BEST First Airsoft Gun Upgrades
HTML-код
- Опубликовано: 13 окт 2024
- Get fit with the like the special forces: pariahgroup.my...?
Airsoft upgrades can be a very scary thing for beginners, so we are here to simplify, and tell you all you need. Today we take a look at the best first upgrades for your airsoft gun. Of course this is all just my opinion. However I feel these parts are the best bang for your buck, upgrades that you can buy. I personally like to wait until things break to go much heavier intro upgrades after these items.
MY KIT:
COMBAT PANTS: amzn.to/4cG9bi3
COMBAT SHIRT: amzn.to/4b0GOtD
GOPRO: amzn.to/3Rzj3ll
SCOPE CAM: amzn.to/3VH00bk
Microphone: amzn.to/3XwletX
NIGHT VISION: goodnitegearsh...
Mask: amzn.to/4ejs8Zr
EAR PRO: amzn.to/4b1u8Cx
3D PRINTER: amzn.to/3RaHZ1L
ALL AIRSOFT TIPS PLAYLIST: • Kraken's Airsoft Tips
#airsofttips #airsoftgun #airsoftgameplay
BEST Airsoft AEG Upgrades | Easily Improve Your Accuracy
• BEST Airsoft Upgrades
Its really nice to make video for beginners. Big thumbs up bud, support from the Philippines. 🙂👍
Always appreciate the support bro! Thanks so much!! 👍🏻👍🏻👍🏻
@@kraken_tactical anytime bud🙂👍
Na pin toss 👍
69 like 😏 nice
Same
You’re literally a mind reader bro, been wanting to start upgrading on my gun but didn’t know where to start
Ayyye awesome bro!! Glad I could help 👍🏻
Barrel nub hop up bucking gate titan wire up deans add inline fuse if there isn’t one. Later change motor after some research on what you want
Same
@@kraken_tacticalquestion What would u recommend the most for cqb the upgrade
I have done 5 hours of research and you are correct, the most suggested upgrades for aeg rifels are the prometheus 6.03 and the maple leaf 70
Is the barrel the one that is 363mm length.
I’m a beginner who just bought my first rifle witch was a G&G cm16 raider
Is the barrel you and him recommend the right barrel I should purchase?
@@devynbaumer344 also curious on which one he is using in video mm wise
@@devynbaumer344 I have the same gun and i was wondering if u upgraded it yet. I want to but idk what to get
@@OxiClean9724
Easy method here is to remove your inner barrel and measure it. Then you will know what length you need to replace it with.
Watch a guide on how to remove your inner barrel, it's easy but you can damage your hop-up if done incorrectly.
Don't be put off it's a simple job and you do be doing it after games to clean the inner barrel.
I just got into Airsoft and am so confused about upgrading thank you so much for this video very under rated RUclipsr quality is 100%🔥
Awesome bro! So glad I could help! Thanks for the positivity 👍🏻👍🏻👍🏻
You're right in the mentality of upgrading when it breaks, you should always look up what the gun you're gonna buy has as weak points (example: ares airseals), I would also suggest when upgrading use parts from one company... As an example if you're gonna use shs gears and intend on changing up everything else, use shs parts, that way everything marries up properly and the wear on the parts is equal. This way you don't have to change parts gradually because they are wearing out at different speeds due to different quality of metals or quality as a whole. Just my opinion though... Also I mapple leaf buckings are the greatest imo. Great video.
Best upgrading video!! I've been trying to get info on what I should upgrade and this video is the best!!
Ayyye that’s what I like to hear! Glad you found it helpful, thanks bro!! 👍🏻
Idk how you guys don't have more subs ngl.
Haha thanks a ton bro! 👍🏻
This channel is probably my favorite airsoft Channel rn keep up the work guys!!!
Thanks so much bro! So glad you are liking the videos, means a ton! 👍🏻
I have a 4m Lone Stare full metal and i have played with it for 2 year going and no problems. All is still standard. My first upgrade would be as you said,barrel,hop up and then the rest if nothing breaks before the upgrade. Thanks for the video.
I know buying upgrades when my gun is completely fine is a waste, so here I am cant wait for it to break
Haha I’m right there with you bro 😂😂😂
Just yeet it at the wall, then upgrade and fix it all you want :D
Also I just watched an add, great to see some ad Rev!
Ayyye thanks bro!!
Lmao “sushi vlogs”
Just found your channel, I’m amazed by the production quality! You got a subscriber
Thanks bro!! 🙏🏻
Underrated channel. You have a lot of potential!
Means so much bro! Thank you! 👍🏻
My advise, TNT barrel and TNT TR-bucking. Will hop almost every BB weight and the barrel is nice, smooth thick steel with a barrel stabilisation expansion at the barrel end (comparible to the crazyjet barrels).
Also check if there is (enough) compression in the cylinder set-up. If not regrease it, regreasing is a good overall habit to do
By accuracy he means precision and to sort that out don't buy an inner barrel just yet as a barrel alone has little or no effect on precision unless your stock barrel is like 6.05 or over which is very unlikely, just do an S-hop mod, make your own flat hop bucking with your stock bucking or buy a normal one and mod it for less than half the price of a dedicated flat hop bucking and pair those with an omega nub or a flat hop nub (you can make flat hop nubs yourself out of erasers if you don't want to buy one) this is guaranteed to give you greater precision with your groupings and also gives you the ability to hop heavy weight bbs, you can do this on a stock hop up unit also you do not need the rotary type they are just useful for the clicks giving you an incremental adjustment and making it easier to adjust because of the large wheel as opposed to a small cog, that is literally it, if your stock hop unit is coming undone then all you need to do is tighten the screw that holds the adjustment gear/knob on. This mod is very very easy and super cheap, you could do it for around $10-$20, you don't need to spend a lot of money to get a noticeably better improvement. If this hasn't improved your precision then it's time to change your barrel for something that is around 6.03, barrel should be last on your list of improving accuracy.
Don't just go buying a gate titan off the bat which is the most expensive out of gate's products, airsoft techs will hate you for doing so anyway, you will look at it wrong and it'll break, buy a warfet instead for half the price, does like 90% of the functions a shitan sorry titan does without the horrendous mess and unreliability of a gate titan (look at negative airsoft on YT if you don't believe me)
I do however agree with upgrading the motor for a higher torque one, again you don't need to be spending a lot of money to get a decent spec motor, i recommend JG blue.
Bro your channel is very underrated, also i want to get to airsoft but i dont really know how to start, any reccomendations?
Thanks so much bro!! I would start by renting personally, make sure this is a sport you want to invest in, then I would recommend getting a G&G combat machine, these guns are very low cost and have incredible performance. A lot of Airsofters will start out with these guns and slowly build them into absolute monsters 👍🏻
I want a better trigger response and was thinking of getting a 11.1 Lipo instead of my 9.6 and then also getting a torque motor. By doing this I realize that I’m putting more stress on my aeg so is there anything else I should be looking into when I buy these upgrades? Do I need to get a new spring as well?
Wow the quality of these vids is really good, keep them coming! Very informative
hey man, you should do a series about everything to do with upgrades and teching coarse, even if you put out a paid coarse I would love to see that from you
That’s actually a really awesome idea bro! I’ll definitely do something like that for ya ✌🏻
but if i switch stock motor to a hig torque motor, wouldnt i need to switch my gears too??
No sir, just the motor 👍🏻
Ah okay.. I just got told if i was gonna switch my motor i need to upgrade gears otherwise it will break or sumting. Ty
i only put a motor in my kwa aeg because it broke within a week of owning it but with the new motor feels awesome
I feel like Jack Bauer and Peter Dinklidge had a baby.... and it's this guy. Great video bro.
Are there specific parts for different guns?
dude the quality of your videos are always dead on man keep up the great work. i wish you did a break down on people having trouble on getting the rail off once i got my tiny bolts off my dam rail just wouldn't come off for me to get my tip off my t6. i have the mod 1 loaded up but i don't wanna damage it any advice would be helpful
Thanks a ton bro!! 👍🏻👍🏻👍🏻 to get the rail off there are actually 3 bolts to take off, two on one side and one on the other. Then ya just gotta yank it till it comes off 😂👍🏻
Can I take my lancer tactical to a shop and have it upgraded by them or do I have to do everything on my own? Great video.
I use a Tippmann m4aeg and the Motor in it is acctually fairly good out of the box, the internals are all metal and it’s a great gun, im thinking of getting a new barrel because I’ve used mine for a couple months and feel I need a upgrade but overall it’s a great gun, tippmann makes great paintball and airsoft stuff
Are there any good upgrades for a revolver?
no idea
I have just put the promy bucking and barrel with maxx hop in my G&G
Nice dude! How is it? 👍🏻
its reaching out to 240 ft
If you don't mind me asking what battery do you run? 11.1 or 9.6, also what high torque motor did you end up upgrading to did? And did you happen to upgrade your spring at all? If so what did you upgrade to? I have a kwa km4 commando I bought a while back that still shoots like a dream I just want a little more fps out of it for big games and such. I'd like to shoot as close to 400fps with .25 as possible lol
Dunno bro . I prefer the old lonex blue dial hop ups over just about anything . I've shot 10s of thousands of rds through mine and they all hold great . 100% agree with the bucking choice though.
The barrel you recommended at the beginning of of the video would that barrel work on a G&G cm16 raider?
Super sweet videos your totally ab to blow up 🤙 not a lot of airsoft youtubers are doing any videos on editing, given your background it would be awesome to get some tips on what you do with your raw footage
Ayyye thanks bro!! That’s a great idea I’d love to do something like that 👍🏻
Build the M14! We don't see them on the field anymore where as a few years ago they were everywhere, Wolverine Hydra Gen2 in a M14 would be cool
And if you get the Hydra Spartan edition you can semi lock it or set burst modes
That would be super sick!!! 👍🏻
@@kraken_tactical I've been looking at the new G&G M14 Scout that has the electronic trigger but I tried going back to AEG after running HPA for so long and it's not the same there is absolutely no cycle time with HPA obviously and you can't beat the consistency
isaac shively just try to focus on placing your first shots accurately
Dude!! Amazing quality content👌
I love the video and icing on the cake a fellow Canadian
What size barrel would you recommend is the biggest one the best
Keep up the good work
ight, I want to do a barrel upgrade. What would i need. I have the G&G Wild Hog 12". I love your vids btw, Keep it up
I am getting into airsoft but I don't know what kind of gun to get.
Which gun do you recommend for a beginner like me that is under 400 dollars
CAD
I just made a flat hop nub with a eraser and adjusted my macron yellow and hyper polished guns barrel and added a prowin next is a gate it’s a Firehawk already have a better barrel gonna get a new ris soon too and that’s just my back up lol
Nice bro that’s actually sounding like a great setup 🤙🏻
Kraken Airsoft yeah hook up a cleaning rod to a drill with a cotton attached and slowly buff it front to back then reverse slowly ramping up speed I personally use barrel cleaner then one with a slightly damp one (water) then I double down with a dry cotton I find that those round makeup cottons work well and cut them into strips.
Excited I’m gonna start my first job soon so I’ll be able to purchase upgrades and new guns, I’m going to purchase a P90 soon and hopefully upgrade it quite a bit
Just a heads up but the P90 is one of the harder guns to find aftermarket upgrades for and even harder for even some of the more experienced techs to get right. Get what you love and don’t let performance and upgrades determine it but it’s good to keep in mind
If the hop up is the only thing actually touching the bb how is the barrel changing it
whats the model on the kwa ? im looking for my first rifle and i think it sounds very nice
Make sure you learn the difference between a high speed motor , and a high torque one , high speed is faster but can pull less weight so use one if you have a lower fps spring . A high torque one is slower but can pull a heavier spring
Good point! I should have illustrated that better in the video 😂👍🏻
Not true Iv seen high speed motors pull heavy springs like the A2 for example I’m actually waiting on my brushless motor to come in and see how that does high torque motor with lower weight spring can give you great trigger response and rps as well
@@windycityairsofter1449 It's true, just depends on the motor. I mean, you woudn't use high speed motor for M150 or M160 spring, right?
Where do you recommend buying a airsoft gun like a 1911
How do u not have over 500k your litterally the goat
It would be sick if you made a video about that gun and every upgrade you’ve made to it so we can see. Anyways amazing video your quality is great. I subbed
you should try out a maple leaf macaron bucking
Yeah for sure! I have heard great things about those too 👍🏻
What is your opinion on the modify flat hop bucking? Do you use the black one for heavier bbs?
I love it! Would recommend it to everyone, I personally use the softest grey one. Hops .28s and .32s like a dream. But that’s the heaviest I’ve ever gone with it 👍🏻
What hop up you use?
SOMEBODY GET THIS MAN SOME MORE SUBSCRIBERS
Ayyye thanks so much bro!! ✌️
Do the lenght of the Barrel matter in terms of distance you want to hit? Of course, with real guns that's the case, but does a shorter barrel on an saeg truly shortens potential long range shots?
He deserves so much more subs my guy is a lifesaver
Ayyye thanks homie!! ✌🏼
@@kraken_tactical I am really interested in the ronin T6, what are all the specs on your custom build?
Yo, I was thinking of getting a cheap gun to get into airsoft. Should I get one for like 100-150-200 then upgrade it?
Yeah honestly that’s not a bad idea 👍🏻
Hey Sushi bro I really recommend a Helios Knight's Armament From Evike it’s 207 but I saw it on sell for 175 me and my friend run this gun and it’s just beautiful looking and shoots very well
@@ivannocap8416 yuh, i love mine, my only gripe with it is the gearbox is amoeba but otherwise range is great , the trigger pull is a little long but is snappy as hell
ARP by gng is really good
What would you say is the best m4 for modding?
Idk how to install a gate titan or put any AEG back together correctly after I take it apart so I will have to find someone to build it for me lol
my LT-15 came with a 6.03 barrel. Why change it to a different brand 6.03?
Just bought helio knight armornent sr 16e so if I buy a barrel are they easy to put n along with the bucking is that easy to put in aswell ???? Thx
Is it bad that i took my 200$ valkan asl+ (idc hate it its goated from my experience) and threw in a prometheus 6.03 and krytac spec hop up and while it helped a good bit its not leagues better than the thing stock 💀
What is the length of the inner barrel you got
Sup kraken what is your opinion on dsg setups?
I think they are awesome when they work, however most people who want them aren’t tech savvy and they break all the time 😂👍🏻
Dsg’s eat up internals quickly if you’re looking for an upgrade for trigger response gate titan and better motor are rhe ways to go
What’s a good hop up for my AEG? I was looking at some but I can’t make up my mind.
I personally love the krytac ones 👍🏻
Kraken Airsoft would those work in other aegs to?
@@yaru3116 it should work in other aegs too. Before I had my Maxx Model hopup unit, I used the Krytac ones in different aegs and hpa guns without a problem. Would definitely look into the Maxx Model too if you are looking into a decent hopup unit (but it costs a little more than the Krytacs)
Usually the stock hop up is the best, unless you have those ancient ones where you twist little dial. In that case, you can get a rotary hop up.
Your hair grew back pretty fast lol
How do you know if the parts will fit on your gun?
I would say best upgrade for age is a gate titan makes it feel hpa
personally i like the zion arms nebula mosfet
What would you upgrade on a scorpion evo?
Ie do you know if evike is still shipping guns to Canada
Can I order a uprgradeed airsoft gun online or where can I take mine
great video itk made me want to upgrade my gun thanks
Thanks bro! Glad you enjoyed it 👍🏻
@@kraken_tactical can you give sarenity airoft a shoutout
Thank you!
I wouldn't say that Prometheus is holy grail of barrels when EdGi and PDI exist, as well as lack of QC on Prommy barrels... Cheap, but good option is to get ZCI barrel and lap it.
Sorry but what do you mean when you say lap it? Zci seems to be a great choice rn
@@Sandaco Lapping is procedure for removing inconsistencies in the inner barrel.
can you please make an upgrade list with links below please
now I was told not to open the trigger box and gear box because it breaks the screw glue and "the vibrations from the gun can cause it to come loose" is this true and should I do the upgrades on my trigger box
never heard of it and I've done lots of builds ;) if in doubt, you can always use some blue locktite to set the screw back in
What motor would you recommend for a kwa qrf mod 1?
Definitely the lonnex a2 Titan, it’s a little pricey but I put it in my gun and she rips!! 👌🏻
Where do you get your parts from?
Thank you so much
Best upgrade video
What length inner barrel do you have in your T6?
I believe it’s a 155mm 🤔
Kraken Airsoft nice vid bro, I’m been thinking about this ALOT... the stock inner barrel is 184.15mm, isn’t 155mm significantly shorter? Wouldn’t a longer inner barrel provide better accuracy? Why did you go for the shorter one? I’m trying to decide if I should get the 155/ 185 thanks!
What is that base gun?
I have a 6.01 mad bull 300 barrel is that good?
Not bad at all! 👍🏻👍🏻👍🏻
Sweet looking at changing motor next handle gets too hot running 11.1
Might just go hpa
Please don't buy angel custom inner barrels
Especially if you have a gun like a krytac it's just a downgrade
Good to know 👍🏻
Yeah Angel Custom internals are mostly garbage
I will say I added one to my girls ares amoeba DMR build it works better than the stock brass but I also hyper polished/buffed tf out of it.. hook up drill to cleaning rod add more cotton than normal and slowly speed up from one end to another crazy difference
@@tradesmith_yt did you add any compound?
waffle Nator yeah some slightly gritty metal polish made sure to run back through quite a few times to clean it up so nothing was left behind
What size bb u run?
6mm 0.28g
What is the best upgrade
Okay, I know what should get upgraded, now.. how tf the gun work and what makes up its internals, gotta learn how this shit works before ya start playing with it haha. Which actually worries me cause I dont wanna waste the money on a gun I take apart and cant figure out how to put it back together, or even worse, buying it and taking it apart and trying to learn what I'm looking at but still getting nowhere haha
*Cries in wierdass KWA hopup unit*
Hey pal! Just done the Titan upgrade on my Ronin T6! Having some issues with batteries getting hot... Don't suppose you could tell me your current draw stats from GHS? I'm pulling 60AMPS burst and the battery gets hot :S Thanks dude x
make sure your motor teeth are aligned
link to barrel?
can you give me website where you boughtit
Flat hop .... lmfao
I can't get the ICS lightway peleador in italy, why?
Hmmm that’s super odd. I’m not sure 🤔
@@kraken_tactical like i went on the website but theres no where to order it... oh btw would you reccomend it for a beginner like me?
Oh maybe check some stores near you and see if they have it. If not Evike.com is always a great option. They may not sell it through their website.
@@kraken_tactical ok thanks
No worries, let me know if that works 👍🏻
Tight barel and spring hahaha thats ok then wait till break haha
Your quality is killing it 🔥🤙
Ayyye thanks bro!
And THEN, 13:1 gearbox upgrade
Tight barrel might be ok till my gun wasted then ill.go upgrade hehehe
intro change I see
Yesss sir 👍🏻
Not me dropping $300 instantly on a already $350 gun 😢😩
I had a teacher named miss kraken
Next time show us some shooting of that nice gun ! Do a review of a new gun !
Yeah good idea I should have down that. And more guns are on the way. Just shipping is brutally slow 😂👍🏻
Hi kraken so i bought the kp-06 and i really want to get aw custom for 144 dollars.and i want to sell it on this on airsoft website to people who need gbb but i dont know how to tell my parents that i want to sell the gun and that i need a paypal account.pleaseee help bro i really want the aw hx 1102
Just tell them to get a paypal account.
Just don't get that AW, which is just fancy WE, which means it is a crapshoot.
you look like war owls lesser known brother battle bird