DIY Arduino Domino Layer P2 - Bluetooth & App upgrade
HTML-код
- Опубликовано: 17 июл 2024
- How to add Bluetooth remote control to your 3D printed domino laying machine. 👇 Component links, info, and code below 👇 This project was kindly sponsored by PCBWay. Take advantage of PCBWays offer for new members at www.PCBWay.com
Drive it around and lay impressive domino runs using an app built with the free Blynk service via a bluetooth connection. It's my favourite way of playing with this machine (when I get the controls back from my family!)
This is the second video in this two part project series. The first video is available here: • DIY Arduino Automatic ...
Using some basic electronics this machine can line up well spaced rows of wooden dominoes. You can drive it around corners, forwards and backwards - just don't drive into your already laid dominoes. You can enter a list of instructions to your robot via the Arduino IDE, upload with USB and then send it on it's way to follow your instructions, or you can open the phone app and drive it live via bluetooth.
List of items used in this project and where to find them:
■ Elegoo Arduino Uno (x1) - geni.us/ArduinoUno
■ Micro continuous rotation servo (x1) - geni.us/360MicroServo
■ Micro 180º servo (x1) - geni.us/MicroServo
■ LM317 DC-DC Converter (x1) - geni.us/LM317
■ Six AA Battery Holder (x1) - geni.us/6AABatteryHolder
■ AA Batteries (x6) - geni.us/AABatteries
■ 1:90 TT DC Motor (x1) - geni.us/1-90GearedTTMotor
■ L298N Motor Driver (x1) - geni.us/L298N
■ Limit Switch with roller arm (x2) - geni.us/ContactSwitch
■ 1602 LCD Shield with keypad (x1) - geni.us/1602LCDKeypad
■ HM10 Bluetooth Module (x1) - geni.us/HM10Bluetooth
■ M3 and M5 Bolts - geni.us/NutsAndBolts
M3x6 (x2) M3x10 (x21) M5x15 (x2) M5x20 (x2) M5x25 (x1)
■ Rubber Bands - geni.us/RubberBands
■ Dominoes the ones I used (x lots) - geni.us/Dominoes
■ 4 Way Wire Connector (x1) - geni.us/WagoConnectors
■ Electrical ‘Hookup’ wire - geni.us/22AWGWire
■ Filament for 3D printing:
- Silky silver from Geeetech: geni.us/GeeetechSilkSilverPLA
- White PLA: geni.us/GeeetechWhitePLA
■ Velcro Cable Tidy (for domino ejector) - geni.us/VelcroCableTidy
These are some of my favorite tools I use and can recommend:
■ Battery-powered glue gun: geni.us/BoschBatteryGlueGun
■ Bosch Bit Driver: geni.us/Bosch-Screwdriver
==========
The code can be downloaded from here:
github.com/DIY-Machines/RC-Do...
Guides for programming, FAQ, wiring diagram and helpful people available here:
www.diymachines.co.uk/rc-domi...
3D printed parts can be downloaded from here:
www.thingiverse.com/thing:469...
Support the channel with a one off donation and enjoy the not-yet-patented Rapid Domino Reloader Stick and some extra accessories to print for your dominoes: diy-machines.selz.com/item/ra...
==========
SAY THANKS:
Provide continual and dependable support through Patreon:
Support us on Patreon: / diymachines
Buy me a coffee to say thanks: ko-fi.com/diymachines
SUBSCRIBE:
■ / @diymachines
DISCORD server: / discord
INSTAGRAM: diy_machine...
FACEBOOK: diymachines/...
PATREON: / diymachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video was sponsored by PCBWay.
This video is shared for demonstration purposes only. 
Хобби
Your channel deserves a billion views. But don't despair. Once the RUclips algorithm kicks in and recommends your channel, it will start to fly.
Wow, thanks. That would be crazy if that happened. :)
@@DIYMachines You may want to use more tags. Tagging your videos really helps to promote your channel. Adding cats or dogs to your videos also helps a lot.
Great video, thanks!
You're welcome. Glad you enjoyed it.
Nice mod. Almost exactly the one I meant while you presented the original one live :)
Hope you enjoyed it!
Any work on getting a workable app to replace the broken Blynk app?
This is a wonder that I see no other comments so THis may be the first comment on this video, Sir when will you make a 3D printer on this channel, hope it's your next project
Yes, you did make the first comment. It is on the list and I have some parts ordered in for designing around but there are a few more projects I'm working on before it.... hang in there. :)
@@DIYMachines Thanks, Sir, I am waiting for it : ) I appreciate the time you are taking to create these projects.
When I try to scan the QR code with Blynk app, I get an "Invalid Static Token Format" error. Is there another way to load this configuration into Blynk? Thanks for the great project!!
i too am having trouble scanning the QR code. I have built the domino layer but cannot use it!
Cool🔥😍👍
Thanks. :)
@@DIYMachines 👍
Error message when attempting to scan the QR-code: "Invalid static token format." The only place I can find the QR code is at the 5:58 mark of this video.
Also, I looked everywhere for the location of the QR code in the phone image at the said 5:58 mark, and cannot find it. Anyone else run into this and find a work-around?
I dont know how i landed her
But i think i need to buy a 3d printer
All these possibilities
Go for it, I haven't regretted buying mine. :)
+
Is this because I'm Russian, or this guy smiles too much?
I smile a lot because my grumpy face is much worse!