Shuttering, traverse are rarely used. Most people just use the white gridflex with the occasional red and yellow ones but not many. If you buy these there's a little spring in the prop head that will eventually fail but they're small and easily replaced. Takes about 45 seconds to replace them but they last a long time.
I built thousands of decks with Peri Skydeck in Chicago and I never thought a deck system will ever beat the Skydeck. Especially in the straight field. Damn we flew!!! Fast as hell and I did notice that there just was alot of pieces. We referred to the little joists as standards and lord it seemed like there was a million of them but the new system took care of that by making basically a rectangle joist panel. Very smart. I was always told in Chicago that Peri was a German invention and company and If you look at my name you'll see why my father spoke fluent German. Lol
After a certain amount of time and holes they will probably throw it away. But they seem to last a long time. It takes a lot of holes to destroy it and it usually gets damaged before it gets that old.
There's no lateral supports which are common to the older scaffold systems. I wonder how much weight this system can actually take. Also what about high ceilings 5m and over?
esos agujeros y tornillos cuantos placas para unir con el aluminio Como se libera al ser retirados. despues de diferentes orígenes que tiempo de uso tienen estas maderas (material que es exactamente el material que se usa en la parte superior y porque se desmolda sensillamente, perdiendo esta caracteristica, hay que lubricaarla a veces) Para las casetadas de 400 a 500 m2 y la altura entre los sueros de 2,50 a 2,90 aroximadamete cual seria el costo del sistema, ¿Cuántos personas tienen? Trabajamos en nuestros edificios y trabajos.
Der jeg jobbet med deres tegnere i Oslo sentrum med og forskale hvorfor fulkte det mensker etter meg på det bygget? Hvorfor satt det altid noen inne på skiftebrakka der min mobil telefon hang inni kleskapet hvorfor satt de der inne og snakket i mobil og spilte? Har det for og prøve og vere liksom så jævla lure att de tenkte jeg ikke har tenkt på det før eller atte folk følger algorytmiskt etter meg
Khalid Alawi when stripping it and using it for other floors the corners would get bent and would cause the heads of the poles to not lock in properly and we used the peri multi prop system for the rest of the job which was much faster and stronger
Boy, I'm not very impressed. It just seems to me a little what I call minimal. When I'm pouring a deck I want to feel over safe. Many years ago we were pouring 2nd floor outside walkways and we were short about 12' of scaffold shoring. We used B decking with wood shoring to fill that in. When we were pouring some of the shoring gave way and it dropped, we didn't go down but to this day I can still remember what that felt like.
And who nails plywood into their tools? After a few installations you have holes all in your expensive form braces? This is a neat idea, but a horrible invention. Plywood is faster, cheaper, and doesnt need to be stored between pours. Congrats, you managed to redesign the 4'X8' sheet.. poorly..
@@OffGridInvestor hye brother pls give me details of peri and how to contact with them am also live in India, Uttrakhand and I started construction related work plz bro
I can see a problem straight away anybody else - lets see it stripped in a real pour situation if it was that easy -you guys are millionaires -good luck
This is used in 60 countries around the world for probably 2 decades and works FINE. Once you understand how the props work it's a simple reverse of how it goes up. Probably using PEP 20-350 props.
Only really need 4 parts, white panel, prop, prop head and tripod every so many bays. Yellow and red infill panels can be replaced by timber 100mm LVL around columns etc from white panel to panel.
Shuttering, traverse are rarely used. Most people just use the white gridflex with the occasional red and yellow ones but not many. If you buy these there's a little spring in the prop head that will eventually fail but they're small and easily replaced. Takes about 45 seconds to replace them but they last a long time.
works better on a completely flat surface. i love this system
I built thousands of decks with Peri Skydeck in Chicago and I never thought a deck system will ever beat the Skydeck. Especially in the straight field. Damn we flew!!! Fast as hell and I did notice that there just was alot of pieces. We referred to the little joists as standards and lord it seemed like there was a million of them but the new system took care of that by making basically a rectangle joist panel. Very smart. I was always told in Chicago that Peri was a German invention and company and If you look at my name you'll see why my father spoke fluent German. Lol
B
Yyyyyy
Now that i like it. Much easier than the Peri i use to work with. I think they was from the WWII era. I Ireland they are still in use today!
Thank you so much for posting . Respect from Vietnam !
Well well well, RUclips recommendations did it again
I dont like that you nail directly into them. Should have a slot for wood that you can replace
I have so much experience with this system it’s good and quick but You still need to use the traditional frames for the beams
Price..???
Please
Dear sir Rply me my email address Sanjay2013.sc45@gmail.com.. I need to talk with you about this
Mohamad Jbara Then a question! What you do with the screws, just tear them off, destroying surface of the elements?!?!
@@GEK69NY we usually use 2 inch nails instead of screws so it's easy for stripping
Mohamad Jbara 👌 got it!
MAN THE COMPANY I HAVE BEEN WORKING FOR is using frames and 4x6's purchased in fucking 1980 lol... i have dreams of using this right here
Реально круто, мне очень понравилось
Very beautiful, gorgeous and very comfortable.
ruclips.net/video/KL2xJzQ0p4o/видео.html
Ростверк по сваям
Привет из России
When you use nails REALLY don't use twist shank nails. Use BASIC straight nails. You'll thank me later.
Well the chippy doesn't care, the burden will be on the strikers :))
ruclips.net/video/KL2xJzQ0p4o/видео.html
But what about hole made in aluminium while shuttering it will affect durability of form work
After a certain amount of time and holes they will probably throw it away. But they seem to last a long time. It takes a lot of holes to destroy it and it usually gets damaged before it gets that old.
WOW !!!!! That looks fantastic !!!!!
What are the prices like ???
There's no lateral supports which are common to the older scaffold systems. I wonder how much weight this system can actually take. Also what about high ceilings 5m and over?
What about drilling a kneel in the aluminium?
What to do to the formwork beams
Its all nice fast ect.. but hiw much preshure it can hold? Can this stand with 50cm thik full concrete slab?
So this formwork is only available for a flat slab structure right? What about RC structure with beam?
Peri has PILES of different options
Чтобы купить таких приспособлении куда и комму обращаться?
esos agujeros y tornillos cuantos placas para unir con el aluminio
Como se libera al ser retirados.
despues de diferentes orígenes que tiempo de uso tienen estas maderas (material que es exactamente el material que se usa en la parte superior y porque se desmolda sensillamente, perdiendo esta caracteristica, hay que lubricaarla a veces)
Para las casetadas de 400 a 500 m2 y
la altura entre los sueros de 2,50 a 2,90 aroximadamete
cual seria el costo del sistema,
¿Cuántos personas tienen?
Trabajamos en nuestros edificios y trabajos.
What is the cost and how many days required to supply, after finalise the purchase order.
Viri good thé work
I think it will difeclt if there are coulombs
Der jeg jobbet med deres tegnere i Oslo sentrum med og forskale hvorfor fulkte det mensker etter meg på det bygget?
Hvorfor satt det altid noen inne på skiftebrakka der min mobil telefon hang inni kleskapet hvorfor satt de der inne og snakket i mobil og spilte?
Har det for og prøve og vere liksom så jævla lure att de tenkte jeg ikke har tenkt på det før eller atte folk følger algorytmiskt etter meg
Will it be safe for slab over 600mm thickness like solid deck slab
First class job
What about the beam,and it's Price
I have a dream to construct like this home in India but I am not finding such a company
Peri is in India.
Çok güzel bu siztemi nerde bula biliriz
Pritish, can I use part of this content to show this system and explain why I believe this system is superior?
Very impressive
I think it is only suitable for flat slab type buildings and concrete walls
Very Nice...
Tuyệt vời
👍👍👍👍👍
Legal que bacana
Can i order a set of this for a small construction or a house building project use?
very good so how much it cost for the slab and column formwork
please call me sir this no 9989966456
မိုက္တယ္
Es sisatam ki prisi kya hai yah milega kha
Very good
عمل رائع جدن 👍👍🇸🇾🌷🌷🇸🇾
good and what would be the cost?
Used this system for 7 floors and it took forever and just caused injuries and took a lot of damage in a short time would not recommend it
What do u mean by damage? And how did it take forever?
Khalid Alawi when stripping it and using it for other floors the corners would get bent and would cause the heads of the poles to not lock in properly and we used the peri multi prop system for the rest of the job which was much faster and stronger
I could see this getting damaged real fast on a job.
👍
PRATIQUE. OUTILS DE TRAVAIL. J'AIME. J'AI BESOIN. ATT
Boy, I'm not very impressed. It just seems to me a little what I call minimal. When I'm pouring a deck I want to feel over safe. Many years ago we were pouring 2nd floor outside walkways and we were short about 12' of scaffold shoring. We used B decking with wood shoring to fill that in. When we were pouring some of the shoring gave way and it dropped, we didn't go down but to this day I can still remember what that felt like.
Applies to Post-Tension?
From where can get it
I like this sistam I want patches this in india.adres plise
very good form work but how much is productivity man/ sqm
At around 4:00 mins the plywood is being nailed down, how are these sheets removed?
And who nails plywood into their tools? After a few installations you have holes all in your expensive form braces? This is a neat idea, but a horrible invention. Plywood is faster, cheaper, and doesnt need to be stored between pours. Congrats, you managed to redesign the 4'X8' sheet.. poorly..
And if you watch the end it takes several hours to put up 4 or 6 pieces. Hardly a time savings, and clearly more expensive than plywood.
How much dis product reat
using this system right now
How can I get this materials?
Good system
wowwwwwwww
I’d like more information including cost please.
Dealer in Louisiana?
Google Peri USA. They'll have this and other stuff you never dreamed of.
@@OffGridInvestor hye brother pls give me details of peri and how to contact with them am also live in India, Uttrakhand and I started construction related work plz bro
Thomas Murray c4 w, ,
A.A
As you l .
TO THE CROWN Xx0e0W21234567890
how much coast all pakage
I liek PERI matarial
where can we buy this system in hyderabad (India )
Look up Peri India
Откуда можно купит
What device is used to check the correct level of beam?
Priyesh Ranveer Ujoodha a laser level
+Haggard shop hi
Price kya h lena h
انا اريد شركة اخدم فيها
I can see a problem straight away anybody else - lets see it stripped in a real pour situation if it was that easy -you guys are millionaires -good luck
This is used in 60 countries around the world for probably 2 decades and works FINE. Once you understand how the props work it's a simple reverse of how it goes up. Probably using PEP 20-350 props.
Pritish chaudhary where in india can we find this? Any price details you can share?
Google Peri India. They have quite a large business in one of the main cities with many employees.
What about beams
What is price........
Muy buen sistema🤔
If you make a sale by selling it then you have to send us your email
verygood!
great!
but what about the slump?
Nothing sags with this. It's German engineered and has been around for years in 60 countries around the world.
Now you are supplied this type
What is price by 100/100 sf pakistani caruncy
Address to purchase in India.
Ring up Peri India
how can i know the cost
cuanto cuesta el m^2?
I want to find out and buy this product. I live in Vietnam
Peri is very big in Malaysia. It's also in India.
They're from Germany but i think you did find a dealer in your country.
But to built bims and lintal
what about beams!!!!!
?
What beams, this system doesn't require beams.
So how can we shutter beam side ?
Es vastu ko kaha prapt Kar sacte hy
I want to buy
Don't trust that to good to be true
l am intrest pl how many cost
☺👍👍👍👍👍👍
Pretty smart
where can buy this gridflex in china.
+Acetal Lactone
do you want to copy and resell at lower price?
+Nabiel I I want to buy this peri griflex at lower price even second-hand.
Nabiel I
Hi sir im fork lift operator Dxb license sir I need job sir plz
y en español
sir my dubai peri warking 12 year
Do you have used
Tornado ha ha
A
Slab formwork indian
Anil Dhiman do you know the proxe detail of this?
@@sonanraihing903 ring Peri India and you will find out.
Too many components!
CRAFTYMARCUZ you are obviously lazy!
Only really need 4 parts, white panel, prop, prop head and tripod every so many bays. Yellow and red infill panels can be replaced by timber 100mm LVL around columns etc from white panel to panel.
PEP 20-350 prop, prop head and MOST PEOPLE only use the white gridflex. 3 things. Then ply.
Good system
how to use in beams
How to use in beam shutters
Simply use it ...