Been a huge fan since I purchased the warthog mounts a couple of years ago. Been meaning to purchase the mouse table attachment, I'll get their eventually. It's not cheap gear but damn, it is quality. Keep up the great work.
+MonstertechDe *Thanks for the briefing on new mounts.* My concept of a Universal Simpit for aviation and astronavigation is easiest to execute on a floor frame. Side-rail adapters should be able to nail the heights for VIRPIL® Controls' MongoosT-50CM2® Throttle and Control Panel #1, with a centerline panel for the MongoosT-50CM2 Stick Base (with 200mm extension) and ACE® Interceptor Pedals Set. Elgato Division, Corsair Gaming LLC, may have a satisfactory UFCP in the StreamDeck™ XL; BlackHog has satisfactory secondary console panels in the b-explorer-04 (Model C port, Model A starboard). TekCreations has satisfactory modules in the F-16/Viper AOA and NWS/AR Indexer Set, F-16 Falcon Caution/Advisory USB Status Panel, and F18 Hornet Landing Panel USB Controller. As of December 2020 nobody beats Bugeye® for multifunction displays. I've still to find solutions for the arresting-hook/wing-control/ECS panel, 2 ATI and 1/3-3ATI air-data/radioaltimeter/accelerometer set, 3ATI attitude/yaw-rate/skid-slip, 3ATI RHAW, 3 ATI BDI, 3 ATI quad hydraulic pressure (consistent with the factory HYD PRESS on the USN-USMC/Grumman A2F series), 3/5-5ATI dual engine %RPM/TIT/FF/NOZ/OIL (consistent with USN-USMC/McDonnell F-18A-D), 3/5-5ATI quad fuel/QTY select (consistent with USMC/McDonnell AV-8B), multiple station select buttons, Armament/Land panel (A/A, A/G, Gun Rounds and Rate Select, and three-way Master Arm), Map Gain/IR Cool/Take-Off panel, HUD/HMD SYM panel, and CHF/FLR/JAM/BUNO panel.
Don’t worry about your English. YOU SPEAK GOOD ENOUGH TO GET MY MONEY. You have great products, but, long delay. Can you pay with PayPal at your USA store.
Ha thanks. At the moment the US store is credit card only. I you want to use paypal just order from our monstertech.de store. Prices should be very similar for US orders. We ship everything from Germany anyway.
Nice seeing people inventing and problem solving, totally passionate about his work, a rare breed these days. Looking for a way to attach the cougar MFD's to the warthog hotas mounts, perhaps a quick release, part up back of either side of the mounts somehow.
love your videos. Would love to see more videos for each product. I have the new wall mount and it looks to be constructed differently. Mine has a steel bracket in the print so I bet it is much more stable. A video about that improvement would be really cool. Thanks for all you do.
Your English super 😉 I can’t understand why someone would spend huge amounts on high end PC ..... hundreds on high end HOTAS and Expertly engineered mounts,,, to only cheap out on an IKEA chair and Table,,, it’s shameful 😤😳😫 Love the product range guys ,, Keep up the exceptional work 😁👍
How is the markus mount coming coming together? I just bought a markus and an ikea desk and wondering if i should wait for a markus mount or a desk mount and be done with it. Thanks!
Honestly, if you need a under table protector and can afford a virpil or warthog get a new table before your table collapses and destroys your monitor, PC(if it has glass sides) and your expensive hotas
I'm looking forward for your video about the MTX Rig. I'm going to buy the Fanatec direct drive wheel and the Heusinkveld pedals, so your Rig will be the choice number one. :)
Dieser Test würde mich auch interessieren. Weiterhin wollte ich mein Rig dann später mit „Motion“ upgraden (Stichwort SFX 100) - Vielleicht gibt‘s hier auch einen „Test“ zu. 😬
Cool chairs but very complicated design. We are working on a more universal mounting option but even that one will likely not be compatible with the Ergohuman chairs. Sorry!
This video popped as I was installing my swivel mounts , with my monstertech tools .. outstanding . Thank you .
Is there a way to add a Yoke or Wheel platform to the new Flight Stand ?
Is therere a guide when to use table mounts and when to use chair mounts?
I love noobifiers reviews. Hes quite detailed and makes me drool for most of your products.
COVID - so the budget is tight, unfortunately.
Supersympathischer typ, ich hoffe, die ganze Arbeit lohnt sich für euch. Richtige Einstellung, coole Produkte, macht weiter so
Been a huge fan since I purchased the warthog mounts a couple of years ago. Been meaning to purchase the mouse table attachment, I'll get their eventually. It's not cheap gear but damn, it is quality. Keep up the great work.
What chair do you recommend.
+MonstertechDe *Thanks for the briefing on new mounts.* My concept of a Universal Simpit for aviation and astronavigation is easiest to execute on a floor frame. Side-rail adapters should be able to nail the heights for VIRPIL® Controls' MongoosT-50CM2® Throttle and Control Panel #1, with a centerline panel for the MongoosT-50CM2 Stick Base (with 200mm extension) and ACE® Interceptor Pedals Set. Elgato Division, Corsair Gaming LLC, may have a satisfactory UFCP in the StreamDeck™ XL; BlackHog has satisfactory secondary console panels in the b-explorer-04 (Model C port, Model A starboard). TekCreations has satisfactory modules in the F-16/Viper AOA and NWS/AR Indexer Set, F-16 Falcon Caution/Advisory USB Status Panel, and F18 Hornet Landing Panel USB Controller. As of December 2020 nobody beats Bugeye® for multifunction displays. I've still to find solutions for the arresting-hook/wing-control/ECS panel, 2 ATI and 1/3-3ATI air-data/radioaltimeter/accelerometer set, 3ATI attitude/yaw-rate/skid-slip, 3ATI RHAW, 3 ATI BDI, 3 ATI quad hydraulic pressure (consistent with the factory HYD PRESS on the USN-USMC/Grumman A2F series), 3/5-5ATI dual engine %RPM/TIT/FF/NOZ/OIL (consistent with USN-USMC/McDonnell F-18A-D), 3/5-5ATI quad fuel/QTY select (consistent with USMC/McDonnell AV-8B), multiple station select buttons, Armament/Land panel (A/A, A/G, Gun Rounds and Rate Select, and three-way Master Arm), Map Gain/IR Cool/Take-Off panel, HUD/HMD SYM panel, and CHF/FLR/JAM/BUNO panel.
Don’t worry about your English. YOU SPEAK GOOD ENOUGH TO GET MY MONEY. You have great products, but, long delay. Can you pay with PayPal at your USA store.
Ha thanks. At the moment the US store is credit card only. I you want to use paypal just order from our monstertech.de store. Prices should be very similar for US orders. We ship everything from Germany anyway.
@@mtsim Hi! What seat are you sitting on in this video? I'm interested, it appears a beautiful crafted seat :) Cheers, Scuby
Nice seeing people inventing and problem solving, totally passionate about his work, a rare breed these days. Looking for a way to attach the cougar MFD's to the warthog hotas mounts, perhaps a quick release, part up back of either side of the mounts somehow.
Stable table xD. You kill me bro ahah.
What kit do you recommend to mount each half of my split keyboard on each side of my chair? I also use a trackball mouse, so I don't need much space.
love your videos. Would love to see more videos for each product. I have the new wall mount and it looks to be constructed differently. Mine has a steel bracket in the print so I bet it is much more stable. A video about that improvement would be really cool.
Thanks for all you do.
Your English super 😉
I can’t understand why someone would spend huge amounts on high end PC ..... hundreds on high end HOTAS and Expertly engineered mounts,,, to only cheap out on an IKEA chair and Table,,, it’s shameful 😤😳😫
Love the product range guys ,, Keep up the exceptional work 😁👍
How is the markus mount coming coming together?
I just bought a markus and an ikea desk and wondering if i should wait for a markus mount or a desk mount and be done with it. Thanks!
Would these work mounted on the inside or would they be too low to the legs?
Is there or are there plans to have the mouse extension work stand alone without the joystick mount?
Who cares about noobifier he bans or blocks people that disagree with him! I'd recommend giving it too others as well.
quick question i ordered something from you guys two months ago being sent to the us why does it take so long
We need another update!
How do we attach the mouse extension table to the frame?? Ive been trying to build this for days and HAVE NO IDEA HOW TO BUILD IT!!!! Please help
We finally have a manual in the download section on our website. Sorry for the delay.
Honestly, if you need a under table protector and can afford a virpil or warthog get a new table before your table collapses and destroys your monitor, PC(if it has glass sides) and your expensive hotas
Love these videos.
I'm looking forward for your video about the MTX Rig. I'm going to buy the Fanatec direct drive wheel and the Heusinkveld pedals, so your Rig will be the choice number one. :)
I received the Fanatec DD1/DD2 a couple of days ago, have not had time yet to test it on our test rig but I will probably make a video about it.
Dieser Test würde mich auch interessieren. Weiterhin wollte ich mein Rig dann später mit „Motion“ upgraden (Stichwort SFX 100) - Vielleicht gibt‘s hier auch einen „Test“ zu. 😬
Take my MONEY!
Ok.
Interessant ! Sowas suche ich ! Ich suche ein Gestell für DCS World 2.5 Simulator 😀
Got anything for my Ergohuman chair? ;)
Cool chairs but very complicated design. We are working on a more universal mounting option but even that one will likely not be compatible with the Ergohuman chairs. Sorry!
No worries at all. Looks like some short pole-mount VESA arms might do the trick. Now, if you had something I could screw onto the head of that...
moin suche nach ner lösung um nen saitek x56 am playseat zu befestigen .habt ihr da was?
ps : lebe in spanien
my guy has a stussy shirt lol haven't seen that in a decade or two.
snooooooooore