I hope this helps.
I like the more simple setup for finery you've got with the four refineries. The bigger ones it's like that would be a nice to have somewhere but it's almost too garish.
Yeah, that is my go, too set up. The switching one is novel, and it may work with ores that you need to prioritize (such as one for magnesium and uranium). You could add that into an existing system.
Hi, I am highly interested in your last method, I build VERY large motherships and I want to streamline the process (by choice)
I don't do event controllers but if you can do one for a specific ore and one for cleaning it (next to the L cargo container) I can set up the rest.
I could then make a video showing your set-up on my ship.
Thanks.
@@oscargaming7582 sorters. I set my refineries up so a sorter pulls ore into the refineries, isolates the refineries so only certain ores go in each refinery, and then other sorters pull the ingots out to the assemblers. It takes a bit to set up but keeps you from having to manually shuffle if cobalt or something is blocking iron. It's also slightly more spacious, but I don't think that's a huge issue for most people.
@@videowatchaccount Correct, I agree that is a reasonable approach, at the end of the day, you are alone in a world, we have plenty of space, lol
Another thing that I have been having trouble with it the speed of the ore feeding into the refinery, with all speed modules, sometimes the intake of OREs is not fast enough. Is there a limit in wich the sorter can "push" ores into the refinery?
I use some module mods where each speed module is x16.
Where I don't have that issue is with the assemblers, they love speed modules.
Interesting problem, perhaps use a Small Cargo Container as a buffer point? If the sorters are limiting it that will show you right away I'd think.
Perhaps some creative testing may be necessary.
Edit: further research and testing says it is the sorter that will be your problem, they are limited - use more sorters to solve the issue is the easy fix.
@@oscargaming7582 There may also be mods to increase the speed of sorters, if you’re into using that as a solution.
@@JoshuaKA02 Very much so, I never thought about that, thanks, sounds like a great option, can you point me to a particular mod?
@@strixfiremind Thanks, yes, I agree, the sorters are the problem in SE, I am looking for a large capacity sorter mod. I think multisorters for a single input or output are a bit cumbersome.
@@oscargaming7582 I've only seen one called "Fast Conveyor Sorter," but have not tried it. My sorters are super fast since I set all the inventory sizes to max in advanced configuration settings for my save. Make sure they're on and "Drain All" is on as well.
Honestly? I put refineries in all my mining stations that specifically deal with the stone and ore on site. the material you get from it is generally worth the effort, but actually transporting it anywhere is pointless. Why would you waste valuable cargo space on fricken rocks instead of the actual ingots your after and an occasional mixed ingot shipment? in fact, pretty much the only thing i'm willing to ship in it's just pulled out of the drill form is ice.
Why Keen cant facilitate to us and each refinery have a alterable priority ore list
Because it's all about modularity. And if you want to oppose it, you will be banished, same as Factorum.
Song at 6:30 ?
also great video :)
Sorry it took a bit longer then I wanted but after listening to it I think it is "Morgan" by Mark Grundhoefer.
Once youre up to the refinery basic refinery is useless.
Never use power efficiency mods total junk. Yeild mods are a trap and will slow your rate of production down from 500% to 180% per min. Speed mods are the only one worth using and are a must.
Dedicated refinery per ore is a trap just like high vs low sorting. Use a 3 sorter node system and include an overflow. Ie have one that prevents cobalt, one that only allows iron, 1 only stone, etc as needed but use the third sorter to allow everything in if its dedicated ore isnt present.
If youre having power issues use large reactor and no chance youre running low on power for an industrial complex.
That timer block system seems like you have a bunch if mistakes in your logistics prior to this step.